I got one for $30 the guy was full of $%it he only one after all, I got it for 
$30 thought oh well if it is good bargain, if not spare parts for a good 
one.  It has 34 ADM 1B on the base of it my uncle said it is off a falcon will 
this be any good for my L20B with an adapter plate?

Thanks
Chris

> Thanks guys I have tracked some down and am going out to the 
wreckers 
> to night to have a look.  The guy said he had heaps and only wanted 
$35
>  each for them as aposed to $80-$110 every where else.
> 
> I'll let you know how I go.
> 
> Thanks again for the help.
> 
> Chris.
> 
>> Chris,
>>       I used a 32/36 DGAV from a cortina, however, I was able to
>>       remove the
>> factory water heated bi-metal spring assembly off the webber and fit
>> the Hitachi spring assembly with very little modification. The results
>> were unnoticeable and even on the coldest days, one press of the
>> throttle and the engine started without any further pressing of the
>> accelerator. Performance was definitely improved, especially since the
>> secondary was mechanically driven.
>> One thing I did consider was to get my factory carbie and modify it so
>> that the secondaries were mechanically driven....but the webber 
seemed
>> like a better idea.
>> Regards,
>>         George
>> 
>> ------------------------------------------------------------
>> George Zouglakis
>> Advanced Engine Management Pty Ltd.
>> 22 Melrich Road                 Phone: + 61 3 9761 3161
>> Bayswater, Victoria              Fax:   + 61 3 9761 3162
>> Australia 3153                  Email: [EMAIL PROTECTED]
>> PO Box 594, Bayswater VIC 3153   http://www.wolfems.com.au/
>> ------------------------------------------------------------
>> 
>> 
>> ----- Original Message -----
>> From: Terry Rudd <[EMAIL PROTECTED]>
>> To: <[EMAIL PROTECTED]>
>> Sent: Wednesday, June 13, 2001 1:26 AM
>> Subject: RE: Webbers Info
>> 
>> 
>>> Chris,
>>>
>>> The Cortina 32/36 is a DGAV carbie comes with a water driven choke
>>> which
>> is
>>> a bit of a pain to connect up but not impossible. These carbies
>>> require an adapter plate on the L20B manifold. The Cortina air filter
>>> can be cut up a bit to fit under the bonnet or you can buy a 9"
>>> filter from Autobarn. The Cortina filter is fairly thin so no
>>> clearance problems on a 1600 but the intake is at a difficult angle.
>>> You can get a manual choke upgrade for
>> them
>>> but to adapt this carbie the cost goes up a bit - so unless you can
>>> track down a complete setup for a L20B you might be better off just
>>> getting a
>> good
>>> S2 Bluebird carbie from the wreckers - ~$50 or so drive away.
>>>
>>> regards,
>>> Terry
>>>
>>> -----Original Message-----
>>> From: [EMAIL PROTECTED]
>>> [mailto:[EMAIL PROTECTED]]On Behalf Of Chris
>>> Williams Sent: Tuesday, 12 June 2001 5:16
>>> To: [EMAIL PROTECTED]
>>> Subject: Re: Webbers Info
>>>
>>>
>>> well i have not put the L20B in yet and I have no carby for it, I
>>> have an inlet manafold that will suposedly take a webber so I was
>>> after some info on what type I should be looking for etc...... I
>>> wanted to go for just a single as don't want to use too much fuel.
>>>
>>> Chris
>>>
>>> > are u changing for a performance (upgrade) reason or is the 
stocko
>>> > one stuffed?
>>> > i like twin 40's on a mild L20b, my old car L18w
>>> > made a huge difference from a 32,36  to twin 40's
>>> >
>>> > Heath
>>> >
>>> > ----- Original Message -----
>>> > From: "Chris Williams" <[EMAIL PROTECTED]>
>>> > To: <[EMAIL PROTECTED]>
>>> > Sent: Tuesday, 12 June 2001 3:24
>>> > Subject: Webbers Info
>>> >
>>> >
>>> >> Hi,
>>> >>    I am looking at puting a webber on my L20B for my 1600 just
>>> >> wondering if any one could give me some info please?  I was told
>>> >> that a 2L cortina webber would be a good option avalability and
>>> >> $$$?  Any advice would be much apreciated.
>>> >>
>>> >> Thanks
>>> >>
>>> >> Chris Williams
>>> >>
>>> >>
>>>
>>>
> 

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to