As I mentioned, the order of bus scanning is important to note. If you have devices with the same ID on both the internal bus and the external bus, the device on the internal bus takes precedence. Thus you only have access to 7 devices until 4.3 loads... Or so the theory (and documentation) goes. I should have time to do some testing this weekend.
I have never heard anything about 4.3 being in a JackHammer card, but I would suspect it would only be in effect for the card, and would not effect the built in internal / external bus problem. I will be sure to remove my JackHammer before I begin testing, i will also try it with the card to see if there seems to be any effect.
I have purchased most of the parts I need to make a new PDS card (for maximum Zoom!) and a replacement ROM card, but I have not (yet) figured out the ROM slot pin out. My thought is to replace the standard SCSI manager in ROM with 4.3.x (whatever the final version was)... I also need to include some custom code to accommodate some of the hardware changes I have already put in place (and wasn't there a memory bug issue... or was that just with A/UX?). So far my modified Q-950 is fast, but not FAST!
Derek
-- Quadlist is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
Quadlist info: <http://lowendmac.com/lists/quadlist.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/quadlist%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
