Of course, the copy of the manual on RB doesn't have images... Go figure LOL :)
Thanks for the help! 73s, AJ, K6LOR On 2/12/09, wd8chl <wd8...@gmail.com> wrote: > Yup-that's what I said ;c} > > tsoli...@tir.com wrote: >> He only wants encode decode functions so it basicly hooks up just >> like a ts-32 or ts 64. It is explained in one of the ACC manuals >> about how to hook up a com-spec tp-3200 controller. I think it was in >> the ACC 850 manual you should be able to download a copy on RB. I >> think it was in the hardware reference manual. >> >> Comm Spec TP-38 Shared Repeater Tone Panel The TP-38 tone panel is a >> cost effective replacement for community repeater tone panels which >> are used to decode several different tones on a repeater system. >> Different groups of users sharing the repeater are each assigned >> their own tone frequency so that they don't need to listen to other >> users of the repeater who are not part of their group. In the >> application shown here, the TP-38 is used as a general purpose sub- >> audible tone decoder, connecting to the repeater receiver and >> providing a PL logic signal to the controller. The TP-38 decodes any >> or all of the 38 standard sub-audible tone frequencies. With its DTMF >> option, each tone may be enabled or disabled independently, remotely, >> using Touch-Tone commands (independent of the RC-850 command set). >> The unit can also cross code, or generate a different tone output in >> response to a particular received tone. Use of the TP-38 can provide >> the system owner the ultimate in flexibility in sub-audible tone >> operation. Program the hang time in the TP-38 to zero and connect it >> to the RC-850 controller as shown below. The TP-38's "PTT" output >> becomes the PL signal to the RC-850 controller. >> >> tom >> >> -----Original Message----- >>> From: wd8chl <wd8...@gmail.com> Sent: Feb 12, 2009 2:47 PM To: >>> Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] >>> Re: Anyone ever interface a CSI TP3200 tone panel to an external >>> controller? >>> >>> All you have to do is, like you thought, program the 3200 for no >>> hang time and blank the ID's. The rx in to the 3200 comes from the >>> discriminator, like you probably have it now. A COS line from the >>> rx goes to the COS in on the NHRC. The PTT out from the 3200 goes >>> to the CTCSS in on the NHRC. Also tx audio out from the 3200 goes >>> to rx audio in to the NHRC. Encode CTCSS from the 3200 goes >>> straight to the CTCSS tone input on the exciter. About as simple as >>> it gets. The 3200 is a normal tone panel, and the NHRC is a >>> straight-forward ham controller, so this will apply to almost every >>> combination of tone panel/ham controller out there. >>> >>> AJ wrote: >>>> Any other CSI/NHRC experts out there have an idea on how to >>>> interface the CSI TP-3200 for encode/decode function to the >>>> NHRC-7 Controller? >>>> >>>> 73s, >>>> >>>> AJ, K6LOR > >
