Patrick, For the last two LRP "upgrades" I have had to resort to using an older, but workable 3c59x.o module. Originally I started out with EigerStein, then went on to EigersteinBETA, and now I am using Dachstein CD V1.0.2 (forgive me on not stating what version I was using on the previous Eiger's).
I have not been able to figure out what is wrong (or maybe my wrong's) with the 3c59x.0 modules that were supplied with the last two LRP release's. I just figured to try what worked before with the older 3com module and everything seems to work. If you would like I can send the 3c59x.o module to you that works for me and let you give that a try. Sorry I don't have any more specific information other than what worked for me. Good Luck, Steve -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Patrick Nixon Sent: Monday, December 31, 2001 12:47 PM To: [EMAIL PROTECTED] Subject: [Leaf-user] Network Card Problem Hello All, I briefly mentioned a few weeks ago a problem I'm having with a specific network card, however, no one had any solid advice and I wasn't sure what the exact problem was so I'm reposting with a bit more information I hope. NIC: 3Com 3C920 Integrated network Card (lists as a 3c905C-TX in some systems) System: Dell Optiplex GX150 Problem: Despite a successful loading of the module 3c59x.o I am unable to receive any data over the network interface. from netstat -i I can see that it's transmitting, just not receiving properly. I have RedHat 7.2 with Kernel 2.4.3-7 running on an identical system, with a 'different' 3c59x.o module and that system is happyhappy. Ideas/suggestions/whathaveyous? --Pat _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user