Is the CLUSRCVR on MQFULL1 defined correctly? The connname parameter is that of MQFULL1's server, including the port#?
You wrote: 1- MQCHIN job indicates that : Unable to get > message > from > SYSTEM.CLUSTER.COMMAND.QUEUE, MQCC=2 > MQRC=2016System.cluster.repository.queue on MQ2T > 2016 . Recycling qmgr did not help. Did you manually GET enable these queues and restart the QM (the only way to restart the repository manager)? If you are still stuck, please post the output of this command from all the QMs in question: dis CLUSQMGR(*) all -----Original Message----- From: Ruzi R [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 10, 2003 10:55 AM To: [EMAIL PROTECTED] Subject: Re: URGENT HELP NEEDED: on cluster resolution I went ahead and: 1-Suspended the qmgr MQFULL1 2-Deleted the clussdr on MQFULL1 (TO.MQFULL2). 3-Recreated the clussdr on MQFULL1 (TO.MQFULL2) 4-Resumed qmgr 5-Refreshed cluster 6-Display clusqmgr(*) showed only the MQFULL1 qmgr (neither the second full rep MQFULL2 or the rest of the cluster members) I hope someone can help me with this. Thanks, Ruzi --- Ruzi R <[EMAIL PROTECTED]> wrote: > Hi all, > > We are on MQ 5.3 CSD 05 ON W2K servers and OS/390 MQ > 5.3. Last night, we replaced the 2 full > repositories > (on W2K machineA and machineB) of our two MQ > clusters with the new full repositories (on W2K also > machine1 and machine2). I had followed the steps > stated in the cluster book to the dot (I believe) on > how to do this task. One of the clusters is working > without any problems. We have been having problems > with the other cluster since this switch over. I > get > RC 2189 (I know what this means) when I put a > message > across the cluster. MQ explorer cluster (namely > MQ2T.CLUSTER) only shows the MQFULL1 repository. > > So the set up is: > > MQFULL1 on machine1 --- > full rep > MQFULL2 on machine 2 --- > full rep > > MQ2T on OS/390----- cluster member (not fill rep) > MQ1 on w2k ----- cluster member (not full rep) > > > 1- MQCHIN job indicates that : Unable to get > message > from > SYSTEM.CLUSTER.COMMAND.QUEUE, MQCC=2 > MQRC=2016System.cluster.repository.queue on MQ2T > 2016 . Recycling qmgr did not help. > 2- When I DISPLAY CLUSQMGR(*) in MQFULL2 it displays > all the cluster info correctly (i.e. MQFULL1, > MQFULL2, > MQ2T, MQ1). However the same command issued on > MQFULL > shows: > > DISPLAY CLUSQMGR(*) > 1 : DISPLAY CLUSQMGR(*) > AMQ8441: Display Cluster Queue Manager details. > CLUSQMGR(MQFULL1) > CLUSTER(MQ2T.CLUSTER) > CHANNEL(TO.MQFULL1) > AMQ8441: Display Cluster Queue Manager details. > CLUSQMGR(SYSTEM.TEMPQMGR.machine2(1414)) > CLUSTER(MQ2T.CLUSTER) > CHANNEL(TO.MQFULL2) > > Looks like the full repositories are not connected > to > each other properly. > SYSTEM.TEMPQMGR.machine2(1414)) is supposed to > say > MQFULL2 instead. How can I correct this? Why is > it > not showing the rest of the cluster members ? Should > I > delete the clussdr/clusrcvr chnnels on MQFULL1 to > MQFULL2 and redefine them? How would it impact the > rest of the cluster? > > I would very much appreciate your help with this > problem. > > Best regards, > > Ruzi > Instructions for managing your mailing list subscription are provided in the Listserv General Users Guide available at http://www.lsoft.com Archive: http://vm.akh-wien.ac.at/MQSeries.archive This communication, including attachments, is for the exclusive use of addressee and may contain proprietary, confidential or privileged information. If you are not the intended recipient, any use, copying, disclosure, dissemination or distribution is strictly prohibited. If you are not the intended recipient, please notify the sender immediately by return email and delete this communication and destroy all copies. Instructions for managing your mailing list subscription are provided in the Listserv General Users Guide available at http://www.lsoft.com Archive: http://vm.akh-wien.ac.at/MQSeries.archive
