Wrenches,
....too many to list that have offered insights and suggestions, thanks
for all your input regarding wire management. I'm going to order some of the
suggestions given and also go back to more of my old installs and see how my
past wiring methods are holding up. Apparently the SS wire ties I was looking
at from Grainger were gold plated!
I appreciate all the input.
Bill
Feather River Solar Electric
----- Original Message -----
From: Ray Walters
To: RE-wrenches
Sent: Thursday, November 14, 2013 9:51 AM
Subject: Re: [RE-wrenches] PV Wiring methods
Where are you buying them from? I am so ready to move away from plastic zip
ties. 59 cents is quite a bit, but that's actually doable. Last time I looked
at SS ties, they were a couple bucks each.
Thanks,
R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760On 11/14/2013 9:41 AM, Kirpal Khalsa wrote:
Bill.....we have been using the Hellerman Tyton Sunbundler cable
ties....They are braided stainless steel wire with a UV resistant vinyl
jacket....We have been getting them in quantities of 500 for approximately $.59
each....for the 12" length ties....We like them alot....they do not have any
sharp edges and are easy to install....
Hope that helps....
Sunny Regards,
Kirpal Khalsa
NABCEP Certified PV Installation Professional
Renewable Energy Systems
www.oregonsolarworks.com
541-218-0201 m
541-592-3958 o_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
