I did a quick search of their documentation. It appears they support uploads via web interface, Samba, and ftp / sftp. I'd recommend sftp even if the content will be public. The ftp protocols are very likely the most fault tolerant option. Also command line access gives you options for automation if desired.
Paul On Thu, Jan 27, 2022 at 1:09 AM Michael L <helpwithmath...@gmail.com> wrote: > I tried uploading to https://8.39.99.30 ; it's about the same. > > It's a drag and drop web interface. When it interrupts, I have to reload > the web page and drag/drop again for it to continue. I would very much > like to do it via command line and auto retry which I suppose should work > since we have the IP address (I had to get it from nslookup). > > I tried the command line ftp, but that will probably not work without ftp > access being set up on their end, which I will ask for. > > On Wed, Jan 26, 2022 at 3:28 PM Paul Boniol <paul.bon...@gmail.com> wrote: > >> What command/program are you using to send the files? It may be possible >> to set a parameter to automatically rerty. >> >> On Wed, Jan 26, 2022, 8:50 AM Michael L <helpwithmath...@gmail.com> >> wrote: >> >>> AS ALWAYS, THANK YOU ALL FOR THE EXCELLENT INFO. >>> I did upload a lot from our 10Mbps Comcast Business connection in the >>> past, generally slow and historically Comcast has been a disastrous >>> connection. >>> I should say that about July 2020 when I first uploaded to Telvue on my >>> newly installed AT&T Fiber connection, I could upload extremely quickly, >>> comparable to both Charter and Cox Media, not so in the last 6+ months. >>> And if I try this at night I get slightly (but noticeably) less slow >>> results. Particularly frustrating, the last few days it took over twice as >>> long to upload to Telvue. AND normally the upload is not set and forget >>> ... it interrupts and I (the customer) have to reload and continue the >>> upload, which at least picks up where it left off. This happens more when >>> I try to upload multiple files at once; if I could just set 10 or 12 files >>> to uploading and come back later to a completed job, then I wouldn't care >>> as much that it's slow. >>> >>> >>> >>> >>> >>> >>> On Wed, Jan 26, 2022 at 7:00 AM Gibson Prichard <gib...@prichard.tv> >>> wrote: >>> >>>> First, when I connect to connect.telvue.com, it resolves as 8.39.99.30 >>>> and NOT 35.224.46.35, as you listed. There seems to be two or more entries >>>> in their DNS, but 8.39.99.30 seems to be on a Level3 (CenturyLink) backbone >>>> in Philadelphia and 35.224.46.35 resolves for me as " >>>> 35.46.224.35.bc.googleusercontent.com" on completely different IP >>>> space. When I go to https://35.224.46.35, I do get the Telvue website, >>>> but the SSL cert is from another entity - "giown1007.siteground.biz," >>>> which would seem that this could be a Google-hosted content distribution >>>> network. I will note that "telvue.com" resolves for to the >>>> 35.224.46.36 address, while "connect.telvue.com" resolves to >>>> 8.39.99.30 instead. Can you try uploading to Telvue through >>>> https://8.39.99.30 and see if that IP or server is faster for you? >>>> >>>> Secondly, and to your question as to whether you would be helped by a >>>> file upload service, I don't know that you would, since a file upload >>>> service (HighTail or WeTransfer or others) is is just a repository in the >>>> cloud to store files, which doesn't ultimately deliver your content to your >>>> destination of connect.telvue.com. Perhaps you could try to upload >>>> through a friend's Comcast connection as an alternative to your AT&T one to >>>> see if there really is an interconnect or throttling issue, but I don't >>>> think a file transfer service is your answer. It seems to me that >>>> https://connect.telvue.com / IP 35.224.46.35 is on a low-bandwidth or >>>> oversubscribed circuit or server farm. I don't see an interconnection issue >>>> to either site. >>>> >>>> Good luck. >>>> >>>> Gibson Prichard >>>> Nashville, TN >>>> gib...@prichard.tv >>>> >>>> >>>> >>>> On Wed, Jan 26, 2022 at 2:44 AM Michael L <helpwithmath...@gmail.com> >>>> wrote: >>>> > >>>> > Hello NLUG, >>>> > Do I need a file transfer service? Insight and suggestions will be >>>> much appreciated as always >>>> > I upload 22GB to 31GB of video weekly to Comcast and lesser amounts >>>> to Cox Media and Charter- >>>> > For Comcast I have to upload at this >>>> > URL: https://connect.telvue.com / IP 35.224.46.35 >>>> > By comparison, uploading to COMCAST TAKES OVER 8 TIMES LONGER ... ON >>>> A GOOD DAY!!! >>>> > >>>> > Here's a little graphic I sent them showing how slow Comcast Telvue >>>> is compared to Charter and Cox Media on a 1.9GB test file >>>> > (AND I SENT THEM THE TEST FILE SO THEY CAN TRY IT FOR THEMSELVES): >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > Charter CoxMedia Comcast Telvue >>>> > IS OVER >>>> > 2m47s 2m34s 22m21s <<<< 8 TIMES >>>> > >>>> > >>>> > >>>> > >>>> > SLOWER >>>> > >>>> > >>>> > I've been emailing Comcast's contact for 4 to 6 months about how slow >>>> this is and the only response I ever get is: "seems to be working fine" >>>> <<--- i.e., Not our problem; can't help ya. Finally Comcast management >>>> gets out of bed after months of hibernation and tells me: >>>> > >>>> > >>>> >>>> -- >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "NLUG" group. >>>> To post to this group, send email to nlug-talk@googlegroups.com >>>> To unsubscribe from this group, send email to >>>> nlug-talk+unsubscr...@googlegroups.com >>>> For more options, visit this group at >>>> http://groups.google.com/group/nlug-talk?hl=en >>>> >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "NLUG" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to nlug-talk+unsubscr...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/nlug-talk/CA%2BJ3mBC8sN1DOukS7ogSBXUvAS8Faqh364%3Dx2ZU1vFXWcFzivw%40mail.gmail.com >>>> <https://groups.google.com/d/msgid/nlug-talk/CA%2BJ3mBC8sN1DOukS7ogSBXUvAS8Faqh364%3Dx2ZU1vFXWcFzivw%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "NLUG" group. >>> To post to this group, send email to nlug-talk@googlegroups.com >>> To unsubscribe from this group, send email to >>> nlug-talk+unsubscr...@googlegroups.com >>> For more options, visit this group at >>> http://groups.google.com/group/nlug-talk?hl=en >>> >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "NLUG" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to nlug-talk+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/nlug-talk/CALdmzXabxzguvSszc5BZpMPm-yFKM0Ca0fJy12G6kK%2BKP4X54w%40mail.gmail.com >>> <https://groups.google.com/d/msgid/nlug-talk/CALdmzXabxzguvSszc5BZpMPm-yFKM0Ca0fJy12G6kK%2BKP4X54w%40mail.gmail.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- >> -- >> You received this message because you are subscribed to the Google Groups >> "NLUG" group. >> To post to this group, send email to nlug-talk@googlegroups.com >> To unsubscribe from this group, send email to >> nlug-talk+unsubscr...@googlegroups.com >> For more options, visit this group at >> http://groups.google.com/group/nlug-talk?hl=en >> >> --- >> You received this message because you are subscribed to the Google Groups >> "NLUG" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to nlug-talk+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/nlug-talk/CAL9PgS08uaYAYQkcwDqYz3tmE7fW6WwFBZyjmWzq8eHAYAwnBQ%40mail.gmail.com >> <https://groups.google.com/d/msgid/nlug-talk/CAL9PgS08uaYAYQkcwDqYz3tmE7fW6WwFBZyjmWzq8eHAYAwnBQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- > -- > You received this message because you are subscribed to the Google Groups > "NLUG" group. > To post to this group, send email to nlug-talk@googlegroups.com > To unsubscribe from this group, send email to > nlug-talk+unsubscr...@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/nlug-talk?hl=en > > --- > You received this message because you are subscribed to the Google Groups > "NLUG" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to nlug-talk+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/nlug-talk/CALdmzXZpS%2Br45_OeiXW8ohan1H0vLcBACxNw0ZA6iZCsfwyWrg%40mail.gmail.com > <https://groups.google.com/d/msgid/nlug-talk/CALdmzXZpS%2Br45_OeiXW8ohan1H0vLcBACxNw0ZA6iZCsfwyWrg%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- -- You received this message because you are subscribed to the Google Groups "NLUG" group. To post to this group, send email to nlug-talk@googlegroups.com To unsubscribe from this group, send email to nlug-talk+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/nlug-talk?hl=en --- You received this message because you are subscribed to the Google Groups "NLUG" group. To unsubscribe from this group and stop receiving emails from it, send an email to nlug-talk+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/nlug-talk/CAL9PgS26X2yEsCqSOF6Ex22DUhSA8MHDdhFp4cSDuPrdYw42YA%40mail.gmail.com.
