Iggy,
I have the original wire on mine, it's a big thick black 6mm wire about 18"
long that goes to earth on the body near the strut tower, the size of it
seems a bit over the top.
If Eddie is reading perhaps you could have a quick look at your Gazelle for
Iggy.
You need a minimum of 5/16" hp line, if you have a return line use that as
it's good for 300hp, I have seen the smaller 1/4" line replaced with another
5/16" return but I have found that wasn't necessary. If you have to
fabricate a new line use a minimum of 3/8" for further development and it
helps keep you hp pump as cool as possible.
regards
terry
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Ignacio
Sandejas
Sent: Wednesday, 27 September 2000 4:00 PM
To: 'Membersozdat (E-mail)
Subject: FJ20t questions.
Hey FJ20 ozdatters,
Just doing the wiring in the old Dat today and noticed a spade terminal on
the dizzy. Is this just an earth?
Where or what does this go to?
I have a factory loom but the loom doesn't have a corresponding terminal?
Any ideas?
Also what do people use for the metal fuel lines?
Where can we get it from?
Thanks again guys,
Iggy
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
