Hi Gordon, Thanks for your advice.
I started to boot RH7.2 at single mode (linux single). The PC halted after ; Enable SWAP space : [OK] sh - 2.05# I re-installed RH7.2 choosing LILO bootloader instead of Drub. After installation completed PC re-started and halted on LIL- I used the boot disk to start RH 7.2. This time it went straight through without problem with KDE started (default). My questions are ; 1) How to correct LIL- to boot Linux 2) What are the advantage and disadvantage between LILO and Drub Thanks in advance. B.R. Stephen At 12:31 PM 12/16/2001 -0800, you wrote: >On Mon, 17 Dec 2001, Stephen Liu wrote: > > > INIT : Switching to runlevel : 3 > > INIT : Sending processes to TERM signal > > tStarting automount : No Mountpoint Defined [OK] > > Starting lpd : No printers Defined [OK] > > Starting Wine [Failed] > > > > then the PC halted. > > > > I force-re-set (re-started) the PC. It halted again at the same point. > >Boot into single mode (press 'e' to edit your kernel arguments at GRUB, >select the "kernel" line, pres 'e' again, and add the word "single" to the >end of the line. Hit enter, then 'b' to boot) > >Use 'ntsysv' or 'chkconfig --level 3 wine off' to disable wine in the >startup sequence. If that lets you boot... apply errata and make your own >decisions about what you need from wine. _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
