Yes, there are PF requirements for Energy Star products.
Chuck
----- Original Message -----
From: "Scott Zimmerman" <n3...@repeater-builder.com>
To: <Repeater-Builder@yahoogroups.com>
Sent: Tuesday, February 10, 2009 3:50 PM
Subject: Re: [Repeater-Builder] OT Power Factor
> My question is this: Are new energy star compliant appliances power factor
> corrected? In other words: To get the energy star compliance sticker, are
> they required to put enough capacitance in their product to correct the
> phase angle to 0?
>
> If they are already required to do this for compliance, isn't this going
> to
> be a self-correcting situation as time goes on. (Excuse the pun)
>
> Scott
>
> Scott Zimmerman
> Amateur Radio Call N3XCC
> 474 Barnett Rd
> Boswell, PA 15531
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Repeater-Builder/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:repeater-builder-dig...@yahoogroups.com
mailto:repeater-builder-fullfeatu...@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
repeater-builder-unsubscr...@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
