Jackrabbit Slim wrote: > Thanks, I got them configured. One more question: How can I tell which > card (physically on the motherboard) is eth0 and eth1. Are they > automatically assigned in a certain order (e.g. top to bottom)?
With different brand/model cards, the cards are discovered in the order the kernel loads up the driver - and you can change that order. With identical cards, then it _usually_ discovers them in order of the bus. I have one server with 4 Intel Pro 100+ cards in it, and they're loaded top to bottom (when looking at the back of the server) - top being eth0. -- W | I haven't lost my mind; it's backed up on tape somewhere. +-------------------------------------------------------------------- Ashley M. Kirchner <mailto:[EMAIL PROTECTED]> . 303.442.6410 x130 IT Director / SysAdmin / WebSmith . 800.441.3873 x130 Photo Craft Laboratories, Inc. . 3550 Arapahoe Ave. #6 http://www.pcraft.com ..... . . . Boulder, CO 80303, U.S.A. _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list