Re: Well Well Well CCIE #8757 [7:34951]
Congrats.. Good Show. --- "McCallum, Robert" wrote: > What can I say! 2nd and it really did turn out to be my > last attempt. > > Thanks to everyone concerned who know me or have indeed > spoke or emailed me. > > In the words of the most inspirational man WOHO!! > > > Robert McCallum CCIE #8757 [EMAIL PROTECTED] = Thanks & Regards V Anil Kumar __ Do You Yahoo!? Send FREE Valentine eCards with Yahoo! Greetings! http://greetings.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34954&t=34951 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IP telephony [7:27533]
Hi All, For a customer i have implemented an Voip and Ip telephony between two office with Cisco Call Manager 3.0. I need to intergrate the CCM with Normal PBX phones, so that users can dail to the normal telephone to Ip telephone. For the Voip i am using Cisco 3640 and 3660 Routers with NM-HDV cards and both the HDV cards are connected to Nortel PBX. Need help/sugesstion on this. Thanks in Advance. Regards.. Anil = Thanks & Regards V Anil Kumar __ Do You Yahoo!? Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month. http://geocities.yahoo.com/ps/info1 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27533&t=27533 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: IP telephony [7:27533]
This is the Voice network i am implementing. Voip on this network is working. Analog PhoneAnalog Phone | | | | | | IPtelphone->CCM3.0->3660 Router-->3640 Router-->IPtelephone With NM-HDVWith NM-HDV (Main Office) (Remote Office) The problem which i am facing is the call routing between the IP telephone & the Analog phones to both locations. I am bit confused, and not sure to use which type of Gateway Types ( MGCP, or H.323) for the 3660 Routers. I read that MGCP is being used for mainly FXS/ FXO ports. I am using an R2 Digital Signalling for the NM-HDV card. I have enclosed the config of the main location, the same carries for the remote location too. Request your sugesstion / Comments on this. Regards.. Anil Current configuration: ! version 12.1 service timestamps debug datetime msec service timestamps log uptime no service password-encryption service udp-small-servers max-servers no-limit ! ! enable secret 5 $1$QdNt$.YqZyaiFoHfFW.ZP1yHzG/ ! ! ! ! ! memory-size iomem 10 voice-card 2 ! ip subnet-zero ip dhcp ping timeout 2000 ip dhcp relay information option ! ip dhcp-server 179.65.51.20 lane client flush isdn switch-type primary-net5 cns event-service server ! ! voice class permanent 10 signal pattern idle transmit 0001 signal pattern idle receive 0001 ! ! ! ! ! ! controller E1 1/0 framing NO-CRC4 clock source internal channel-group 1 timeslots 1-31 description connected to Branch ! controller E1 2/0 framing NO-CRC4 clock source internal ds0-group 0 timeslots 1-15,17-31 type r2-digital dtmf dnis description CONNECTED TO NORTEL EPABX ! ! ! interface Multilink1 ip address 192.168.0.2 255.255.255.252 ip helper-address 179.65.51.20 ip directed-broadcast ip tcp header-compression iphc-format no ip mroute-cache fair-queue 2048 2048 1000 no cdp enable ppp multilink ppp multilink fragment-delay 20 ppp multilink interleave multilink-group 1 ip rtp header-compression iphc-format ip rtp priority 16384 16383 1488 ! interface FastEthernet0/0 ip address 179.65.51.1 255.255.0.0 ip helper-address 179.65.51.20 ip directed-broadcast no ip mroute-cache speed auto half-duplex no cdp enable ! interface Serial1/0:1 no ip address ip helper-address 179.65.51.20 ip directed-broadcast encapsulation ppp ip mroute-cache no fair-queue ppp multilink multilink-group 1 ! ip classless ip route 0.0.0.0 0.0.0.0 192.168.0.1 no ip http server ! dialer-list 1 protocol ip permit dialer-list 1 protocol ipx permit no cdp advertise-v2 ! snmp-server engineID local 000902024B24BF30 snmp-server community public RO snmp-server packetsize 2048 ! voice-port 2/0:0 no modem passthrough cptone GB ! dial-peer voice 100 voip destination-pattern 125T session target ipv4:192.168.0.1 codec g711alaw ip precedence 5 ! dial-peer voice 10 pots destination-pattern 116T port 2/0:0 forward-digits all ! ! line con 0 transport input none line aux 0 line vty 0 4 exec-timeout 20 0 login ! end HO# __ Do You Yahoo!? Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month. http://geocities.yahoo.com/ps/info1 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27676&t=27533 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: IP telephony [7:27533]
This is the Voice network i am implementing. Voip on this network is working. Analog PhoneAnalog Phone | | | | | | IPtelphone->CCM3.0->3660 Router-->3640 Router-->IPtelephone With NM-HDVWith NM-HDV (Main Office) (Remote Office) The problem which i am facing is the call routing between the IP telephone & the Analog phones to both locations. I am bit confused, and not sure to use which type of Gateway Types ( MGCP, or H.323) for the 3660 Routers. I read that MGCP is being used for mainly FXS/ FXO ports. I am using an R2 Digital Signalling for the NM-HDV card. I have enclosed the config of the main location, the same carries for the remote location too. Request your sugesstion / Comments on this. Regards.. Anil Current configuration: ! version 12.1 service timestamps debug datetime msec service timestamps log uptime no service password-encryption service udp-small-servers max-servers no-limit ! ! enable secret 5 $1$QdNt$.YqZyaiFoHfFW.ZP1yHzG/ ! ! ! ! ! memory-size iomem 10 voice-card 2 ! ip subnet-zero ip dhcp ping timeout 2000 ip dhcp relay information option ! ip dhcp-server 179.65.51.20 lane client flush isdn switch-type primary-net5 cns event-service server ! ! voice class permanent 10 signal pattern idle transmit 0001 signal pattern idle receive 0001 ! ! ! ! ! ! controller E1 1/0 framing NO-CRC4 clock source internal channel-group 1 timeslots 1-31 description connected to Branch ! controller E1 2/0 framing NO-CRC4 clock source internal ds0-group 0 timeslots 1-15,17-31 type r2-digital dtmf dnis description CONNECTED TO NORTEL EPABX ! ! ! interface Multilink1 ip address 192.168.0.2 255.255.255.252 ip helper-address 179.65.51.20 ip directed-broadcast ip tcp header-compression iphc-format no ip mroute-cache fair-queue 2048 2048 1000 no cdp enable ppp multilink ppp multilink fragment-delay 20 ppp multilink interleave multilink-group 1 ip rtp header-compression iphc-format ip rtp priority 16384 16383 1488 ! interface FastEthernet0/0 ip address 179.65.51.1 255.255.0.0 ip helper-address 179.65.51.20 ip directed-broadcast no ip mroute-cache speed auto half-duplex no cdp enable ! interface Serial1/0:1 no ip address ip helper-address 179.65.51.20 ip directed-broadcast encapsulation ppp ip mroute-cache no fair-queue ppp multilink multilink-group 1 ! ip classless ip route 0.0.0.0 0.0.0.0 192.168.0.1 no ip http server ! dialer-list 1 protocol ip permit dialer-list 1 protocol ipx permit no cdp advertise-v2 ! snmp-server engineID local 000902024B24BF30 snmp-server community public RO snmp-server packetsize 2048 ! voice-port 2/0:0 no modem passthrough cptone GB ! dial-peer voice 100 voip destination-pattern 125T session target ipv4:192.168.0.1 codec g711alaw ip precedence 5 ! dial-peer voice 10 pots destination-pattern 116T port 2/0:0 forward-digits all ! ! line con 0 transport input none line aux 0 line vty 0 4 exec-timeout 20 0 login ! end HO# __ Do You Yahoo!? Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month. http://geocities.yahoo.com/ps/info1 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27677&t=27533 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
NM-16A [7:28057]
Hi All, I need to configure a 3660 Router with NM-16A for dialin users. Does the NM-16A Card needs the modem firmware loaded to the router, as what is done in AS5800. Suggestions and Comments are welcome. Thanks in Advance. Regards...Anil __ Do You Yahoo!? Buy the perfect holiday gifts at Yahoo! Shopping. http://shopping.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28057&t=28057 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help on CLID [7:30179]
For one customer I am implementing the dial solution. The customer has got a 3662 router with NM-16A card. For the authentication, the ACS for Windows NT/2000 has been configured. The username database for the ACS is obtanined through the Windows NT Domain. Inorder to have more security, apart for username / password authentication the customer wants the CLID facility to be enabled so that the users logs in through one telephone line only. How can the CLID be enabled on NM-16A for a 3660 router? Request for help. Thanks in Advance, Regards.. Anil Kumar __ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30179&t=30179 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Half Successfull ping [7:30449]
Feel like you are having 2 routes pointing on the same destination, through two diffrent interfaces. Have a look on the routing. Regards --- McHugh Randy wrote: > Anyone have an ideas on this half successfull ping across > two directly > connect serial interfaces? Clock rate, encapsulation, > controllers and cables > look OK. Address on R4 is 172.16.1.4/24 and R2 is > 172.16.1.5/24 . Here is > the ping from R4 > R4#ping 172.16.1.5 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 172.16.1.5, timeout is > 2 seconds: > .!.!. > Success rate is 40 percent (2/5), round-trip min/avg/max > = 32/32/32 ms > > Same thing from R2 to R4 > R2#ping 172.16.1.4 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 172.16.1.4, timeout is > 2 seconds: > !.!.! > Success rate is 60 percent (3/5), round-trip min/avg/max > = 28/30/32 ms > Thanks > Randy [EMAIL PROTECTED] __ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30464&t=30449 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Question on VPN [7:43110]
Hi All, Need a small clarifcation on VPN. One of the customer is having a Lease Line connection to Internet at the head office and they are having branch offices at remote location.Since being a lease line they have obtained static IP address from ISP. The branch locations will be dialing into the local ISP and all the times the remote locations will be getting dynamic IP address. Since the customer want to have a secure connection through VPN is it possible to attain and establish a IPSEC VPN tunnel between a dialup connection and the lease line router. If so please let me know how the same can be attanied. Thanks in advance. Regards.. Anil Kumar. = Thanks & Regards V Anil Kumar __ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43110&t=43110 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
PIX question [7:45658]
Hi All, Does the PIX fw support secondary ip address option for the interface, as which is carried out on router ethernet interface? Thanks in Advance. Regards.. Anil __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45658&t=45658 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Clarification needed on PIX [7:45663]
Hi All, Does the PIX FW support secondary ip address option for the interface, as in Cisco router ethernet interface? Thanks in Advance for the reply. Regards.. Anil __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45663&t=45663 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: It's Official - CCNP 6xx series [7:45867]
Yes. Even Cisco Site tells the same http://www.cisco.com/warp/public/10/wwtraining/whats_new/ Regards.. Anil --- "Kaminski, Shawn G" wrote: > Just called Prometric and VUE for information on when > they're switching to > the new CCNP 6xx series exams. As of this afternoon, > 6/5/02, the CCNP 5xx > series exams are no longer available. > > Shawn K. [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45926&t=45867 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Clarification On DDR with NAT [7:46149]
Hi All, Need clarfication on DDR with NAT. I have got a Lease Line to Internet connected through Cisco Router and PIX firewall. Internet Lease Line-->Router--> PIX outside--> PIX Inside. I have been provided a /30 subnet for WAN and /28 subnet for LAN by the local ISP. Now i need to provide a DDR for the lease line incase of lease line outages. I have configured the DDR, but each time i dial ISP i am being assigned a dynmic IP address and local ISP does not provide any staitc ip address. Due to this dynamic Ip address allocation i am not able to route the local lan traffic or to provide browsing faclity. I thought of configuring a NAT with /28 obtained from ISP, but is this a better solution? Another problem which i noticed Cisco Allows only one Overload command at a time either it should on the serial interface or it should be on the dialer interface. Is there any way i can provide both the overloads at the same time, like higher metric routes. Need your valuable inputs and sugesstion on this. Thanks in Advance, Regards.. Anil __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46149&t=46149 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
DDR with NAT [7:46177]
Hi All, Need clarfication on DDR with NAT. I have got a Lease Line to Internet connected through Cisco Router and PIX firewall. Internet Lease Line-->Router--> PIX outside--> PIX Inside. I have been provided a /30 subnet for WAN and /28 subnet for LAN by the local ISP. Now i need to provide a DDR for the lease line incase of lease line outages. I have configured the DDR, but each time i dial ISP i am being assigned a dynmic IP address and local ISP does not provide any staitc ip address. Due to this dynamic Ip address allocation i am not able to route the local lan traffic or to provide browsing faclity. I thought of configuring a NAT with /28 obtained from ISP, but is this a better solution? Another problem which i noticed Cisco Allows only one Overload command at a time either it should on the serial interface or it should be on the dialer interface. Is there any way i can provide both the overloads at the same time, like higher metric routes. Need your valuable inputs and sugesstion on this. Thanks in Advance, Regards.. Anil Thanks & Regards V Anil Kumar - Do You Yahoo!? Sign-up for Video Highlights of 2002 FIFA World Cup Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46177&t=46177 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Query on Site to Site VPN [7:46712]
Hi All, I have an office which is connected to internet through an ISDN line with a router.PIX firewall has been installed and connected in the same office. I have another office which is having a lease line to internet connected with PIX. The standard config has been followed on both the PIX firewalls. Now if i need to create a site-to-site VPN tunnel between these PIX, will it work, since once side i am getting a dynamic IP address from the ISP(ISDN Line). Other side since being a Lease Line, i have obtained static IP address. Is it nessasary that i need to have both the side static Ip address. Can some one help on this.. Thanks in Advance.. Regards..Anil - Do You Yahoo!? Sign-up for Video Highlights of 2002 FIFA World Cup Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46712&t=46712 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCNP-New Track [7:47178]
Hi, I am planning to take up the CCNP exams by next week. Can anyone tell what are passing score for 640-603, 604,605 and 606. Thanks in Advance. Regards...Anil - Do You Yahoo!? Sign-up for Video Highlights of 2002 FIFA World Cup Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47178&t=47178 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Wireless Exam [7:59035]
Hi, I am planning to take the Wireless LAN exam for field engineers next week. Anyone who has taken the test recently could please provide the last min tips about no of questions/ passing score/ areas to be concentrate. Thanks in Advance, Regards..Anil __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59035&t=59035 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
1700 Flash Error [7:48809]
Hi All, I have got a 1750 Router. While switching on the router comes to rommon prompt and i am getting the following error message. rommon 3 > bus error while trying to access flash - addr = 0x6000 cannot read flash info getdevnum warning: device "flash" has size of zero bus error while trying to access flash - addr = 0x6000 cannot read flash info getdevnum warning: device "flash" has size of zero bus error while trying to access flash - addr = 0x6000 cannot read flash info getdevnum warning: device "flash" has size of zero bus error while trying to access flash - addr = 0x6000 cannot read flash info getdevnum warning: device "flash" has size of zero open: read error...requested 0x4 bytes, got 0x0 trouble reading device magic number dir: cannot open device "flash:" rommon 4 > Infact as per cisco site, i tried to load other flash image file, and after loading the same i applied the command bootsystem flash:. But inspite of doing this, i am getting the same above error message. Any sugesstion or help will be really appreciated. Thanks in Advance. Regards.. Anil __ Do You Yahoo!? Yahoo! Autos - Get free new car price quotes http://autos.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48809&t=48809 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Routing Protocol PIX Firewall ? [7:50625]
Hi Friends, I am planning to deploy a network in the following manner. R1 ---> PIX INSIDEPIX OUTSIDE --> INTERNET ROUTER | PIX DMZ | | R2 R1 ( FOR LEASE LINE AND DDR FOR LEASE LINE) R2 ( FOR DIAL UP CUSTOMERS) For security reasons i am planning to have the dialup customers on one router(R2) and Lease line customers on other router (R1). Infact i wanted a routing protocol to be enabled on the network. Since one router is inside the DMZ zone and another router inside interface I am not sure will the routing updates will be passed through the PIX firwall. Another question , as per the above network if i use a RADIUS server for the dial in authentication and if i place the server in the inside segment (PIX) will the authentication/ accounting ports(1645 and 1646) will passed through the PIX firewall. Request your expert comments and sugesstion the above design. Thanks in Advance. Regards...Anil __ Do You Yahoo!? Yahoo! Health - Feel better, live better http://health.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50625&t=50625 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Doubt on CLID [7:53370]
Hi Fayyaz, Thanks a lot for the info. As i was going through the Cisco Site and read across Cisco RPM, by configuring RPM will it help the modules to collect the digits? Other than ISDN any other alternative meathod is there? RegardsAnil --- Fayyaz Ahmed wrote: > Hi Anil, > > what you want to do is not possible with your current > hardware. Cisco > support caller ID on none of the analog modem products: > neither the WIC-AM > nor the NM-AM. The problem is that cisco analog modems, > (WIC-1AM, WIC-2AM, > NM-8AM, and NM-16AM) have no way to collect the caller ID > information and > pass it to IOS for processing. > You can screen by phone number using ISDN using the > 'dialer caller' command. > The reason it works with ISDN is that the call setup > message includes the > caller ID information. Unfortunatly the analog modems do > not support caller > ID, so we will be unable to collect the digits from the > switch. > I guess an alternate setup for caller ID authentication > would be to replace > the analog modem with a NM-6DM (6 Digital modems) and a > ISDN network module, > which would support CLID/ANI (if presented to us by the > switch.). This would > allow the ISDN switch to pass caller ID to the router. > > Kind Regards > > Fayyaz > > -Original Message- > From: Anil Kumar [mailto:[EMAIL PROTECTED]] > Sent: Sunday, September 15, 2002 1:32 PM > To: [EMAIL PROTECTED] > Subject: Doubt on CLID [7:53370] > > > Hi All, > > I have got following network setup. Cisco 3660 router > with > NM-16AM card. I have got a Cisco ACS v2.6 server for the > aaa function. The router is configured for the aaa for > the > dail in users. > > In order to have more security on the dail in users, i > wanted to enable the CLID faclity for the authentication > apart from the username & password. The analog lines has > been enabled with the CLID faclity by the service > provider. > > In order to make the above work does the router needs to > configured so that to pass the dialled digits to the ACS > server? > If so, please let me know the sample configuration / URL > for the router and if any special IOS is also required > for > the router. > > The 3660 Router is having 12.1 IOS version. > > Requst your help on this. > > Thanks in Advance, > > Regards...Anil > > __ > Do you Yahoo!? > Yahoo! News - Today's headlines > http://news.yahoo.com [EMAIL PROTECTED] __ Do you Yahoo!? Yahoo! News - Today's headlines http://news.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53480&t=53370 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Doubt on CLID [7:53370]
Hi Fayyaz, Thanks a lot for the information which u have given. While going through the Cisco Site, I was reading about Cisco RPM.Will Cisco RPM help or any one has tried the same? By upgrading the Cisco IOS will i be able to collect the digits on the Analog Modems with the help og Cisco RPM? Is there any other alternative meathod with the same setup. RegardsAnil --- Fayyaz Ahmed wrote: > Hi Anil, > > what you want to do is not possible with your current > hardware. Cisco > support caller ID on none of the analog modem products: > neither the WIC-AM > nor the NM-AM. The problem is that cisco analog modems, > (WIC-1AM, WIC-2AM, > NM-8AM, and NM-16AM) have no way to collect the caller ID > information and > pass it to IOS for processing. > You can screen by phone number using ISDN using the > 'dialer caller' command. > The reason it works with ISDN is that the call setup > message includes the > caller ID information. Unfortunatly the analog modems do > not support caller > ID, so we will be unable to collect the digits from the > switch. > I guess an alternate setup for caller ID authentication > would be to replace > the analog modem with a NM-6DM (6 Digital modems) and a > ISDN network module, > which would support CLID/ANI (if presented to us by the > switch.). This would > allow the ISDN switch to pass caller ID to the router. > > Kind Regards > > Fayyaz > > -Original Message- > From: Anil Kumar [mailto:[EMAIL PROTECTED]] > Sent: Sunday, September 15, 2002 1:32 PM > To: [EMAIL PROTECTED] > Subject: Doubt on CLID [7:53370] > > > Hi All, > > I have got following network setup. Cisco 3660 router > with > NM-16AM card. I have got a Cisco ACS v2.6 server for the > aaa function. The router is configured for the aaa for > the > dail in users. > > In order to have more security on the dail in users, i > wanted to enable the CLID faclity for the authentication > apart from the username & password. The analog lines has > been enabled with the CLID faclity by the service > provider. > > In order to make the above work does the router needs to > configured so that to pass the dialled digits to the ACS > server? > If so, please let me know the sample configuration / URL > for the router and if any special IOS is also required > for > the router. > > The 3660 Router is having 12.1 IOS version. > > Requst your help on this. > > Thanks in Advance, > > Regards...Anil > > __ > Do you Yahoo!? > Yahoo! News - Today's headlines > http://news.yahoo.com [EMAIL PROTECTED] = Thanks & Regards V Anil Kumar __ Do you Yahoo!? Yahoo! News - Today's headlines http://news.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53532&t=53370 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Password Breaking for 2511 [7:53848]
Hi All, I have got a doubt on password breaking for Cisco 2511 Router. As per the cisco document, if i break, will i loose the old configuration? Regards.. Anil __ Do you Yahoo!? New DSL Internet Access from SBC & Yahoo! http://sbc.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53848&t=53848 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Call Back on NM-16AM [7:54030]
he shutdown dialer in-band dialer idle-timeout 5000 async mode interactive peer default ip address 10.5.1.11 ppp authentication pap chap ! interface Async108 ip unnumbered FastEthernet0/0 ip access-group 100 in ip helper-address 10.1.1.6 encapsulation ppp ip tcp header-compression passive no ip mroute-cache shutdown dialer in-band dialer idle-timeout 5000 async mode interactive peer default ip address 10.5.1.12 ppp authentication pap chap ! interface Async109 ip unnumbered FastEthernet0/0 ip access-group 100 in ip helper-address 10.1.1.6 encapsulation ppp ip tcp header-compression passive no ip mroute-cache shutdown dialer in-band dialer idle-timeout 5000 async mode interactive peer default ip address 10.5.1.13 ppp authentication pap chap ! interface Async110 ip unnumbered FastEthernet0/0 ip access-group 100 in ip helper-address 10.1.1.6 encapsulation ppp ip tcp header-compression passive no ip mroute-cache shutdown dialer in-band dialer idle-timeout 5000 async mode interactive peer default ip address 10.5.1.14 ppp authentication pap chap ! interface Async111 ip unnumbered FastEthernet0/0 ip access-group 100 in ip helper-address 10.1.1.6 encapsulation ppp ip tcp header-compression passive no ip mroute-cache shutdown dialer in-band dialer idle-timeout 5000 async mode interactive peer default ip address 10.5.1.15 ppp authentication pap chap ! interface Async112 ip unnumbered FastEthernet0/0 ip access-group 100 in ip helper-address 10.1.1.6 encapsulation ppp ip tcp header-compression passive no ip mroute-cache shutdown dialer in-band dialer idle-timeout 5000 async mode interactive peer default ip address 10.5.1.16 ppp callback accept ppp authentication pap chap ! ip local pool dailin 10.5.1.1 10.5.1.51 ip classless ip route 0.0.0.0 0.0.0.0 FastEthernet0/0 ip route 10.2.0.0 255.255.0.0 Serial2/1 ip route 10.3.0.0 255.255.0.0 Serial2/2 ip route 10.4.0.0 255.255.0.0 Serial2/0 ip route 10.5.0.0 255.255.0.0 FastEthernet0/0 ip route 10.5.1.1 255.255.255.255 Async97 no ip http server ! access-list 100 permit ip 10.5.1.0 0.0.0.255 host 10.1.1.6 access-list 100 permit tcp 10.5.1.0 0.0.0.255 host 10.1.1.6 access-list 100 permit udp any host 10.1.1.10 access-list 100 deny ip any any ! dialer-list 1 protocol ip permit dialer-list 1 protocol ipx permit radius-server host 10.1.1.10 auth-port 1645 acct-port 1646 key xxx radius-server retransmit 5 radius-server timeout 20 radius-server key cb0123 ! line con 0 authorization commands 15 NO_AUTHOR login authentication NO_AUTHEN transport input none line 97 exec-timeout 0 0 autoselect ppp script dialer mod script callback mod modem InOut autocommand line transport input all telnet transparent callback forced-wait 5 flowcontrol hardware line 98 112 session-timeout 5000 autoselect during-login autoselect ppp script callback asyn modem InOut autocommand ppp transport preferred none transport input all telnet transparent line aux 0 line vty 0 4 exec-timeout 60 0 password 7 05080F1C2243 ! end = Thanks & Regards V Anil Kumar __ Do you Yahoo!? New DSL Internet Access from SBC & Yahoo! http://sbc.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54030&t=54030 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Wireless LAN Exam [7:54608]
Hi, Can any one suggest good books/ URL for the Wireless LAN exam, as the part of Partner Specialization program. Thanks in Advance. Regards... Anil __ Do you Yahoo!? New DSL Internet Access from SBC & Yahoo! http://sbc.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54608&t=54608 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Wireless LAN-Book [7:54657]
Can any one suggest any book / url for the Wireless LAN Specialization for Cisco Partners. Regards.Anil - Do you Yahoo!? New DSL Internet Access from SBC & Yahoo! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54657&t=54657 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IP SoftPhone- Problem [7:62558]
Hi All, I have a problem facing with IP SoftPhone. Let me explain about the IP Telephone Network setup This is for one of the customer who has got an IP Telephone Setup. The network is having a CCM 3.1(4) Version. Around 4 numbers of IP Phones (7960 & 7910) has been installed on this network and all the phones are working perfectly. The customer has got one Cisco SoftPhone (v1.3). This SoftPhone is installed on the one of the client Machine which is having Windows XP as OS. Below is the problem which I am facing. After installing & opening the Soft Phone, I am not able to see any lines (extension) for the particular soft phone and its coming as blank. I have configured the CTI Port, and i have associated the device to the particular user. Inspite of the same i am not able get any lines for the SoftPhone. I have gone through the Cisco Documentation Cisco IP SoftPhone Administration v 1.3. As per the documentation I did the troubleshooting to find out what is the problem, but not able to get a breakthrough. On the call manager I checked the event viewer and provides follwoing error message. 2/4/20031:15:03 PM Cisco CTIManagerError None3 N/A CALLMGR Error: kCtiIncompatibleProtocolVersion - Incompatible protocol version. UNKNOWN_PARAMTYPE:Message Version: 196608 UNKNOWN_PARAMTYPE:Minimum Version: 131072 UNKNOWN_PARAMTYPE:Current Version: 131072 App ID: Cisco CTIManager Cluster ID: CALLMGR-Cluster Node ID: CALLMGR Application ID: Cisco Telephony Call Dispatcher Process ID: 0 Process Name: CtiHandler Provider Name: CTI Framework Explanation: The JTAPI/TAPI application version is not compatible with this version of CTIManager, so received message has been rejected. Recommended Action: Verify correct version of application is being used; otherwise, contact TAC.. I installed the same software on another machine, tested it and its working without any problem and I am able to place the calls from the softphone to other IP Phones. Has anyone faced this porblem before? Can any one give idea / solution for this? Regards...Anil __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62558&t=62558 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
PRI Module [7:65734]
Hi, I have a doubt. If I have a 2600 Router with ISDN PRI network module. The module will be terminated with and ISDN PRI line. Does this PRI modeul can accept normal Analog calls or do i need to have a analog modem pool to receive the calls. Can some one give an idea. = Thanks & Regards V Anil Kumar __ Do you Yahoo!? Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop! http://platinum.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65734&t=65734 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]