Kathy Quinlan wrote: > Kathy Quinlan wrote: >> Kathy Quinlan wrote: >> >> Well I have fixed it for now, was to do with my ERC Matrix and pins on >> Parts I create all being passive pins :( I will print off the netlist >> and see if it is ok (or just suck and see on the PCB :) >> > > DAMN that was tooo quick, The Netlist is SCREWED, parts that should be > connected are not, some ERC markers are not errors in the NETLIST !!!! > > I need advice ?? >
OK in ERC in the MATRIX if I turn off the errors for unconnected to PASSIVE PIN and OUTPUT PIN, I get no errors flagged. BUT the netlist is FINE I have checked all the errors and they are not NOT CONNECTED in the NETLIST only on ERC !!! Why ? I take it this means if I have an output pin or a passive pin (eg 1 leg of a resistor) not connected to anything it will not flag it ? Is this just because of my LIBRARY ? (all the parts involved are parts I have created ? What should I do ? change all my Library Parts so that they are marked as what the pin does (eg inputs labelled as inputs etc) -- Regards, Kat. --------------------------------------------------------------- K.A.Q. Electronics Website: www.kaqelectronics.dyndns.org IM: Yahoo: PinkyDwaggy MSN: [EMAIL PROTECTED] For Everything Electronics Phone: 0419 923 731 --------------------------------------------------------------- -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.3.2/293 - Release Date: 26/03/2006 ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
