I'm trying to compile a GENERIC.MP kernel on amd64
6.4 -stable. I've followed the instructions in the
FAQ for building a custom kernel, but the 'make'
step fails with an unknown argument: '-msave-args'
error. I've copied the compiler messages and dmesg
below. Suggestions for a cure or workaround would
be appreciated.=20
John
cat /usr/src/sys/arch/amd64/amd64/genassym.cf /usr/src/sys/arch/amd64/amd64=
/genassym.cf | sh /usr/src/sys/kern/genassym.sh cc -no-integrated-as -g -W=
error -Wall -Wimplicit-function-declaration -Wno-uninitialized -Wno-pointe=
r-sign -Wframe-larger-than=3D2047 -Wno-address-of-packed-member -Wno-const=
ant-conversion -mcmodel=3Dkernel -mno-red-zone -mno-sse2 -mno-sse -mno-3dno=
w -mno-mmx -msoft-float -fno-omit-frame-pointer -ffreestanding -fno-pie -m=
save-args -O2 -pipe -nostdinc -I/usr/src/sys -I/sys/arch/amd64/compile/GENE=
RIC.MP/obj -I/usr/src/sys/arch -DDDB -DDIAGNOSTIC -DKTRACE -DACCOUNTING -DK=
MEMSTATS -DPTRACE -DPOOL_DEBUG -DCRYPTO -DSYSVMSG -DSYSVSEM -DSYSVSHM -DUVM=
_SWAP_ENCRYPT -DFFS -DFFS2 -DFFS_SOFTUPDATES -DUFS_DIRHASH -DQUOTA -DEXT2FS=
-DMFS -DNFSCLIENT -DNFSSERVER -DCD9660 -DUDF -DMSDOSFS -DFIFO -DFUSE -DSOC=
KET_SPLICE -DTCP_ECN -DTCP_SIGNATURE -DINET6 -DIPSEC -DPPP_BSDCOMP -DPPP_DE=
FLATE -DPIPEX -DMROUTING -DMPLS -DBOOT_CONFIG -DUSER_PCICONF -DAPERTURE -DM=
TRR -DNTFS -DHIBERNATE -DPCIVERBOSE -DUSBVERBOSE -DWSDISPLAY_COMPAT_USL -DW=
SDISPLAY_COMPAT_RAWKBD -DWSDISPLAY_DEFAULTSCREENS=3D"6" -DX86EMU -DONEWIREV=
ERBOSE -DMULTIPROCESSOR -DMAXUSERS=3D80 -D_KERNEL -MD -MP -MF assym.P > ass=
ym.h.tmp
cc: error: unknown argument: '-msave-args'
*** Error 1 in /sys/arch/amd64/compile/GENERIC.MP (Makefile:1010 'assym.h')
dmesg
_____
OpenBSD 6.4 (GENERIC.MP) #6: Sat Jan 26 20:37:44 CET 2019
r...@syspatch-64-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENE=
RIC.MP
real mem =3D 4007526400 (3821MB)
avail mem =3D 3876790272 (3697MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (57 entries)
bios0: vendor Award Software International, Inc. version "F5" date 06/18/20=
08
bios0: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP SSDT HPET MCFG APIC
acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3)=
USB6(S3) SBAZ(S4) P2P_(S5) PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PC=
E7(S4) PCE9(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) Dual Core Processor 4850e, 2505.72 MHz, 0f-6b-02
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE=
36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,RDTSCP,LONG,3DNOW2=
,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/l=
ine 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) Dual Core Processor 4850e, 2505.33 MHz, 0f-6b-02
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE=
36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,RDTSCP,LONG,3DNOW2=
,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/l=
ine 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins, remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P2P_)
acpiprt2 at acpi0: bus -1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE4)
acpiprt5 at acpi0: bus -1 (PCE5)
acpiprt6 at acpi0: bus -1 (PCE6)
acpiprt7 at acpi0: bus -1 (PCE7)
acpiprt8 at acpi0: bus -1 (PCE9)
acpiprt9 at acpi0: bus 2 (PCEA)
acpiprt10 at acpi0: bus -1 (PCEB)
acpiprt11 at acpi0: bus -1 (PCEC)
acpiprt12 at acpi0: bus 1 (AGP_)
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpibtn0 at acpi0: PWRB
acpicmos0 at acpi0
"PNP0C14" at acpi0 not configured
cpu0: PowerNow! K8 2505 MHz: speeds: 2500 2400 2200 2000 1800 1000 MHz
pci0 at mainbus0 bus 0
0:0:0: mem address conflict 0xe0000000/0x20000000
pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Radeon HD 3200" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 18
azalia0 at pci1 dev 5 function 1 "ATI RS780 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ppb1 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C (0x3c0=
0), msi, address 00:1f:d0:86:00:60
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int 22, A=
HCI 1.1
ahci0: port 0: 3.0Gb/s
ahci0: port 2: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HDP72503, GM3O> SCSI3 0/direct =
fixed naa.5000cca34ddd54e3
sd0: 305244MB, 512 bytes/sector, 625140335 sectors
sd1 at scsibus1 targ 2 lun 0: <ATA, Hitachi HDP72503, GM3O> SCSI3 0/direct =
fixed naa.5000cca34ddd0950
sd1: 305244MB, 512 bytes/sector, 625140335 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 16, ve=
rsion 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 16, ve=
rsion 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00=
addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, ve=
rsion 1.0, legacy support
ohci2: SMM does not respond, will reset
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 18, ve=
rsion 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00=
addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3a: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL6
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL6
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 =
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 1 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <ATAPI, iHAS124 C, LL0E> ATAPI 5/cdrom remova=
ble
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 3
envy0 at pci3 dev 7 function 0 "IC Ensemble Envy24 I/O Ctrlr" rev 0x02: api=
c 2 int 21
envy0: M-Audio Audiophile 2496, 2 inputs, 2 outputs
audio0 at envy0
midi0 at envy0: <Envy24 MIDI UART>
"TI TSB43AB23 FireWire" rev 0x00 at pci3 dev 14 function 0 not configured
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18, ve=
rsion 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev=
BH-G2
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00=
addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00=
addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00=
addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00=
addr 1
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8718F rev 5, EC port 0x228
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00=
addr 1
vmm0 at mainbus0: SVM
ugen0 at uhub3 port 1 "Ultima USB Scanner" rev 1.10/1.00 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (d62a14d69a338a1c.a) swap on sd0b dump on sd0b
initializing kernel modesetting (RS780 0x1002:0x9610 0x1458:0xD000).
radeondrm0: 1440x900, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ulpt0 at uhub0 port 3 configuration 1 interface 0 "Brother HL-5250DN" rev 2=
=2E00/1.00 addr 2
ulpt0: using bi-directional mode
