Just of the rims ----- Original Message ----- From: "Daniel Kroehn" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, September 03, 2003 8:02 PM Subject: RE: Performance superlites for 1600 ATTENTION GUYS IMPORTMANT INFO
> Of the rims, or of them fitted to a car? > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Chris king > Sent: Wednesday, 3 September 2003 6:55 PM > To: [EMAIL PROTECTED] > Subject: Re: Performance superlites for 1600 ATTENTION GUYS IMPORTMANT > INFO > > Daniel > do you recon you could send out a few pics before then??? > > Thanks Mate > ----- Original Message ----- > From: "Daniel Kroehn" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, September 03, 2003 6:12 PM > Subject: RE: Performance superlites for 1600 ATTENTION GUYS IMPORTMANT > INFO > > > > Yeah, I'll have a talk to Stuey when he gets his 200B struts. My mate > > put his bare rims, 16 x 7 +12mm offset (exactly the same as mine) onto > > his 260Z and they clear everything (guards, struts, brakes, > suspension) > > no worries. He has r31 rear brakes and 260Z struts on the front (240K > > hubs, vented rotor and land cruiser 4 spot callipers). I'll keep you > > guys posted, could be a week or so before I can get around to doing > it. > > > > Cheers > > > > Daniel Kroehn > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Andrew > > Greenbury > > Sent: Wednesday, 3 September 2003 4:26 PM > > To: [EMAIL PROTECTED] > > Subject: RE: Performance superlites for 1600 ATTENTION GUYS IMPORTMANT > > INFO > > > > Hi Daniel, > > > > Can you try them out on another 1600 in your area? Interested to find > > out how well they fit. > > > > Andrew > > > > > Got the rims (16 x 7) yesterday, but I have no tires and no car to > fit > > > them on at the moment. They look sexy!!!!! The new 8 spoke design > is > > > heaps better than the old 10 spoke design. When I test fit them > I'll > > > let you know and I'll take some pictures! > > > > > > Cheers > > > > > > Daniel Kroehn > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On Behalf Of Chris > king > > > Sent: Tuesday, 2 September 2003 2:43 PM > > > To: [EMAIL PROTECTED] > > > Subject: Re: Performance superlites for 1600 ATTENTION GUYS > IMPORTMANT > > > INFO > > > > > > Daniel > > > > > > would it be possible for you to take a few pics of the wheels and > the > > > fit > > > and email them out?? > > > > > > Would there be enough meat on the wheel center to machine at least a > > few > > > more mm off????? > > > > > > Just a thought, very keen to see how it goes!!!!! > > > > > > Thanks Chris King > > > > > > Where abouts are you located > > > > > > ----- Original Message ----- > > > From: "Daniel Kroehn" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Monday, September 01, 2003 1:54 PM > > > Subject: RE: Performance superlites for 1600 ATTENTION GUYS > IMPORTMANT > > > INFO > > > > > > > > > > He failed to mention that part, my stupid fault for not checking > > > myself! > > > > If this is so I might be stuffed, I've got some 16 x 7" > superlights > > > > coming and the manager at performance assured me that they would > fit > > > > properly on a 1600, I think they are 12mm offset. Hey, are you > > still > > > > working for MOTEC? If so could you email me off list, I've just > got > > a > > > > few questions about some of the data logging gear that you may be > > able > > > > to help me with. > > > > > > > > Cheers > > > > > > > > Daniel Kroehn > > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED] On Behalf Of Andrew > > > > Greenbury > > > > Sent: Monday, 1 September 2003 11:00 AM > > > > To: [EMAIL PROTECTED] > > > > Subject: RE: Performance superlites for 1600 ATTENTION GUYS > > IMPORTMANT > > > > INFO > > > > > > > > Daniel, > > > > > > > > Yes, and Ive asked about getting material removed from the hub > face > > > > of a rim to make it suitable for a 1600 in the past, and I was > told > > > not > > > > to > > > > do it because the wheel nut inserts are put into a certain depth > so > > > > removing material from the hub surface would alter how much the > nuts > > > > are holding the wheel on by. From my previous post it would seem > > that > > > > to get a 7in rim under standard guards (and without considering > > strut > > > > clearance etc) would require an offset around the +32mm mark > > > > because of the extra width. ie to make a 7in +12mm offset wheel > fit > > > isnt > > > > > > > > a case of shaving just 8mm off the hub surface, but 20mm. Hence > why > > > > the machining work is done before nut inserts are put in. > > > > > > > > On the other hand, isnt a +35mm offset 7in rim kind of a > standardish > > > > front wheel drive rim spec?? > > > > > > > > Andrew > > > > > > > > > Guys, my mate (mechanical engineer) did his work experience for > > > > > performance wheels last Christmas. All of the Superlites come > out > > > of > > > > > the same casting and the offset is determined by how much is > > > machined > > > > > away from the hub face. So in actual fact, a +20mm offset rim > is > > > just > > > > a > > > > > +12mm offset rim with 8 more millimetres machined off it. I > > > guarantee > > > > > this is the way it is done! > > > > > > > > > > Cheers > > > > > > > > > > Daniel Kroehn > > > > > > > > > > -----Original Message----- > > > > > From: [EMAIL PROTECTED] > > > > > [mailto:[EMAIL PROTECTED] On Behalf Of > Andrew > > > > > Greenbury > > > > > Sent: Thursday, 28 August 2003 11:00 AM > > > > > To: [EMAIL PROTECTED] > > > > > Subject: Re: Performance superlites for 1600 > > > > > > > > > > Hi Chris, > > > > > > > > > > I have been told by Performance that their 16x7 superlite bolts > > onto > > > a > > > > > > > > > 1600 with a 12mm offset too. But with some calcs I don't think > > this > > > > can > > > > > be the case due to guard clearance: > > > > > > > > > > 7in wide with 12mm offset results in a 114mm backspace, or a > 90mm > > > > > distance from the mounting face to outer edge of rim (closest to > > > > > guard). > > > > > > > > > > My 15x6s have a 20mm offset, 109mm backspace, and 69mm > > > > > distance from the mounting face to outer edge of rim, and they > are > > > > just > > > > > fitting with 240K front struts. > > > > > > > > > > Therefore 7in rims with 12mm offset would stick some 20mm > further > > > > > out! The performance superlites in a 15x6 have a 24mm offset and > > so > > > > > would fit without mods; the 15x7s not without flares :) > > > > > > > > > > Andrew > > > > > > > > > > > List, > > > > > > > > > > > > I was under the impression that the performance superlites > were > > > bolt > > > > > > on but when i rang the guys about the sizes i was told that > 15x7 > > > for > > > > > > 4x114.3 pcd were only available in 12mm offset. There is a > > couple > > > of > > > > > > cars i have seen with these wheels, have they modified them or > > > just > > > > > > bolted them on? Im running 2 deg caster, 1 deg neg camber, > 340mm > > > at > > > > > > the front, 240k struts. If the cleareances are fine, i would > > > assume > > > > > > steering effort would be increased. > > > > > > > > > > > > any help would be great > > > > > > > > > > > > Chris (damb its hard finding wheel for a 30 year old datto) > > King. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
