problem there is it snapped off clean into the head. so there is no way to unscrew it due to it all being inside the head... i could try and Drill it out but am 1. wondering if it can be by passed or if water actually needs to flow through it... and 2. if i can fix it without taking the head off ----- Original Message ----- From: "David Andrews" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, August 04, 2002 2:45 PM Subject: Re: Snapped heater hose in the head?
> Ummm.. i'm sure others will be able to correct me here.. but doesn't that > pipe screw into the block? In which case you could try to unscrew it with > something - dunno what though - then screw in a new one. > > Or you could do a dodgy thing and tap out the jammed pipe and then screw > in another smaller pipe into that one. > Of course that'd be a quick-fix and i'm not even sure if they screw in. > > > >>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<< > > On 8/4/02, 2:23:40 PM, "Robbie Vidler" <[EMAIL PROTECTED]> wrote > regarding Snapped heater hose in the head?: > > > > i snapped the water thingy on the back of the head the one that would > > normally goto the heater > > > i am not running a heater as the whole interior was stripped to be a > > rally/hill climb car... what should i do from here... idon't wanna remove > > the head as i just spent all yesterday putting it back on (after the > > annoying timing chain incident) > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
