I have one of those to, it works great. DOS interface only though. Ihave
it on an old networked 486.
Hmm, I wonder if you could use dosemu? It would depend on whether dosemu
can get the parallel port.
Any dosemu experts got ant ideas.
Only problem with EMP-20 is the $25 for a SIMM type PC card, no
electronics. Which yu will need one for 29F040 as the three that come
standard with the programmer don't support hat part. I just had to buy
one for the 29F010...
Plus an adpater for PLCC to DIP which is what the EMP-20 socket is. I
made one using a PLCC PGA socket and soldered it to a 32 DIP socket.
Have to use an extractor everytime, but it saved about $100...
Corwin Nichols wrote:
>
> I highly recommend the EMP-20 from Needham's Electronics.
> http://www.needhams.com
>
> -Corwin
>
--
Jeff Pierce
[EMAIL PROTECTED]
http://pages.preferred.com/~piercej
--
To unsubscribe from this list, send a message to [EMAIL PROTECTED]
with the command "unsubscribe linux-embedded" in the message body.
For more information, see <http://waste.org/mail/linux-embedded>.
