Robert,
I know that 3com produced at least one 100Mb ISA card. I'm not sure if
it's still available...
You could connect the 486 to an auto sensing hub, where any connection
may be either 10Mb or 100Mb.
Regards
Gustav
Robert Glover wrote:
>
> I have a 486/66 that I want to use as a firewall for a cable-modem. What I
> really want is a 10MB ethernet card for the cable-modem and a 100MB card for
> the LAN.
>
> 100 Mbit .------------. 10 MBit .-------------.
> -------------| 486/66 |-----------| Cable-Modem |---- You folks
> LAN ------------ Straight -------------
> Cat-5
>
> My questions are:
>
> 1. Is there such a thing as a 100MB ISA ethernet card (cheap)?
>
> If I used two 10MB cards, I would have to have an additional
> gateway box just to connect the 10MB and 100MB segments,
> wouldn't I?
>
> 2. I know know the 100 MB card will be limited by the
> throughput of the other 10MB card, but...
>
> Will the 486 choke my internet throughput below 10MB?
> Can it handle 10MB in + 10MB out on an ISA bus?
>
> Thanks!
--
pgp = Pretty Good Privacy. To get my public pgp key, send an e-mail to:
[EMAIL PROTECTED]
Visit my web site at http://www.schaffter.com
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.