Hello Schardenzar, Sunday, December 15, 2002, 3:47:15 AM, you wrote:
S> Greetings. S> Being new to LTSP, I want to check whether anyone has S> any particular opinion about whether a Neoware Capio 504 S> terminal will suffice for building an LTSP proof of concept at work. S> It has no floppy or hard drives, but does have 8MB flash memory, S> 32MB SDRAM and a LAN card supporting BOOTP. S> I can/will give more complete specs if that is necessary. S> Thank you in advance for your assistance. S> - Schard Generally speaking, 32MB SDRAM is by far enough. i386 compatible CPU is required (though my short google search let me call to thought if Geode was some kinda mac thing, which would NOT work with LTSP so far), as well as X11-supported graphics hardware (you know the chipset?)... the LAN-card supports bootp, well, but does it PXE too or do you have the tools to make a bootable disk image for that boot protocol used by that board? Or could you address that flash-mem like a floppy disk (but how to get data there when not booting via network...) and put an etherboot .lzdsk there? -- Best regards, Anselm mailto:[EMAIL PROTECTED] ------------------------------------------------------- This sf.net email is sponsored by: With Great Power, Comes Great Responsibility Learn to use your power at OSDN's High Performance Computing Channel http://hpc.devchannel.org/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net