-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Vogel, Andrew (VOGELAP)
Sent: Tuesday, March 19, 2002 9:28 AM
To: '[EMAIL PROTECTED]'; Myers, Dennis R NWO
Subject: RE: [newbie] ATAPI ZIP drive not working under LM8.1
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Vogel, Andrew (VOGELAP)
Sent: Tuesday, March 19, 2002 9:28 AM
To: '[EMAIL PROTECTED]'; Myers, Dennis R NWO
Subject: RE: [newbie] ATAPI ZIP drive not working under LM8.1
Here
is my /etc/mtab... I've got no experience with it, so I'm attaching the whole
file...
/dev/hda1 / ext2 rw 0 0
none /proc proc rw 0 0
devfs /dev devfs rw 0 0
none /dev/pts devpts rw,mode=0620 0 0
none /dev/shm tmpfs rw 0 0
/dev/hda6 /home ext2 rw 0 0
/dev/hdb1 /var ext2 rw 0 0
/proc/bus/usb /proc/bus/usb usbdevfs rw,devmode=0664,devgid=43 0 0
automount(pid1179) /misc autofs rw,fd=8,pgrp=1179,minproto=2,maxproto=4 0 0
automount(pid1207) /net autofs rw,fd=8,pgrp=1207,minproto=2,maxproto=4 0 0
[Myers, Dennis R NWO]
Ok, the problem I see is that there is no entry
in mtab for the hdd device. Mtab is mounttable. Again I am not at
home, and using a M$ computer so I can't give you the entry, but if someone on
the list will jump in here and provide a line. I think that you need to add an
entry in lilo append line also. Have you tried going to harddrake and seeing if
the zip shows up there, if so, is the configuration bar active at
the bottom of the screen. If it is can you do a configuration
from there? I will check the entry for mtab and a zip device when
I can get to my home office computer, assuming we don't have some help from
the list by then. HTH
Dennis
M.