Bentley says new 9A engine 145-189psiAnyway it looks like Holland gets the
cigar or whatever they're smoking these days in CA. The intake cam sprocket was
off. It still looks a little off but less than before. Could I post or email
someone a photo of the way I have it? Just to be sure....By the way the
DPR values on my spare airbox were +-19mA.Thanks again,Steve----- Original
Message -----From: [email protected]: Wednesday, October 25, 2006 9:46
amSubject: Re: [a2-16v-list] No power/low end on new 2.0To:
[email protected] me if I am wrong (probably am), but if
ambient air pressureis 14.7psi, then in a normally aspirated motor, at, say,
10:1 C/R,wouldnt that be a (dry) compression level of 147psi? 10.5:1 @14.7psi
would be 154psi, no? Thanks,Rick -------- Original Message --------Subject:
Re:[a2-16v-list] No power/low end on new 2.0From:
DocWyte<[email protected]>Date: Wed, October 25, 2006 9:08amTo:
[email protected],
ProFormance<[email protected]>Cc:[email protected] you're at
sea level, compressionof 125 is very,very low. It should be 190+, preferably
over200.
