Make both the same routeros version… That’s the first thing.

I would say they are hot as well. 

Justin Miller

 VA SkyWire, LLC
 1707 E Main St
 Richmond, VA 23223
 Office: (804) 521-4212
 Desk: (804) 591-0500 ext 101
 Fax: (804) 591-1559
 [email protected] <mailto:[email protected]>
> On Dec 15, 2014, at 5:10 PM, Nick Bright <[email protected]> wrote:
> 
> Greetings,
> 
> I have an nv2 point to point link on 5GHz-A getting this error. The link 
> is good, with -40/-35dBm signal (maybe too hot is the problem). 95%+ CCQ 
> and 54Mbps modulation rates. The units are running 6.22 (RB411L) and 
> 6.23 (RB411) with the latest firmware. Radios are R52 on one side, and 
> R52H on the other.
> 
> The link will sometimes drop with "lost connection, medium-access 
> timeout", coming back about 10-20 seconds later.
> 
> Other than the signal being too hot - I'll turn that down and see what 
> happens - any thoughts as to what might cause the issue?
> 
> -- 
> -----------------------------------------------
> -  Nick Bright                                -
> -  Vice President of Technology               -
> -  Valnet -=- We Connect You -=-              -
> -  Tel 888-332-1616 x 315 / Fax 620-331-0789  -
> -  Web http://www.valnet.net/                 -
> -----------------------------------------------
> - Are your files safe?                        -
> - Valnet Vault - Secure Cloud Backup          -
> - More information & 30 day free trial at     -
> - http://www.valnet.net/services/valnet-vault -
> -----------------------------------------------
> 
> This email message and any attachments are intended solely for the use of the 
> addressees hereof. This message and any attachments may contain information 
> that is confidential, privileged and exempt from disclosure under applicable 
> law. If you are not the intended recipient of this message, you are 
> prohibited from reading, disclosing, reproducing, distributing, disseminating 
> or otherwise using this transmission. If you have received this message in 
> error, please promptly notify the sender by reply E-mail and immediately 
> delete this message from your system.
> 
> _______________________________________________
> Mikrotik-users mailing list
> [email protected]
> http://lists.wispa.org/mailman/listinfo/mikrotik-users

_______________________________________________
Mikrotik-users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/mikrotik-users

Reply via email to