The Communications Specialists web site shows no such configuration. Chuck WB2EDV
----- Original Message ----- From: "Charles Miller" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Friday, September 10, 2004 7:39 PM Subject: Re: [Repeater-Builder] Re: ts 64 pickup time? > The TS-64 that I had included a filter for the decoder. It filters out audio > and only passes the 30 Hz to 300 Hz audio. Then that audio is feed into the > decoder input. > > Charles Miller > > ----- Original Message ----- > From: "wb6ymh" <[EMAIL PROTECTED]> > To: <Repeater-Builder@yahoogroups.com> > Sent: Thursday, September 09, 2004 7:26 PM > Subject: [Repeater-Builder] Re: ts 64 pickup time? > > > > --- In Repeater-Builder@yahoogroups.com, "Charles Miller" <ham- > > [EMAIL PROTECTED]> wrote: > > > I had the same problem with my TS-64 in my VHF Micor repeater. I > > had to use > > > the input filter on the TS-64 and it started to work as good or > > better than > > > the /\/\ decoder did. The discriminator audio has a lot of low > > frequency > > > noise that was causing the decoder to delay the decode about > > 400mS. After > > > the filter was used in took less than 100mS to decode. > > > > > > I have not had a single problem after doing that. > > > > > > Charles Miller. > > > > Sorry, I don't follow. You had to use what input filter? > > > > 73's Skip WB6YMH > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/