OK, so tell us about your filter. Perhaps others will want to copy it!
"Charles Miller" <[EMAIL PROTECTED]> wrote: > I had the same problem with my TS-64 in my VHF Micor repeater. I had to use > the input filter on the TS-64 and it started to work as good or better than > the /\/\ decoder did. The discriminator audio has a lot of low frequency > noise that was causing the decoder to delay the decode about 400mS. After > the filter was used in took less than 100mS to decode. > > I have not had a single problem after doing that. > > Charles Miller. > > >I've recently added a ts64 to a 2 meter Micor repeater and have > >noticed that the PL decode time is noticeable, probably between 1/4 > >and 1/2 second. I'm use to Motorola PL decoders that have no > >noticeable pickup time. The ts64 decode seems to be solid with no > >problems talking it off. The input is right off the Micor's > >discriminator. Is this normal or do I have a problem? It's > >certainly an effective kurchunk filter! > > > >73's Skip WB6YMH > > > > > > > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/