On Wednesday 01 October 2003 03:10 pm, Margot wrote:
yankl wrote:
I assume you have run lspci or lspcidrak and see just one device in it. If you see tow then you still need to go to BIOS and play with settings before you can reinstall your system.
Yankl,
I'd never heard of lspci or lspcidrak until you just mentioned them - here are the results:
[EMAIL PROTECTED] margot]$ lspci 00:00.0 Host bridge: VIA Technologies, Inc. P4M266 Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] 00:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04) 00:0b.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 01) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 1b) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 30) 01:00.0 VGA compatible controller: S3 Inc. VT8751 [ProSavageDDR P4M266] VGA Controller [EMAIL PROTECTED] margot]$
[EMAIL PROTECTED] margot]$ lspcidrak bash: lspcidrak: command not found [EMAIL PROTECTED] margot]$
(Tried it as root as well, but still got "command not found")
I had another look in BIOS and can't find any other settings to play with that obviously relate to sound. There are some I'm not sure about though, because I don't fully understand what they are:
Under PCI Plug and Play Setup - Plug and Play Aware O/S - should this be Yes or No?
Also, options to change all settings to "Optimal" or "Best Performance" - I opted not to on both these, because it didn't say what it was going to do!
Margot
lspcidrake. I have a problem some time remember the commands name endings because I use tab too much. From what I remember lspci outputs the /proc/bus/pci/devices. It is shown two cards on your mother board; are you sure that you do not have two cards one on board and one in the pci slot?
If you 200% sure that you have one sound card and have not install any new hardware in lets do #lspcidrake -v -f and post it. We are interesting in vendor and device number. I am guessing some other hardware reports it self as audio controller.
I get very confused about when should be drak and when should be drake!
[EMAIL PROTECTED] margot]$ lspcidrake -v -f
unknown : VIA Technologies Inc|CPU-to-PCI Bridge [BRIDGE_HOST] (vendor:1106 device:3148 subv:1106 subd:0000)
unknown : VIA Technologies|VT8633 [Apollo Pro266 AGP] [BRIDGE_PCI] (vendor:1106 device:b091)
snd-emu10k1 : Creative Labs|SB Live! (audio) [MULTIMEDIA_AUDIO] (vendor:1102 device:0002 subv:1102 subd:0020)
emu10k1-gp : Creative Labs|SB Live! (joystick) [INPUT_OTHER] (vendor:1102 device:7002 subv:1102 subd:0020)
unknown : VIA Technologies|VT8233 PCI to ISA Bridge [BRIDGE_ISA] (vendor:1106 device:3074 subv:1106 subd:0000)
unknown : VIA Technologies|VT82C586 IDE [Apollo] [STORAGE_IDE] (vendor:1106 device:0571)
usb-uhci : VIA Technologies|VT82C586B USB [SERIAL_USB] (vendor:1106 device:3038 subv:0925 subd:1234)
snd-via8233 : VIA Technologies|VT8233 [AC97 Audio Controller] [MULTIMEDIA_AUDIO] (vendor:1106 device:3059 subv:1297 subd:0142)
unknown : S3 Inc.|VT8751 [ProSavageDDR P4M266] VGA Controller [DISPLAY_VGA] (vendor:5333 device:8d04)
unknown : Virtual|Hub [] (vendor:0000 device:0000)
unknown : Epson Corp.|USB Printer [Printer|Printer|Bidirectional] (vendor:04b8 device:0005)
[EMAIL PROTECTED] margot]$
I am 300% sure that I have never installed any hardware - wouldn't know where to start - and the invoice from the vendor only mentions AC97 on-board sound, there is no mention of (and no charge for!) any sound card.
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
