-----Oorspronkelijk bericht-----
Van: J.P. Zeedijk <[EMAIL PROTECTED]>
Aan: '[EMAIL PROTECTED]' <[EMAIL PROTECTED]>
Datum: vrijdag 3 juli 1998 23:23
Onderwerp: ZIP on MSX
>Grauw, you didn't read: I wrote about the INTERNAL SCSI
ZIP! That one has
>jumpers for all SCSI ID's and termination.
>You are right about zip together with HD, because if you
only use ZIP, you
>have to reboot when you want to change ZIP's. I have (in a
8250) a Seagate
>20Mb on SCSI-ID 0, so booting and all major utillities are
on that disk and
>all other stuff is on the ZIP's (I use 3 disks till now) I
have on this MSX
>(8250 2+) Internal SCSI ZIP next to the HD. On the Turbo-R
I have an IBM
>200Mb harddisk as bootdisk and for extra capacity an
external SCSI ZIP on
>ID 5. But a pitty is that the disks made on Turbo-R with
Novaxis-Gouda are
>not exchangeable with the 8250's MK SCSI disks and
vise-versa. I am still
>looking for a tool for this problem, because I want to
transfer a lot of
>data (about 100Mb) to the Turbo-R.
No partitions can be read by the other interface?
BTW: I think I have seen a utility to convert partition
tabto gouda-novaxis and vice versa. I think this is the Bert
interface. The Bert and MK should be almost the same!
Greetings
Maico Arts
MSX-NBNO
>
>-----------------------------------------------------------
-------------
>------------
>Greetings and till mail!
>Hans-Peter Zeedijk, [EMAIL PROTECTED]
>MSX en anders niks! (op die P2 na dan!)
>-----------------------------------------------------------
-------------
>------------
>
>-----Oorspronkelijk bericht-----
>Van: Grauw's emailserver [SMTP:[EMAIL PROTECTED]]
>Verzonden: woensdag 1 juli 1998 14:41
>Aan: [EMAIL PROTECTED]
>Onderwerp: Re: HD + ZIPplus = dead HD !!
>
>
>-----Oorspronkelijk bericht-----
>Van: J.P. Zeedijk <[EMAIL PROTECTED]>
>
>
>...blablabla...
>:I have heard from a supplier that IOMEGA is stopping with
the internal
>:SCSI-model! So, no more drives to be used on MSX! It was
the only model
>:that had SCSI ID 0 to 6!
>
>I guess the external SCSI-model couldn't handle SCSI ID
0???
>No prob for the Bert-interface. If you've got a HD hangin'
on ID 0 for
>booting, you can use all other ID's. You just can't boot
from the
>ZIP-drive.
>But hey! Who's got a SCSI-interface but doesn't have a
HD???
>
>
>~Grauw
>
>
>****
>MSX Mailinglist. To unsubscribe, send an email to
[EMAIL PROTECTED] and
>put
>in the body (not subject) "unsubscribe msx
[EMAIL PROTECTED]" (without the
>quotes :-) Problems? contact [EMAIL PROTECTED]
>(www.stack.nl/~wiebe/mailinglist/)
>****
>****
>MSX Mailinglist. To unsubscribe, send an email to
[EMAIL PROTECTED] and put
>in the body (not subject) "unsubscribe msx
[EMAIL PROTECTED]" (without the
>quotes :-) Problems? contact [EMAIL PROTECTED]
(www.stack.nl/~wiebe/mailinglist/)
>****
>
>
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
