Alright, finally put this in to ExpressSCH to match up roughly the general consensus:
http://www.vwreact.org/wp-content/uploads/2009/02/tp3200-to-nhrc.png Something along those lines? Thanks again for the input! -AJ, K6LOR On Tue, Feb 17, 2009 at 7:49 AM, wd8chl <wd8...@gmail.com> wrote: > Mike Pugh wrote: > > tsoli...@tir.com <tsoliver%40tir.com> wrote: > >> Program the hang time in the TP-38 to zero and connect it to the RC-850 > >> controller as shown below. > >> > >> > > I'd like to see this diagram as well, since I had been thinking about > > this for quite some time... However, at least on my copy of the original > > message, there is no "diagram below" Can it be sent again, or be sent > > directly to me? Thanks in advance. Mike Pugh KA4MKG > > > > If you've ever hooked a normal ham controller to a repeater, you don't > need a drawing. > The PTT output from the tone panel would go to the CTCSS input on the > controller. > The encode tone out would go wherever the CTCSS injection is on the > exciter. > Get COS for the controller the way you normally would from the rx. > Run raw discriminator audio to the rx input of the tone panel. > Transmit audio can either be taken from the tone panel or directly from > the rx the way you normally would if you didn't have the tone panel. > > About as simple as it gets. > > >
