Greetings, I have an nv2 point to point link on 5GHz-A getting this error. The link is good, with -40/-35dBm signal (maybe too hot is the problem). 95%+ CCQ and 54Mbps modulation rates. The units are running 6.22 (RB411L) and 6.23 (RB411) with the latest firmware. Radios are R52 on one side, and R52H on the other.
The link will sometimes drop with "lost connection, medium-access timeout", coming back about 10-20 seconds later. Other than the signal being too hot - I'll turn that down and see what happens - any thoughts as to what might cause the issue? -- ----------------------------------------------- - Nick Bright - - Vice President of Technology - - Valnet -=- We Connect You -=- - - Tel 888-332-1616 x 315 / Fax 620-331-0789 - - Web http://www.valnet.net/ - ----------------------------------------------- - Are your files safe? - - Valnet Vault - Secure Cloud Backup - - More information & 30 day free trial at - - http://www.valnet.net/services/valnet-vault - ----------------------------------------------- This email message and any attachments are intended solely for the use of the addressees hereof. This message and any attachments may contain information that is confidential, privileged and exempt from disclosure under applicable law. If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system. _______________________________________________ Mikrotik-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/mikrotik-users
