Paul Fertser <[email protected]> writes: > Hi, > > On Thu, Apr 03, 2014 at 04:29:44PM +0200, Akos Vandra wrote: >> I've just seen that the new 0.8 candidate is out. > > Not yet, just a release candidate. > >> I tried searching through the list, however I could not find a >> definitive answer to wether SWD support was added or not? > > It was not added for the FTDI adapters, but chances are it will be > added next release (and for pure bitbanging too). That said, SWD with > STLink and CMSIS-DAP compliant adapters already works. > >> I know this was a hot topic between 0.6 and 0.7 with a lot of talk and >> code submissions from ceDROM's (with a lot of controversy). > > Apparently a way more cleaner implementation is possible, without > libswd etc, see wip patches on Gerrit. > >> So... Will I be able to use OpenOCD to program/debug my LPC >> controllers using SWD instead of JTAG? > > You already can if you get stlink or cmsis-dap or just self-compile > code from Gerrit.
Does stlink work with non-ST parts? I had assumed not, but if it *does* then any of the ~$10 discovery boards would make a useful general SWD programmer. -- John Devereux ------------------------------------------------------------------------------ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
