The RB411L doesn't have enough umph to keep up and drops the connection? On 12/15/2014 5:10 PM, Nick Bright wrote: > Greetings, > > I have an nv2 point to point link on 5GHz-A getting this error. The link > is good, with -40/-35dBm signal (maybe too hot is the problem). 95%+ CCQ > and 54Mbps modulation rates. The units are running 6.22 (RB411L) and > 6.23 (RB411) with the latest firmware. Radios are R52 on one side, and > R52H on the other. > > The link will sometimes drop with "lost connection, medium-access > timeout", coming back about 10-20 seconds later. > > Other than the signal being too hot - I'll turn that down and see what > happens - any thoughts as to what might cause the issue? >
-- Scott Reed Owner NewWays Networking, LLC Wireless Networking Network Design, Installation and Administration Mikrotik Advanced Certified www.nwwnet.net (765) 855-1060 (765) 439-4253 Toll-free (855) 231-6239 _______________________________________________ Mikrotik-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/mikrotik-users
