Yogesh, With 2.09pre4, you don't need to specify the agpgart.o module. It should be loaded automatically.
You can verify this by setting the runlevel to 3, and then running lsmod at the shell prompt, to see if the module is indeed loaded. What do you have your XSERVER entry set to in the lts.conf file? You should be able to set it to 'auto' and it should automatically detect that you have an i810 based video card, and then it should automatically load the agpgart module. Jim McQuillan [EMAIL PROTECTED] yogesh hasabnis wrote: > Hi Mr Jim, > > After installing the ltsp version 2.09pre4, the below-mentioned > DFE538TX card issue has been sorted out. The workstation works fine in > Runlevel 4. But when I set runlevel = 5 in lts.conf, an Xserver > problem is observed. The workstation is i810-based, so when I add the > line MODULE_01 = agpgart.o, the error I get is " ERROR! loading module > : agpgart.o failed! ." When I use the line MODULE_01 = 3Di810.o in > lts.conf, a similar error is observed. > What should be done ? > > Thanks > > Yogesh > > > > > >> From: Jim McQuillan <[EMAIL PROTECTED]> >> To: yogesh hasabnis <[EMAIL PROTECTED]> >> CC: [EMAIL PROTECTED] >> Subject: Re: [Ltsp-discuss] (no subject) >> Date: Tue, 20 Nov 2001 09:23:16 -0500 >> >> Yogesh, >> >> The 2.2.18 kernel that is part of ltsp 2.08 doesn't support the DFE538tx >> network card. >> >> You should try the newer version of ltsp, currently 2.09pre4. It is >> based on the 2.4.9 kernel, which >> should support that card. >> >> Jim McQuillan >> [EMAIL PROTECTED] >> >> >> yogesh hasabnis wrote: >> >>> Hi, >>> >>> I have installed LTSP 2.08 on a RH7.0 based Linux server. I have >>> configured it for booting two diskless workstations, one with ne2000 >>> compatible ISA adapter and other with Dlink DFE538TX adapter. NE2000 >>> based workstation works very fine. The other workstation with DFE538TX >>> card gives the following error during boot process : >>> Ipconfig : No network devices available. >>> Root-NFS : No NFS Server available, giving up. >>> VFS : Unable to mount root fs via NFS, trying floppy. >>> VFS : Cannot open root device 2:00 >>> kernel panic : VFS : Unable to mount root fs on 02:00 >>> >>> The kernel rpm I am using for this adapter is >>> lts_kernel_rtl8139-2.2-0.i386.rpm. >>> >>> What could be the problem? >>> >>> Thanks >>> >>> Yogesh >>> >>> _________________________________________________________________ >>> Get your FREE download of MSN Explorer at >>> http://explorer.msn.com/intl.asp >>> >>> >>> _____________________________________________________________________ >>> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: >>> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >>> For additional LTSP help, try #ltsp channel on irc.openprojects.net >> >> >> >> > > > _________________________________________________________________ > Get your FREE download of MSN Explorer at > http://explorer.msn.com/intl.asp _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
