Yup-that's what I said ;c}
tsoli...@tir.com wrote:
> He only wants encode decode functions so it basicly hooks up just
> like a ts-32 or ts 64. It is explained in one of the ACC manuals
> about how to hook up a com-spec tp-3200 controller. I think it was in
> the ACC 850 manual you should be able to download a copy on RB. I
> think it was in the hardware reference manual.
>
> Comm Spec TP-38 Shared Repeater Tone Panel The TP-38 tone panel is a
> cost effective replacement for community repeater tone panels which
> are used to decode several different tones on a repeater system.
> Different groups of users sharing the repeater are each assigned
> their own tone frequency so that they don't need to listen to other
> users of the repeater who are not part of their group. In the
> application shown here, the TP-38 is used as a general purpose sub-
> audible tone decoder, connecting to the repeater receiver and
> providing a PL logic signal to the controller. The TP-38 decodes any
> or all of the 38 standard sub-audible tone frequencies. With its DTMF
> option, each tone may be enabled or disabled independently, remotely,
> using Touch-Tone commands (independent of the RC-850 command set).
> The unit can also cross code, or generate a different tone output in
> response to a particular received tone. Use of the TP-38 can provide
> the system owner the ultimate in flexibility in sub-audible tone
> operation. Program the hang time in the TP-38 to zero and connect it
> to the RC-850 controller as shown below. The TP-38's "PTT" output
> becomes the PL signal to the RC-850 controller.
>
> tom
>
> -----Original Message-----
>> From: wd8chl <wd8...@gmail.com> Sent: Feb 12, 2009 2:47 PM To:
>> Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder]
>> Re: Anyone ever interface a CSI TP3200 tone panel to an external
>> controller?
>>
>> All you have to do is, like you thought, program the 3200 for no
>> hang time and blank the ID's. The rx in to the 3200 comes from the
>> discriminator, like you probably have it now. A COS line from the
>> rx goes to the COS in on the NHRC. The PTT out from the 3200 goes
>> to the CTCSS in on the NHRC. Also tx audio out from the 3200 goes
>> to rx audio in to the NHRC. Encode CTCSS from the 3200 goes
>> straight to the CTCSS tone input on the exciter. About as simple as
>> it gets. The 3200 is a normal tone panel, and the NHRC is a
>> straight-forward ham controller, so this will apply to almost every
>> combination of tone panel/ham controller out there.
>>
>> AJ wrote:
>>> Any other CSI/NHRC experts out there have an idea on how to
>>> interface the CSI TP-3200 for encode/decode function to the
>>> NHRC-7 Controller?
>>>
>>> 73s,
>>>
>>> AJ, K6LOR
