Forget it Maico, I tried everything. I have 2 complete machines running
(tubo-R with novaxis, 8250 2+ with MK, both with a ZIPdrive) Doesn't work!
And ZIP-disk-jockeying is not a problem. Both MSX have harddisk as
bootpartition
------------------------------------------------------------------------
------------
Greetings and till mail!
Hans-Peter Zeedijk, [EMAIL PROTECTED]
MSX en anders niks! (op die P2 na dan!)
------------------------------------------------------------------------
------------
-----Oorspronkelijk bericht-----
Van: Maico Arts [SMTP:[EMAIL PROTECTED]]
Verzonden: zaterdag 4 juli 1998 8:05
Aan: [EMAIL PROTECTED]
Onderwerp: Re: ZIP on MSX
>At 23:02 03/07/98 +0200, you wrote:
>>Grauw, you didn't read: I wrote about the INTERNAL SCSI
ZIP! That one has
>>jumpers for all SCSI ID's and termination.
>>You are right about zip together with HD, because if you
only use ZIP, you
>>have to reboot when you want to change ZIP's. I have (in a
8250) a Seagate
>
> Another good thing about Mega-SCSI is that you don't need
to reboot your
>MSX when you change the Zip disk. Just exchange it, even if
it's the only
>SCSI device.
On megascsi I think all your partitions are the same size
(except maybe for the last one), and all start at the same
point. This would mean when you change disks you always get
the same partitiontable.
You have to take care ofcourse that you have command.com on
the first partition.
This is also possible on gouda/novaxis! I tryed this several
years ago whit my Syquest drive (105 MB removable harddisk)
but then again, if you have to copy a lot from one zip to an
other, you have to use the ramdisk, since it cannot see
which zipdisk is inserted...
greetings
Maico Arts
MSX-NBNO
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and
put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailing
list/)
****
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
