Tim Seifert wrote:
JAO> All I get is "Program failed" 8000000� every time I try to use MiamiDx
>
> Perhaps you may need to check that your MUI installation is up to date?
> That can be the cause of all manner of problems, many of which don't
> really make a lot of sense. Perhaps, if you start the program with the
> NOGUI tooltype, it might run without loading any MUI files, letting you
> know if the problem is in that direction.
I tried the NOGUI before, it has the same effect
>
>
> How much RAM do you have? Is there plenty available?
>
BlizzardPPC 040/25 (PPC 200) and 64 MB FastRAM
Mediator 1200 PCI, Voodoo 3000, EtherNet 10 Mbit
>
> Has your hard drive been working fine? If you've got something like the
> MaxTransfer value set too high, then largish files can get corrupted.
>
> Have you checked that your tool for unpacking LhA archives is working
> fine?
>
> Temporarily remove any MiamiDx.default file that you might have in the
> Miami: directory, in case some setting is so out of whack it's causing a
> failure.
I removed Miami.default and MiamiDx.default this did not help either.
>
> But it's more likely that your problem is some non-MiamiDx thing, as I've
> not heard of anything that you could do with MiamiDx that would kill it.
>
> TS>> You have downloaded all the files that are needed for MiamiDx?
>
> JAO> I downloded the only two files that are there MiamiDx 1.0c and
> JAO> MiamiDx MUI
>
> That's all you need, until you want to use SSL. Then you either download
> the SSL files that Miami uses, or whatever your web browser uses. Some
> browsers can use their own SSL or external SSL libraries. But for now, I
> wouldn't worry about that.
>
I also installed the MiamiSSL, but this should not affect MiamiDx since the
SSL is used by the browser.
When I reinstall MiamiDx the very first time it runs I get the GUI. Any other
times I try to run the program just gives me the failed mesage.
>
> --
> Bye,
> Tim.
--
To unsubscribe send "unsubscribe miami-talk-ml" to
"[EMAIL PROTECTED]". For help on list commands send "help" to
"[EMAIL PROTECTED]".
