On 03.04.2014 19:18, Jens Bauer wrote: > Hi Akos. > > The adapters make a difference. For instance, My Olimex adapters would > require an add-on, which I do not have. > But the JTAG-lock-pick Tiny 2 works as is. You only need to connect 3 > Dupont-jumper wires to get SWD. > See my archive posted on the list earlier: > <http://scratch.gpio.dk/lpc8xx-cfg.zip> > > Support for a particular microcontroller also depends on a configuration file > being available. > If it's not there, you can write one yourself, so it's not a big issue. > > For programming the LPC812, I used one wire to connect SWDIO, one for SWCLK > and one for RESET (perhaps it could even work without RESET), oh, and I > almost forgot that I also connected GND. -Just corrected that in my ReadMe > file. :) In this case RESET normally does not need to be connected.
> > Love > Jens > > On Thu, 3 Apr 2014 17:34:34 +0200, Akos Vandra wrote: >> Hi all, >> >> Wow, forgot how responsive this community was. >> >> I was referring to the RC, sorry for the confusion. >> And I was referring to the FTDI programmers' support for SWD (which >> was obvious for me, but I have no idea why I thought it should be for >> you). >> I'm happy to hear that there are plans to get it out anytime soon, and >> that there are already patches out there. I'll have to dive in and >> take a look what's in there. >> >> It's no part in particular, but I'd love to ditch the bulky JTAG >> connections in favour of the SWD ones. >> >> Regards, >> Akos >> >> On 3 April 2014 17:13, Jens Bauer <[email protected]> wrote: >>> Hi Akos. >>> >>> What LPC parts in particular do you want to program/debug ? >>> -And which adapter do you have ? >>> >>> Yesterday I successfully flashed the LPC812 using JTAG-lock-pick Tiny 2. >>> I've also successfully flashed LPC1751 via SWD using the same adapter. >>> >>> >>> Love >>> Jens >>> >>> On Thu, 3 Apr 2014 16:29:44 +0200, Akos Vandra wrote: >>>> Hello! >>>> >>>> I've just seen that the new 0.8 candidate is out. >>>> I tried searching through the list, however I could not find a >>>> definitive answer to wether SWD support was added or not? >>>> I know this was a hot topic between 0.6 and 0.7 with a lot of talk and >>>> code submissions from ceDROM's (with a lot of controversy). >>>> >>>> So... Will I be able to use OpenOCD to program/debug my LPC >>>> controllers using SWD instead of JTAG? >>>> >>>> Thanks, >>>> Akos >>>> >>>> ------------------------------------------------------------------------------ >>>> _______________________________________________ >>>> OpenOCD-devel mailing list >>>> [email protected] >>>> https://lists.sourceforge.net/lists/listinfo/openocd-devel > > ------------------------------------------------------------------------------ > _______________________________________________ > OpenOCD-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/openocd-devel > ------------------------------------------------------------------------------ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
