>>> On 3/12/2009 at 3:37 PM, Alan Altmark <alan_altm...@us.ibm.com> wrote: > On Thursday, 03/12/2009 at 02:40 EDT, Mark Post <mp...@novell.com> wrote: >> > I get an IDX TERMINATE with cause code 0xf6, which I have read some of >> > the archives that said that was a layer2/layer3 mismatch error. >> >> I'm pretty sure that would be a 0x4e error, since I just deliberately > caused >> that mismatch on one of my test systems to check. > > - 0x4E means the adapter doesn't understand what the device driver told > it. Either a bad primitive was sent or the operands are bad. This could > be because you've configured Linux to speak "OSA" but you defined a > "HIPERS" NIC.
Cause code 0xf6 has been caught in qeth recently: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=fc9c24603c4b93d84160e14c0a98a754d4328d15 I am going to discuss with z/VM development whether qeth should catch cause code 0x4e as well. Ursula Braun Linux on System z Development IBM Germany ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
