On a 54 mbit link? Justin Miller
VA SkyWire, LLC 1707 E Main St Richmond, VA 23223 Office: (804) 521-4212 Desk: (804) 591-0500 ext 101 Fax: (804) 591-1559 [email protected] <mailto:[email protected]> > On Dec 15, 2014, at 6:50 PM, Scott Reed <[email protected]> wrote: > > The RB411L doesn't have enough umph to keep up and drops the connection? > > On 12/15/2014 5:10 PM, Nick Bright wrote: >> Greetings, >> >> I have an nv2 point to point link on 5GHz-A getting this error. The link >> is good, with -40/-35dBm signal (maybe too hot is the problem). 95%+ CCQ >> and 54Mbps modulation rates. The units are running 6.22 (RB411L) and >> 6.23 (RB411) with the latest firmware. Radios are R52 on one side, and >> R52H on the other. >> >> The link will sometimes drop with "lost connection, medium-access >> timeout", coming back about 10-20 seconds later. >> >> Other than the signal being too hot - I'll turn that down and see what >> happens - any thoughts as to what might cause the issue? >> > > -- > Scott Reed > Owner > NewWays Networking, LLC > Wireless Networking > Network Design, Installation and Administration > Mikrotik Advanced Certified > www.nwwnet.net > (765) 855-1060 (765) 439-4253 Toll-free (855) 231-6239 > > > _______________________________________________ > Mikrotik-users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/mikrotik-users
_______________________________________________ Mikrotik-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/mikrotik-users
