And since you are doing this with -current *ALL OVER THE PLACE* there are instructions that if you have trouble you should upgrade to a snapshot.
Those instructions to exist the noise on the list everytime we make a change and people don't notice or understand it and suddenly they are in over their heads *even our own developers* have to do that, from time to time > John Rigg <o...@jrigg.co.uk> wrote: > > > I'm trying to compile a GENERIC.MP kernel on amd64 > > 6.4 -stable. > > No way, you are not. Only -current has that, as of a few days ago. > > I've followed the instructions in the > > FAQ for building a custom kernel, but the 'make' > > step fails with an unknown argument: '-msave-args' > > error. I've copied the compiler messages and dmesg > > below. Suggestions for a cure or workaround would > > be appreciated.=20 > > > > John > > > > > > cat /usr/src/sys/arch/amd64/amd64/genassym.cf /usr/src/sys/arch/amd64/amd64= > > /genassym.cf | sh /usr/src/sys/kern/genassym.sh cc -no-integrated-as -g -W= > > error -Wall -Wimplicit-function-declaration -Wno-uninitialized -Wno-pointe= > > r-sign -Wframe-larger-than=3D2047 -Wno-address-of-packed-member -Wno-const= > > ant-conversion -mcmodel=3Dkernel -mno-red-zone -mno-sse2 -mno-sse -mno-3dno= > > w -mno-mmx -msoft-float -fno-omit-frame-pointer -ffreestanding -fno-pie -m= > > save-args -O2 -pipe -nostdinc -I/usr/src/sys -I/sys/arch/amd64/compile/GENE= > > RIC.MP/obj -I/usr/src/sys/arch -DDDB -DDIAGNOSTIC -DKTRACE -DACCOUNTING -DK= > > MEMSTATS -DPTRACE -DPOOL_DEBUG -DCRYPTO -DSYSVMSG -DSYSVSEM -DSYSVSHM -DUVM= > > _SWAP_ENCRYPT -DFFS -DFFS2 -DFFS_SOFTUPDATES -DUFS_DIRHASH -DQUOTA -DEXT2FS= > > -DMFS -DNFSCLIENT -DNFSSERVER -DCD9660 -DUDF -DMSDOSFS -DFIFO -DFUSE -DSOC= > > KET_SPLICE -DTCP_ECN -DTCP_SIGNATURE -DINET6 -DIPSEC -DPPP_BSDCOMP -DPPP_DE= > > FLATE -DPIPEX -DMROUTING -DMPLS -DBOOT_CONFIG -DUSER_PCICONF -DAPERTURE -DM= > > TRR -DNTFS -DHIBERNATE -DPCIVERBOSE -DUSBVERBOSE -DWSDISPLAY_COMPAT_USL -DW= > > SDISPLAY_COMPAT_RAWKBD -DWSDISPLAY_DEFAULTSCREENS=3D"6" -DX86EMU -DONEWIREV= > > ERBOSE -DMULTIPROCESSOR -DMAXUSERS=3D80 -D_KERNEL -MD -MP -MF assym.P > ass= > > ym.h.tmp > > cc: error: unknown argument: '-msave-args' > > *** Error 1 in /sys/arch/amd64/compile/GENERIC.MP (Makefile:1010 'assym.h') > > > > > > dmesg > > _____ > > > > OpenBSD 6.4 (GENERIC.MP) #6: Sat Jan 26 20:37:44 CET 2019 > > r...@syspatch-64-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENE= > > RIC.MP > > real mem =3D 4007526400 (3821MB) > > avail mem =3D 3876790272 (3697MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (57 entries) > > bios0: vendor Award Software International, Inc. version "F5" date 06/18/20= > > 08 > > bios0: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H > > acpi0 at bios0: rev 0 > > acpi0: sleep states S0 S1 S4 S5 > > acpi0: tables DSDT FACP SSDT HPET MCFG APIC > > acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3)= > > USB6(S3) SBAZ(S4) P2P_(S5) PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PC= > > E7(S4) PCE9(S4) [...] > > acpitimer0 at acpi0: 3579545 Hz, 32 bits > > acpihpet0 at acpi0: 14318180 Hz > > acpimcfg0 at acpi0 > > acpimcfg0: addr 0xe0000000, bus 0-255 > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: AMD Athlon(tm) Dual Core Processor 4850e, 2505.72 MHz, 0f-6b-02 > > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE= > > 36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,RDTSCP,LONG,3DNOW2= > > ,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP > > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/l= > > ine 16-way L2 cache > > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > > cpu0: apic clock running at 200MHz > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: AMD Athlon(tm) Dual Core Processor 4850e, 2505.33 MHz, 0f-6b-02 > > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE= > > 36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,RDTSCP,LONG,3DNOW2= > > ,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP > > cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/l= > > ine 16-way L2 cache > > cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > > cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins, remapped > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 3 (P2P_) > > acpiprt2 at acpi0: bus -1 (PCE2) > > acpiprt3 at acpi0: bus -1 (PCE3) > > acpiprt4 at acpi0: bus -1 (PCE4) > > acpiprt5 at acpi0: bus -1 (PCE5) > > acpiprt6 at acpi0: bus -1 (PCE6) > > acpiprt7 at acpi0: bus -1 (PCE7) > > acpiprt8 at acpi0: bus -1 (PCE9) > > acpiprt9 at acpi0: bus 2 (PCEA) > > acpiprt10 at acpi0: bus -1 (PCEB) > > acpiprt11 at acpi0: bus -1 (PCEC) > > acpiprt12 at acpi0: bus 1 (AGP_) > > acpicpu0 at acpi0: C1(@1 halt!), PSS > > acpicpu1 at acpi0: C1(@1 halt!), PSS > > acpibtn0 at acpi0: PWRB > > acpicmos0 at acpi0 > > "PNP0C14" at acpi0 not configured > > cpu0: PowerNow! K8 2505 MHz: speeds: 2500 2400 2200 2000 1800 1000 MHz > > pci0 at mainbus0 bus 0 > > 0:0:0: mem address conflict 0xe0000000/0x20000000 > > pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00 > > ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00 > > pci1 at ppb0 bus 1 > > radeondrm0 at pci1 dev 5 function 0 "ATI Radeon HD 3200" rev 0x00 > > drm0 at radeondrm0 > > radeondrm0: apic 2 int 18 > > azalia0 at pci1 dev 5 function 1 "ATI RS780 HD Audio" rev 0x00: msi > > azalia0: no supported codecs > > ppb1 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: msi > > pci2 at ppb1 bus 2 > > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C (0x3c0= > > 0), msi, address 00:1f:d0:86:00:60 > > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2 > > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int 22, A= > > HCI 1.1 > > ahci0: port 0: 3.0Gb/s > > ahci0: port 2: 3.0Gb/s > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HDP72503, GM3O> SCSI3 0/direct = > > fixed naa.5000cca34ddd54e3 > > sd0: 305244MB, 512 bytes/sector, 625140335 sectors > > sd1 at scsibus1 targ 2 lun 0: <ATA, Hitachi HDP72503, GM3O> SCSI3 0/direct = > > fixed naa.5000cca34ddd0950 > > sd1: 305244MB, 512 bytes/sector, 625140335 sectors > > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 16, ve= > > rsion 1.0, legacy support > > ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 16, ve= > > rsion 1.0, legacy support > > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00= > > addr 1 > > ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, ve= > > rsion 1.0, legacy support > > ohci2: SMM does not respond, will reset > > ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 18, ve= > > rsion 1.0, legacy support > > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 19 > > usb1 at ehci1: USB revision 2.0 > > uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00= > > addr 1 > > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3a: SMI > > iic0 at piixpm0 > > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 > > spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5 > > spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL6 > > spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL6 > > pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 = > > configured to compatibility, channel 1 configured to compatibility > > atapiscsi0 at pciide0 channel 1 drive 0 > > scsibus2 at atapiscsi0: 2 targets > > cd0 at scsibus2 targ 0 lun 0: <ATAPI, iHAS124 C, LL0E> ATAPI 5/cdrom remova= > > ble > > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 > > pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00 > > ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00 > > pci3 at ppb2 bus 3 > > envy0 at pci3 dev 7 function 0 "IC Ensemble Envy24 I/O Ctrlr" rev 0x02: api= > > c 2 int 21 > > envy0: M-Audio Audiophile 2496, 2 inputs, 2 outputs > > audio0 at envy0 > > midi0 at envy0: <Envy24 MIDI UART> > > "TI TSB43AB23 FireWire" rev 0x00 at pci3 dev 14 function 0 not configured > > ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18, ve= > > rsion 1.0, legacy support > > pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00 > > pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00 > > pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00 > > kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev= > > BH-G2 > > usb2 at ohci0: USB revision 1.0 > > uhub2 at usb2 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00= > > addr 1 > > usb3 at ohci1: USB revision 1.0 > > uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00= > > addr 1 > > usb4 at ohci2: USB revision 1.0 > > uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00= > > addr 1 > > usb5 at ohci3: USB revision 1.0 > > uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00= > > addr 1 > > isa0 at pcib0 > > isadma0 at isa0 > > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > lpt0 at isa0 port 0x378/4 irq 7 > > it0 at isa0 port 0x2e/2: IT8718F rev 5, EC port 0x228 > > usb6 at ohci4: USB revision 1.0 > > uhub6 at usb6 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00= > > addr 1 > > vmm0 at mainbus0: SVM > > ugen0 at uhub3 port 1 "Ultima USB Scanner" rev 1.10/1.00 addr 2 > > vscsi0 at root > > scsibus3 at vscsi0: 256 targets > > softraid0 at root > > scsibus4 at softraid0: 256 targets > > root on sd0a (d62a14d69a338a1c.a) swap on sd0b dump on sd0b > > initializing kernel modesetting (RS780 0x1002:0x9610 0x1458:0xD000). > > radeondrm0: 1440x900, 32bpp > > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > ulpt0 at uhub0 port 3 configuration 1 interface 0 "Brother HL-5250DN" rev 2= > > =2E00/1.00 addr 2 > > ulpt0: using bi-directional mode > > >
