Hi,
Are you trying to use the MNI drivers for your card? Are you sure
you're using the correct driver? Have you tried using the SANA-II
driver that came with your card?
Miami and MiamiDX both come from essentially the same code base so it
should work quite easily. Answer the above and then I'll have a think
about it.
Soyeb
> Hello Soyeb
>
> On 21-Jun-01, Soyeb Aswat escribio: s
>
> I would like to use MiamiDx, but there seems to be problem with my hardware.
> Every time I try to run it I get a crash, and have to reboot.
> Miami does not have this problem, it works just fine.
>
> > Well, what you will need is something like IP nat running on the PC to
> > route your traffic and set the amigas gateway address to the IP
> > address of the PC. Considering your other stuff is working already
> > then the that should do it.
>
> > Also you will probably be better off using the amiga as the gateway to
> > the internet as MiamDX is ALOT better than any TCP/IP stack on the PC.
>
> > Regards,
>
> > Soyeb
> Regards
> --
>
> ------------------- / AMIGA the best computer ever / -----------------
> A1200 Blizzard PPC 603/040/64 Mb RAM, Mediator PCI, 4xEIDE. Voodoo3 3000, CD-ROM ,
>LS120, Motorola SufBoard (Cable), BJC6000, Ethernet Realtek
> ------------------------------------------------------------------
> #WB 3.9 w/ Miami, mFTP, V 3.3 , YAM 2, AmTalk, AmIRC 2.0 (All reg)#
> ======================================================================
> /Javier A. Ospina/
> New York, USA
>
> --
>
> To unsubscribe send "unsubscribe miami-talk-ml" to
> "[EMAIL PROTECTED]". For help on list commands send "help" to
> "[EMAIL PROTECTED]".
>
>
--
email: [EMAIL PROTECTED]
www: http://www.soyeb.homeip.net
work: http://www.tertio.com
--
To unsubscribe send "unsubscribe miami-talk-ml" to
"[EMAIL PROTECTED]". For help on list commands send "help" to
"[EMAIL PROTECTED]".
