The TS-64 that I had included a filter for the decoder. It filters out audio and only passes the 30 Hz to 300 Hz audio. Then that audio is feed into the decoder input.
Charles Miller ----- Original Message ----- From: "wb6ymh" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Thursday, September 09, 2004 7:26 PM Subject: [Repeater-Builder] Re: ts 64 pickup time? > --- In Repeater-Builder@yahoogroups.com, "Charles Miller" <ham- > [EMAIL PROTECTED]> wrote: > > I had the same problem with my TS-64 in my VHF Micor repeater. I > had to use > > the input filter on the TS-64 and it started to work as good or > better than > > the /\/\ decoder did. The discriminator audio has a lot of low > frequency > > noise that was causing the decoder to delay the decode about > 400mS. After > > the filter was used in took less than 100mS to decode. > > > > I have not had a single problem after doing that. > > > > Charles Miller. > > Sorry, I don't follow. You had to use what input filter? > > 73's Skip WB6YMH > > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/