On Thu, 07 May 2026 22:36:27 -0700, Changhuang Liang wrote:
> Add bindings for the Peripheral-2 clock and reset generator (PER2CRG)
> on the JHB100 RISC-V SoC by StarFive Ltd.
>
> Signed-off-by: Changhuang Liang <[email protected]>
> ---
> .../clock/starfive,jhb100-per2crg.yaml | 76 +++++++++++++++++++
> .../dt-bindings/clock/starfive,jhb100-crg.h | 57 ++++++++++++++
> .../dt-bindings/reset/starfive,jhb100-crg.h | 17 +++++
> 3 files changed, 150 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/renesas,ether.example.dtb:
ethernet-phy@1 (ethernet-phy-id0022.1537): compatible:
['ethernet-phy-id0022.1537', 'ethernet-phy-ieee802.3-c22'] is too long
from schema $id: http://devicetree.org/schemas/net/micrel.yaml
doc reference errors (make refcheckdocs):
See
https://patchwork.kernel.org/project/devicetree/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
