Tom: I like your idea too. email a picture? --Gary On Wednesday, February 4, 2004, at 08:54 AM, Smith, Tom wrote:
Peter, I use a real low tech tiller lock on my M15. Uses a jam cleat on the bottom of the tiller to capture a line connected to two bungee loops that connect to the stern cleats on either side. Works real well. Email me off line if you want to know more. t
Tom Smith & Jane Van Winkle Sandpoint, Idaho M15-345, Chukar M17-064, Unnamed
-----Original Message----- From: Peter Deffenbacher [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 03, 2004 11:25 PM To: [EMAIL PROTECTED] Subject: M_Boats: M15 Jib, Main and Tiller Lock
Thank you,
Tom S, Steve R, Bill R, Randy G.
I think that on my boat I will start with the tiller lock because I have
been there with a 20 MPH wind blowing and trying to set the sails with
the tiller loose! The rudder will go the wrong way! I am thinking that
a Tiller Lock from WM would be the best to start with. Does anyone have
any more advice?
Thanks in advance,
Peter D
Peanut M15
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
This message was scanned for viruses!!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
