Thanks, I hope you feel better soon.
Russ N4KOX --- In Repeater-Builder@yahoogroups.com, Mathew Quaife <[EMAIL PROTECTED]> wrote: > Well I am not so sure on that one just yet. Was told that the first element > was 26" from the top, and each element was 58 1/4" center to center from > there, and if that is true, then I'm going to end up with my last element > down into the clamp area. I've been sick most of this week, so have not > really messed with it. Hopefully Tuesday I will be feeling better and will > be able to get the harness on the antenna then. > > Mathew > > > > > Thank you, Mathew. I had been following the discussion of element > spacing. Now I need to measure my spacing to see if it is in the > right range - I suspect not. What was the spacing that you > determined was correct for yours? > > Russ > N4KOX > --- In Repeater-Builder@yahoogroups.com, Mathew Quaife <[EMAIL PROTECTED]> > wrote: > > They are 35 1/4" from top to bottom of the element. You will also > need to > > change the phasing harness. I have one here that had the elements > changed, > > but did not have the harness change, impedance was way out of > wack. I just > > ordered a new harness from Cook Towers, getting ready to install > it. > > > > Mathew > > > > > > > > I need to mesaure the DB224 I have for use at 145.11 Mhz. and > modify > > as necessary. > > > > Someone had given me the 2 meter loop "length" but I can not > locate > > it. Anyone know what it should be? or the range for Amateur 2 > > Meters vs. commercial 150+? > > > > Thanks a lot for your help. > > > > Russ > > N4KOX > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/