I've dusted off theturntable, etc. since we moved recently. I also want to RIP a bunch of shelac and some vinyl. I have a Sony TA-1150 amp that I bought used in the '80s. The switched and linear pots were noisy until I moved it 50 miles in the back of the van - now it works great! The turntable is an old Dual 1209 that needs the on/off switch that activates when the arm lifts either cleaned or hot-wired. I have the 78rpm needle for it - don't remember the cartridge now, an a "TC778" equalizer to feed the Sony when playing the 78s.
We have around 8 shelf feet of 78s that have been in the family since the 1920s, need to get on the project someday! On Sat, Feb 25, 2012 at 6:15 PM, E M <pokieba...@gmail.com> wrote: > Thanks everyone for your input. Some great suggestions, which I will > follow up on! I had a look on eBay and as well my local CL as some > suggested. I also spent a couple of hours today checking out LP on eBay. > Shopping for those old LPs that were loaned out years ago, and for some > reason, never returned, is going to be fun. :-) > > Thanks again everyone! > > Ed > 300E (looked at some Macintosh stuff on their home page, for the car, but > as good as it might be, I think they're a bit too ugly to put in any of the > cars) > > On 25 February 2012 18:19, Rich Thomas < > richthomas79td...@constructivity.net > > wrote: > > > I looked on the Charleston CL, found these recent postings -- there is > > some decent stuff all the time listed: > > > > http://charleston.craigslist.**org/ele/2855939965.html< > http://charleston.craigslist.org/ele/2855939965.html> > > > > http://charleston.craigslist.**org/ele/2834570881.html< > http://charleston.craigslist.org/ele/2834570881.html> > > > > http://charleston.craigslist.**org/ele/2870707950.html< > http://charleston.craigslist.org/ele/2870707950.html> > > > > http://charleston.craigslist.**org/ele/2865771097.html< > http://charleston.craigslist.org/ele/2865771097.html> > > > > http://charleston.craigslist.**org/ele/2864704069.html< > http://charleston.craigslist.org/ele/2864704069.html> > > > > This is a nice machine http://charleston.craigslist.** > > org/ele/2859233805.html< > http://charleston.craigslist.org/ele/2859233805.html> > > > > This guy is some kind of collector/reseller, always posting stuff > > http://charleston.craigslist.**org/ele/2844213425.html< > http://charleston.craigslist.org/ele/2844213425.html> > > > > Lots of choices. Not sure where you are but this stuff is out there all > > over the place. For a bennie you ought to be able to find something > nice. > > > > My buddy at the Habitat ReStore gave me some sort of turntable (a > Technics > > I think, not a very good machine but it would spin a platter), the belt > on > > it was broken and the cart was kinda beat, but you can get belts and > > cartridges pretty cheap. > > > > Do you use Audacity to rip the vinyl? > > > > --R (who has his Pioneer PL-51 sitting right here next to me, was my > > Christmas present in 1973, and goes nicely with my 1973 Pioneer SX-727 > > receiver I bought back then -- the large Advents are downstairs hooked up > > to the TV and still shaking the walls) > > > > > > On 2/25/12 4:38 PM, E M wrote: > > > >> Hey Guys, > >> > >> Off topic, but I know some of you guys are into this stuff. I'm getting > >> back into vinyl over CDs, and MP3. I miss the quality and warmth of old > >> records. Anyway, I have an old mid 80s Sony receiver, and a Sony turn > >> table, that is a front loader (slides out like a CD player). It's > direct > >> drive, but the bed will now not slide out. Not sure if it's just the > >> switch (Sony switch always felt fragile to me), or something more > >> mechanical. > >> > >> Anyway, I was wonder if anyone had any suggestions for a good quality > used > >> turn table? I know Macintosh make good amps, but not really in the > market > >> for an amp at the moment. Just looking for a good quality turn table, > >> that > >> will work with my Sony receiver. Something of good quality that was > made > >> before everything was outsourced to China and Mexico. > >> > >> Thanks in advance. > >> > >> Ed > >> 300E > >> ______________________________**_________ > >> http://www.okiebenz.com > >> For new and used parts go to www.okiebenz.com > >> To search list archives http://www.okiebenz.com/**archive/< > http://www.okiebenz.com/archive/> > >> > >> To Unsubscribe or change delivery options go to: > >> http://mail.okiebenz.com/**mailman/listinfo/mercedes_**okiebenz.com< > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com> > >> > >> > > ______________________________**_________ > > http://www.okiebenz.com > > For new and used parts go to www.okiebenz.com > > To search list archives http://www.okiebenz.com/**archive/< > http://www.okiebenz.com/archive/> > > > > To Unsubscribe or change delivery options go to: > > http://mail.okiebenz.com/**mailman/listinfo/mercedes_**okiebenz.com< > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com> > > > _______________________________________ > http://www.okiebenz.com > For new and used parts go to www.okiebenz.com > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > -- OK Don 2001 ML320 1992 300D 2.5T 1990 300D 2.5T 1997 Plymouth Grand Voyager _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com