On 10/18/2013 9:12 AM, Paul Lacatus (Personal) wrote: > On 18.10.2013 08:29, Mihai Badici wrote: >> O >>>>> Și apropo, ar fi bine să le mute într-o distribuție mai ușor de ținut >>>>> la zi pe perioade mari de timp, dacă asta contează. >> Ador solutiile astea : pune alta distributie. Recomand Slackware :) >> Poate sistemul tau e mai vechi, procesor care nu stie de paie ( PAE)? >> lsusb ceva? cum nu merge? > AM facut fresh install de centos 6.4. Update la ultimul kernel . Acum nu mai am probleme la conectarea discului extern pe usb 3.0 dupa cum se vede in selectiile din dmesg de mai jos dar cind incerc sa transfer ceva viteza este la un penibil nivel de 2-3 MB/s ( 1/10 din usb2.0) si in dmesg apar mesaje periodice de reset . Vedeti mai jos erorile :
*fuse init (API version 7.13)** **usb 7-4: reset SuperSpeed USB device number 2 using xhci_hcd** **xhci_hcd 0000:01:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007bb10380** **xhci_hcd 0000:01:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007bb103c8** **usb 7-4: reset SuperSpeed USB device number 2 using xhci_hcd** **xhci_hcd 0000:01:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007bb10380** **xhci_hcd 0000:01:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007bb103c8** **usb 7-4: reset SuperSpeed USB device number 2 using xhci_hcd** **xhci_hcd 0000:01:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007bb10380** **xhci_hcd 0000:01:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007bb103c8** **usb 7-4: reset SuperSpeed USB device number 2 using xhci_hcd** **xhci_hcd 0000:01:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007bb10380** **xhci_hcd 0000:01:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007bb103c8** * si mesajele de kernel despre placa si disc *detectie in kernel placa usb 3.0 * *xhci_hcd 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16** **xhci_hcd 0000:01:00.0: setting latency timer to 64** **xhci_hcd 0000:01:00.0: xHCI Host Controller** **xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 6** **xhci_hcd 0000:01:00.0: irq 16, io mem 0xf2000000** ** alloc irq_desc for 27 on node -1** ** alloc kstat_irqs on node -1** **xhci_hcd 0000:01:00.0: irq 27 for MSI/MSI-X** **usb usb6: New USB device found, idVendor=1d6b, idProduct=0002** **usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1** **usb usb6: Product: xHCI Host Controller** **usb usb6: Manufacturer: Linux 2.6.32-358.23.2.el6.x86_64 xhci_hcd** **usb usb6: SerialNumber: 0000:01:00.0** **usb usb6: configuration #1 chosen from 1 choice** **xHCI xhci_add_endpoint called for root hub** **xHCI xhci_check_bandwidth called for root hub** **hub 6-0:1.0: USB hub found** **hub 6-0:1.0: 1 port detected** **xhci_hcd 0000:01:00.0: xHCI Host Controller** **xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 7** **usb usb7: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor** **usb usb7: New USB device found, idVendor=1d6b, idProduct=0003** **usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1** **usb usb7: Product: xHCI Host Controller** **usb usb7: Manufacturer: Linux 2.6.32-358.23.2.el6.x86_64 xhci_hcd** **usb usb7: SerialNumber: 0000:01:00.0** **usb usb7: configuration #1 chosen from 1 choice** **xHCI xhci_add_endpoint called for root hub** **xHCI xhci_check_bandwidth called for root hub** **hub 7-0:1.0: USB hub found** **hub 7-0:1.0: 4 ports detected** **intel_rng: FWH not detected** **iTCO_vendor_support: vendor-support=0** **usb 6-1: new high speed USB device number 2 using xhci_hcd** **iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh** **iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)** **iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)** **usb 6-1: New USB device found, idVendor=2109, idProduct=3431** **usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0** **usb 6-1: Product: USB2.0 Hub** **usb 6-1: configuration #1 chosen from 1 choice** **hub 6-1:1.0: USB hub found** **hub 6-1:1.0: 4 ports detected* *detectie hard extern usb 3.0* *usb 7-4: new SuperSpeed USB device number 2 using xhci_hcd** **usb 7-4: New USB device found, idVendor=0bc2, idProduct=3320** **usb 7-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1** **usb 7-4: Product: Expansion Desk** **usb 7-4: Manufacturer: Seagate** **usb 7-4: SerialNumber: NA4MAWQQ** **usb 7-4: configuration #1 chosen from 1 choice** **Initializing USB Mass Storage driver...** **scsi5 : SCSI emulation for USB Mass Storage devices** **usbcore: registered new interface driver usb-storage** **USB Mass Storage support registered.** **usb-storage: device found at 2** **usb-storage: waiting for device to settle before scanning** **usb-storage: device scan complete** **scsi 5:0:0:0: Direct-Access Seagate Expansion Desk 0711 PQ: 0 ANSI: 6** **sd 5:0:0:0: Attached scsi generic sg5 type 0** **sd 5:0:0:0: [sdf] Spinning up disk.............ready** **sd 5:0:0:0: [sdf] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)** **usb 7-4: reset SuperSpeed USB device number 2 using xhci_hcd** **xhci_hcd 0000:01:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007bb10380** **xhci_hcd 0000:01:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007bb103c8** **sd 5:0:0:0: [sdf] Write Protect is off** **sd 5:0:0:0: [sdf] Mode Sense: 4f 00 00 00** **sd 5:0:0:0: [sdf] Assuming drive cache: write through** **sd 5:0:0:0: [sdf] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)** **sd 5:0:0:0: [sdf] Assuming drive cache: write through** ** sdf: sdf1** **sd 5:0:0:0: [sdf] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)** **sd 5:0:0:0: [sdf] Assuming drive cache: write through** **sd 5:0:0:0: [sdf] Attached SCSI disk** * _______________________________________________ RLUG mailing list RLUG@lists.lug.ro http://lists.lug.ro/mailman/listinfo/rlug
