Thanks Howard i'll check it out :] On Tue, May 14, 2013 at 12:11 PM, Howard Jones <[email protected]>wrote:
> Ah Ok - I did write a local axis which is at the address below - this was > for because I had fbx stereo cameras and I wanted to do a precise IO > adjutment and found the jack no use for the reasons below. > Maybe that would help - break it apart and have a look, it's not rocket > science otherwise I'd be building rockets. > > There's probably better ways to do this though. Note you must select the > node first, then create the node and it cant be copy pasted otherwise the > transforms are incorrect. > > http://www.nukepedia.com/python/3d/localaxis/ > > Cheers > Howard > > ------------------------------ > *From:* Matan Arbel <[email protected]> > *To:* Nuke user discussion <[email protected]> > *Sent:* Tuesday, 14 May 2013, 9:59 > *Subject:* [Nuke-users] Re: Freeze transformation in nuke > > Well. Maybe I'm not getting the hang of it. > > But because each transform adds to the transformations it can get harder > to animate. > > > Lets say I got an fbx from the 3d department. > It has a card that sits where it should and its rotated 37.8337 on the z > away from the camera. And I want to animate it so the z axis is facing the > camera. Since the way it is now if I move it to the camera I need to move > it on z and x together and that makes is hard to control the curves. > > Hope I got my point through > > On Tuesday, May 14, 2013, Steve Newbold wrote: > > Not really sure why you need this? The joy of a node based workflow is > that you don't need to do things like freeze transforms. Simply add > another transform or axis node. > > Your card is translated and rotated away from 0,0,0. if you want to move > this further or rotate a specific amount relative to this, just add another > Translate between the object and the current transform. For this reason I > very rarely do transforms in the actual geo transform knobs. As long as > you put the transform nodes in the correct order you won't have problems > with things rotating around 0,0,0. > > Steve > > On 14/05/13 09:44, Matan Arbel wrote: > > How should a write geo do it? > A write geo will write the object again. > > I wondered if there's an easy way to freeze the transformation. Lets say > I have a card at 2.3,1,4 > And it's rotations are 12.32 , 18 , 180. > I want it to stay in the same place but the transformations to reset to > 0,0,0, > > Can I do this with the write geo without having to export an fbx? > > Sorry for the noob questions :) > > On Tuesday, May 14, 2013, Howard Jones wrote: > > would writeGeo do it? > > H > ------------------------------ > *From:* Matan Arbel <[email protected]> > *To:* Nuke user discussion <[email protected]> > *Sent:* Tuesday, 14 May 2013, 9:30 > *Subject:* [Nuke-users] Freeze transformation in nuke > > Hey all. > > > One thing I can't get my head around. > In 3d programs u have the option to freeze/delete history if a > transformation so u can animate things more easily. > > In nuke the use of axis or transformGeo nodes is a pain since u have > have to connect your nodes from 0,0,0 of the world. > > Is there a script or a simple way to achieve it in nuke? > > Thanks all. > > > -- > Sent from Gmail Mobile > > _______________________________________________ > Nuke-users mailing list > [email protected], http://forums.thefoundry.co.uk/ > http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users > > > > -- > Sent from Gmail Mobile > > > _______________________________________________ > Nuke-users mailing [email protected], > http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users > > > > > -- > Sent from Gmail Mobile > > _______________________________________________ > Nuke-users mailing list > [email protected], http://forums.thefoundry.co.uk/ > http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users > > > _______________________________________________ > Nuke-users mailing list > [email protected], http://forums.thefoundry.co.uk/ > http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users > -- -------------------------------------------------- Matan Arbel Motion/Graphic Designer matanarbel.com
_______________________________________________ Nuke-users mailing list [email protected], http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users
