Please help with sendmail-fetchmail problem
I am running Debian Woody as up to date as I can get. I have 3 mail servers on the net that I want to get my mail onto my local machine I figure fetchmail to get the mail by pop3 and sendmail on my local server to deliver it to my local mailboxes. I keep getting error messages that refer to the inability of sendmail not finding anything in the /etc/mail/ssl directories and fetchmail cannot authenticate the mailbox user. Here are the errors out of the syslog file: Jun 4 21:48:18 schserv fetchmail[3050]: Authorization failure on [EMAIL PROTECTED] Jun 4 21:48:18 schserv fetchmail[3050]: Query status=3 (AUTHFAIL) Jun 4 21:48:24 schserv fetchmail[3050]: Authorization failure on [EMAIL PROTECTED] Jun 4 21:48:24 schserv fetchmail[3050]: Query status=3 (AUTHFAIL) Jun 4 21:50:01 schserv /USR/SBIN/CRON[3213]: (smmsp) CMD (test -x /usr/share/sendmail/sendmail && /usr/share/sendmail/sendmail cron-msp) Jun 4 21:50:01 schserv sm-msp-queue[3227]: STARTTLS=client: file /etc/mail/ssl/sendmail-client.crt unsafe: No such file or directory Jun 4 21:50:01 schserv sm-msp-queue[3227]: STARTTLS=client: file /etc/mail/ssl/sendmail-common.key unsafe: No such file or directory Jun 4 21:50:01 schserv sm-msp-queue[3227]: STARTTLS=client: file /etc/mail/ssl/sendmail-server.crt unsafe: No such file or directory Jun 4 21:50:01 schserv sm-msp-queue[3227]: STARTTLS=client, error: load verify locs /etc/ssl/certs/, /etc/mail/ssl/sendmail-server.crt failed: 0 I hope someone can help me. I have put in a lot of time on this problem to no sucess Thanks for any help you can be. Brian Schramm = __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
masqmail problem
OK. I have changed the mailer from sendmail to masqmail. I had a problem with sendmail not working right on my machine. I tried exim and that did not work either. My needs are simple. I have one phone line dedicated as a modem line for my computer's internet access. I have had this type of a setup for years and never had any trouble with it. In the past year I had some hardware problems so I fixed them and got a fresh install of Debian Woody on the machine. It is update every week. To make a long story short, I have had a lot of trouble getting my email. So much so that I have set up the family on yahoo. I decided that I need to get my mail up on my machine so I installed masqmail. As soon as I did, fetchmail started pulling mail into my system! But I cannot get it to send now. I am figureing that I do not have a setting right but I have not found that setting yet. Can someone help with the settings? I figure that is all I need to change and I will have my email working again. Thank you in advance for any help rendered. Brian Schramm = __ Do You Yahoo!? LAUNCH - Your Yahoo! Music Experience http://launch.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Problems with mail
I keep having trouble reciving mail on my system. For some reason I have lost my dns acording to the mail program. For background info: Debian woody ppp 2.4.1 Here is the error I am getting all the time. Mar 20 14:09:56 schserv fetchmail[410]: Authorization failure on [EMAIL PROTECTED] Mar 20 14:09:56 schserv fetchmail[410]: IMAP connection to hosting.commercial-directory.com failed: host is unknown. Mar 20 14:09:57 schserv fetchmail[410]: Unknown login or authentication error on [EMAIL PROTECTED] Mar 20 14:09:57 schserv fetchmail[410]: socket error while fetching from coconutisland.com Mar 20 14:10:14 schserv fetchmail[410]: SMTP error: 451 4.1.8 Domain of sender address [EMAIL PROTECTED] does not resolve Mar 20 14:10:25 schserv fetchmail[410]: SMTP error: 451 4.1.8 Domain of sender address [EMAIL PROTECTED] does not resolve Mar 20 14:10:36 schserv fetchmail[410]: SMTP error: 451 4.1.8 Domain of sender address [EMAIL PROTECTED] does not resolve Mar 20 14:10:46 schserv fetchmail[410]: SMTP error: 451 4.1.8 Domain of sender address [EMAIL PROTECTED] does not resolve Mar 20 14:10:52 schserv fetchmail[410]: SMTP error: 451 4.1.8 Domain of sender address [EMAIL PROTECTED] does not resolve Mar 20 14:15:56 schserv fetchmail[410]: Authorization failure on [EMAIL PROTECTED] If you need more info please write to [EMAIL PROTECTED] Brian = __ Do You Yahoo!? Yahoo! Sports - live college hoops coverage http://sports.yahoo.com/
netcams
I have been given a 3com netcam and would like to use it on my Linux system. But I cannot find anything on the net about software for it. Has anyone got it working? Thanks for the help. Brian Schramm -- Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org
Re: Help with mailbox deletion
The permissions are set to rw at my user name and group name. The ls -l is this: -rw---1 bschramm bschramm 121180 Feb 14 2001 Busness_letters~ -rw---1 bschramm bschramm 361620 Jul 11 2001 Busness_new -rw---1 bschramm bschramm 311718 Jun 4 2001 Bussines -rw---1 bschramm bschramm 329140 Jun 12 2001 General This has allways worked before. Brian --- Jerome Acks Jr <[EMAIL PROTECTED]> wrote: > On Mon, Jan 21, 2002 at 10:08:22PM -0500, Brian > Schramm wrote: > > I am having a problem with my mailbox. I am using > sendmail with imap on > > my main email server. I can send, recieve and > read email on the > > system. But I cannot delete, copy or move the > messages anywhere. This > > includes the trash folder. I am using netscape 4 > for a email program. > > I have tried manually deleting the inbox and and > deleting the test > > folder. It will create a folder but will not move > or delete anything > > put there. > > Sounds like permission problems. What is ownership > and access modes of > folders and directory they are in? > -- > Jerome > > > -- > To UNSUBSCRIBE, email to > [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > = __ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/
Help with mailbox deletion
I am having a problem with my mailbox. I am using sendmail with imap on my main email server. I can send, recieve and read email on the system. But I cannot delete, copy or move the messages anywhere. This includes the trash folder. I am using netscape 4 for a email program. I have tried manually deleting the inbox and and deleting the test folder. It will create a folder but will not move or delete anything put there. Thanks for any help. Brian Schramm -- Brian Schramm [EMAIL PROTECTED] ICQ 104442754 AIM schrammbrian www.linuxexpert.org
Re: Problem with email
I have just the all: paranoid in the host deny file. I have nothing in the hosts.allow file. Brian --- Cam Ellison <[EMAIL PROTECTED]> wrote: > * Brian Schramm ([EMAIL PROTECTED]) wrote: > > I have my machine setup to work on the local > network > > in fact I put a all:all in the hosts.allow file > > > Please don't do that. Leave it blank. You may be > on dialup, which limits your exposure, but it is not > good practice, and it won't help. > > What is in your hosts.deny file? The Debian > standard is ALL:PARANOID, which should not cause a > problem. > > Cam > > > -- > Cam Ellison Ph.D. R.Psych. > From Roberts Creek on B.C.'s incomparable Sunshine > Coast > [EMAIL PROTECTED] > [EMAIL PROTECTED] > > > -- > To UNSUBSCRIBE, email to > [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > = __ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/
Re: Problem with email
This is a repeat reply because I do not know if I got this message out or not. I was haveing trouble getting yahoo mail to let me recieve from debian. See below for my reply: --- ben <[EMAIL PROTECTED]> wrote: > On Wednesday 16 January 2002 10:33 am, Brian Schramm > wrote: > > First my stats. > > Debian woody i386 from cd's bought from Cheapbytes > > After installing I then updated the system with > > dselect to the most current woody off the servers. > > I have a fixed domain name from yi.org. > > Plus I have a local network > > > > I have a problem with my mail working on imap and > > pop3. I thought that I had it set up ok since I > can > > ping the server as well as telnet to it on the > ports > > nessasary (143 & 110). When I try to get my mail > from > > any mail program I do not connect. I get the > error as > > if I typed in the wrong mail server name. I have > > tryed this with several installs of debian and > redhat > > and am having the same error. > > > > What have I done wrong? > > > > that's not really enough information to go on to be > able to help you. try > describing the topology of your local network and > how it's hooked to the web. I have a 10baset ethernet for my local network and it is tyed into the net with a 56K dial up modem on a normal phone line. The one machine is the gateway for the email (pop3 and imap), web and anything else that is not local. > > you say you're running both pop3 and imap > servers--is this on the one box? > > what do you mean by 'when i try to get my mail'--you > need to describe the > environment you're working with/in. I have tryed several email clients to get the mail from this box using pop3 or imap protocals. Every time I do I get an error saying that it cannot find my box or login failed. Right now I only have the server on this network because I am rebuilding the network from a hardware crash. > > the fact that you're consistently getting the same > error means that you're > consistently making the same mistake. perhaps a > better description of your > setup process might reveal what that is. I install the distrobution and setup my users. I then go into my modem setup and install the program that sets me up with my domain name on the internet. What that does is very similar to the way gnudip does it. My local network is set up like any other network that I have ever set up. I save the default gateway to be assined by the ppp system. That way it works for both networks. I also let my ppp connection assign the dns servers. I use the host file for any local computers. The mail server software (pop3 and imap) is installed as it is from the default install on debian package. The clients (kmail and netscape for two of them) are installed to use the opo3 or imap depending on what the software is compatable with. This is following the instructions for the client. I hope this will help you help me. Thanks for the help. Brian = = __ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/
Re: Problem with email
I have my machine setup to work on the local network in fact I put a all:all in the hosts.allow file So I am still not able to get my mail by pop or imap Brian --- Vittorio <[EMAIL PROTECTED]> wrote: > Thanks for the tips!! > > Vittorio > > Alan Chandler [debian-user] <17/01/02 21:36 +>: > > -BEGIN PGP SIGNED MESSAGE- > > Hash: SHA1 > > > > On Wednesday 16 January 2002 7:53 pm, Brian > Schramm wrote: > > > See below for my reply: > > > > > > > I have a problem with my mail working on > imap and > > > > > pop3. I thought that I had it set up ok > since I > > > > Just a thought - do your /etc/hosts.allow and > /etc/hosts.deny on the > > imap/ipop3 server allow your client machine to > make the connection? > > > > - -- > > > > Alan - [EMAIL PROTECTED] > > http://www.chandlerfamily.org.uk > > -BEGIN PGP SIGNATURE- > > Version: GnuPG v1.0.6 (GNU/Linux) > > Comment: For info see http://www.gnupg.org > > > > > iD8DBQE8R0P71mf3M5ZDr2kRAgptAKC599+kpqkCjkXw6W4Oh5ysqig9bgCgjoFe > > jloFhrGTVxuzgLgyRWR9EZE= > > =HbIT > > -END PGP SIGNATURE- > > > > > > -- > > To UNSUBSCRIBE, email to > [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > > > > > > > > -- > To UNSUBSCRIBE, email to > [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > = __ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/
Problems with kscreensaver
I am using kde 2.2.2 woody version. A lot of the screen savers do not work. Is this normal or is there something wrong with my install? Along the same line, the screensaver program crashes if I try to run it from the mainmenu (K-menu>preferences>screensaver) but it runs if I run it from the control center. Thanks for your help. Brian Schramm = __ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/
Re: Problem with email
See below for my reply: --- ben <[EMAIL PROTECTED]> wrote: > On Wednesday 16 January 2002 10:33 am, Brian Schramm > wrote: > > First my stats. > > Debian woody i386 from cd's bought from Cheapbytes > > After installing I then updated the system with > > dselect to the most current woody off the servers. > > I have a fixed domain name from yi.org. > > Plus I have a local network > > > > I have a problem with my mail working on imap and > > pop3. I thought that I had it set up ok since I > can > > ping the server as well as telnet to it on the > ports > > nessasary (143 & 110). When I try to get my mail > from > > any mail program I do not connect. I get the > error as > > if I typed in the wrong mail server name. I have > > tryed this with several installs of debian and > redhat > > and am having the same error. > > > > What have I done wrong? > > > > that's not really enough information to go on to be > able to help you. try > describing the topology of your local network and > how it's hooked to the web. I have a 10baset ethernet for my local network and it is tyed into the net with a 56K dial up modem on a normal phone line. The one machine is the gateway for the email (pop3 and imap), web and anything else that is not local. > > you say you're running both pop3 and imap > servers--is this on the one box? > > what do you mean by 'when i try to get my mail'--you > need to describe the > environment you're working with/in. I have tryed several email clients to get the mail from this box using pop3 or imap protocals. Every time I do I get an error saying that it cannot find my box or login failed. Right now I only have the server on this network because I am rebuilding the network from a hardware crash. > > the fact that you're consistently getting the same > error means that you're > consistently making the same mistake. perhaps a > better description of your > setup process might reveal what that is. I install the distrobution and setup my users. I then go into my modem setup and install the program that sets me up with my domain name on the internet. What that does is very similar to the way gnudip does it. My local network is set up like any other network that I have ever set up. I save the default gateway to be assined by the ppp system. That way it works for both networks. I also let my ppp connection assign the dns servers. I use the host file for any local computers. The mail server software (pop3 and imap) is installed as it is from the default install on debian package. The clients (kmail and netscape for two of them) are installed to use the opo3 or imap depending on what the software is compatable with. This is following the instructions for the client. I hope this will help you help me. Thanks for the help. Brian = __ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/
Problem with email
First my stats. Debian woody i386 from cd's bought from Cheapbytes After installing I then updated the system with dselect to the most current woody off the servers. I have a fixed domain name from yi.org. Plus I have a local network I have a problem with my mail working on imap and pop3. I thought that I had it set up ok since I can ping the server as well as telnet to it on the ports nessasary (143 & 110). When I try to get my mail from any mail program I do not connect. I get the error as if I typed in the wrong mail server name. I have tryed this with several installs of debian and redhat and am having the same error. What have I done wrong? Brian Schramm = __ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/
sudo and Debian (was ssh and Debian)
I get the same thing. I also run Sun's and other unix systems that do not have this problem. I figure it is a problem with Debian but I am not sure. Anyone got any ideas at all? Brian Date: Tue, 2 Oct 2001 16:26:33 -0400 From: dman <[EMAIL PROTECTED]> To: debian-user@lists.debian.org Subject: Re: ssh and debian Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Tue, Oct 02, 2001 at 01:21:19PM -0400, Brian Schramm wrote: | Sorry for teh confusion. I use ssh to log in and sudo to change to the | superuser account. I ment sudo and debian in my letter. Now here is my Ah, ok. | problem. I log into my remote machine by ssh and then change to the sudo | system from there. No matter what I have tried it never askes me for a | password. I have had this happen ever since I have used debian and I have | never had it do that for me on any other system. It does not matter if I | am loged into the local console or a remote console. Here is my sudoers | file: | | # sudoers file. | # | # This file MUST be edited with the 'visudo' command as root. | # | # See the man page for details on how to write a sudoers file. | # | | # Host alias specification | | # User alias specification | | # Cmnd alias specification | | # User privilege specification | rootALL=(ALL) ALL | bschrammALL=(ALL) ALL | | This file works in other systems so I am not quite sure why it does not | work as expected here. It looks to me like that would require your password ... however a quick test on my debian box shows that it doesn't. Some snippets from 'man sudoers' that seem relevant : The reserved word ALL is a built in alias that always causes a match to succeed. It can be used wherever one might otherwise use a Cmnd_Alias, User_Alias, Runas_Alias, or Host_Alias. You should not try to define your own alias called ALL as the built in alias will be used in preference to your own. Please note that using ALL can be dangerous since in a command context, it allows the user to run any command on the system. - The User specification is the part that actually determines who may run what. root ALL = (ALL) ALL %wheel ALL = (ALL) ALL We let root and any user in group wheel run any command on any host as any user. FULLTIMERS ALL = NOPASSWD: ALL Full time sysadmins (millert, mikef, and dowdy) may run any command on any host without authenticating themselves. PARTTIMERS ALL = ALL Part time sysadmins (bostley, jwfox, and crawl) may run any command on any host but they must authenticate themselves first (since the entry lacks the NOPASSWD tag). Hmm, even using the PASSWD: option I still don't have to enter my password. I don't know why. -D -- Brian Schramm 919-871-6466 [EMAIL PROTECTED]
re: ssh and debian
Sorry for teh confusion. I use ssh to log in and sudo to change to the superuser account. I ment sudo and debian in my letter. Now here is my problem. I log into my remote machine by ssh and then change to the sudo system from there. No matter what I have tried it never askes me for a password. I have had this happen ever since I have used debian and I have never had it do that for me on any other system. It does not matter if I am loged into the local console or a remote console. Here is my sudoers file: # sudoers file. # # This file MUST be edited with the 'visudo' command as root. # # See the man page for details on how to write a sudoers file. # # Host alias specification # User alias specification # Cmnd alias specification # User privilege specification rootALL=(ALL) ALL bschrammALL=(ALL) ALL This file works in other systems so I am not quite sure why it does not work as expected here. Thanks Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org
ssh and debian
For some reason my debian box never propts me for a ssh password when loging into a sudo session. Is there some setting I need to do to tell it to ask me? Thanks -- Brian Schramm 919-871-6466 [EMAIL PROTECTED]
xlib problem
I am still trying to upgrade from potato to woody. With a modem this is a panfull process at best. Here it is 4 days latter and now I cannot get anywhere with it. Here is the error message that I get. Moving old app-defaults file XmAddressBook to /etc/X11/app-defaults/XmAddressBook.xlibs-old. Moving old app-defaults file XRn to /etc/X11/app-defaults/XRn.xlibs-old. Moving old app-defaults file Atmidi to /etc/X11/app-defaults/Atmidi.xlibs-old. Unpacking replacement xlibs ... dpkg: error processing /var/cache/apt/archives/xlibs_4.1.0-6_i386.deb (--unpack): trying to overwrite `/usr/X11R6/include/X11/pixmaps/mouse.xpm', which is also in package qcad dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/xlibs_4.1.0-6_i386.deb Sub-process /usr/bin/dpkg returned an error code (1) E: Sub-process /usr/bin/dpkg returned an error code (1) schserv:~# Please help. Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org
Logcheck_1.1.1-9_i386.deb problems
I am getting the following error in trying to install logcheck on my unstable debian system. Can someone tell me why? Selecting previously deselected package logcheck. (Reading database ... 110847 files and directories currently installed.) Unpacking logcheck (from .../logcheck_1.1.1-9_i386.deb) ... dpkg: error processing /var/cache/apt/archives/logcheck_1.1.1-9_i386.deb (--unpack): trying to overwrite `/etc/logcheck/ignore.d.paranoid/sendmail', which is also in package sendmail Errors were encountered while processing: /var/cache/apt/archives/logcheck_1.1.1-9_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Thanks. Brian -- Brian Schramm 919-871-6466 [EMAIL PROTECTED]
Re: Sound revisited
Thanks. That worked. Now I will try this tool at home and see if I can get sound on that machine. Brian On Wednesday 05 September 2001 11:54 am, Timeboy wrote: > On 2001.09.05 16:09 Brian Schramm wrote: > > OK, I know that this cannot be this hard. I have two machines that are > > running Linux and I cannot get sound to work on ether of them. The one > > is a Dell optiplex gx110 running unstable with kernel 2.4.7 The sound > > moduales do not load at all. Is there a place I can go to look for info > > on how to get this to work? I tryed looking up under the archives in the > > mailing list but I could not find anything. > > you could use modconf. Install modconf if not installed and type: > > #modconf > > Then you can search for the needed modules and install them with this tool. > > If this won't help you: You could download the kernel sources. This is not > a very good idea if you don't plan to compile a kernel cause kernel sources > have more then 20 MB. But in the sourcetree of kernel sources there is a > directory named Documentation. On this place are all docs for kernel and > his modules. > > If you tell me which sound cards you have i could look into my kernel > sources to find out which modules you need to install. > > Timo -- Brian Schramm 919-871-6466 [EMAIL PROTECTED]
Sound revisited
OK, I know that this cannot be this hard. I have two machines that are running Linux and I cannot get sound to work on ether of them. The one is a Dell optiplex gx110 running unstable with kernel 2.4.7 The sound moduales do not load at all. Is there a place I can go to look for info on how to get this to work? I tryed looking up under the archives in the mailing list but I could not find anything. Thanks. Brian -- Brian Schramm 919-871-6466 [EMAIL PROTECTED]
Just a question
Is there a way that I can take a passwd file and compare the full name data in it to the email ldap server and give a a list of what it finds and what it misses? I am doing this manually but with the number of users that there are involved it is going to be really time consuming. I know this may not be the best place to post this but it is the only group that I know that may have the answer. Thanks for your time -- Brian Schramm 919-871-6466 [EMAIL PROTECTED]
Re: Cups after upgrade
Acording to my package list, that is what I am running too. It is the same version as you. Brian On Monday 27 August 2001 01:46 pm, Christopher S. Swingley wrote: > Brian, > > > I just upgraded from woody to unstable (yes there is a difference) and > > now I cannot print with cupsys-bsd utilities. > > You might also make sure that all the cups binaries and libraries are > the same version. At some point in the past I managed to get 1.1.9 > cupsys-* packages, but I still had an older libcupsys package. Right > now I've got: > > ii cupsys-bsd 1.1.9-1.1 BSD comman > ii cupsys-client 1.1.9-1.1 client programs > ii libcupsys2 1.1.9-1.1 libs > > on my client machine and it works. My server also has the cupsys > package. > > Chris -- Brian Schramm 919-871-6466 [EMAIL PROTECTED]
Cups after upgrade
I just upgraded from woody to unstable (yes there is a difference) and now I cannot print with cupsys-bsd utilities. I get the error of lpr: unable to print file: client-error-not-found I can go into the cups admin interface and print a test page. Cups showes the printer installed and running idle. Everything looks good that I can see. I just cannot print. Any ideas? Thanks Brian -- Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org
Kmail questions
I just upgraded to kde 2.2 with kmail 1.3.1 on unstable. kmail looks nice. Thanks to everyone that worked on it. When I type an address is there a way to have it complete the address when it finds it fro the keyboard? I hate moveing my hand off he keyboard just to click on a button. Is there a way to have it read the ldap database automaticly like netscape does? The co. that I work for stores all the email names in ldap and we useually configure the netscape address book to see this and do a search on it when we are typeing in an address. Thanks. Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org
rmagic and woody
I am using analog and rmagic to run web stats here. I just upgraded to woody from potato. Now I cannot get rmagic to install. Here is the error I get: [EMAIL PROTECTED]:~/bin# apt-get install rmagic Reading Package Lists... Done Building Dependency Tree... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: Sorry, but the following packages have unmet dependencies: rmagic: Depends: libgd-perl (>= 1.27) but 1.18-2.1 is to be installed Depends: libgd-graph-perl (>= 1.24) but it is not going to be installed Depends: libgd-graph3d-perl (>= 0.40) but it is not going to be installed E: Sorry, broken packages How do I fix this? Thanks. Brian
Potato to Woody
OK. I just read a message about the same problem that I am having. I looked at the lib directory and found out that the sym link was pointing to a file not there. So, I changed that. It let me get past the point of it complaining about the perl library but now I at a missing file. /usr/bin/dkpg-preconfigure is missing. Any ideas? Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org
Potato to woody problem
I changed the references in my apt/sources.list to point to woody. I then did a apt-get update apt-get install apt-utils debconf apt-get dist-upgrade When I did the apt-get install apt-utils debconf it told me to type Yes, do as I say! to upgrade the pearl system. I did that and now I keep getting a perl: error while loading shared libraries: libdb.so.3 How do I get by this? Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org
Sound problems
I am running Potato that was moved from Progeny. I am haveing a very bad sound problem. At this time sound does not work at all. Here is the details: Dell Opliplex gx 110 computer stock. Intel 810 sound card in it KDE desktop Here is a search for alsa in the apt-cache: [EMAIL PROTECTED]:~# apt-cache search alsa alsaconf - ALSA configurator alsalib0.3.0 - dummy package to fix previous broken versions alsaplayer - PCM player designed for ALSA alsaplayer-alsa - PCM player designed for ALSA alsaplayer-esd - PCM player designed for ALSA alsaplayer-oss - PCM player designed for ALSA alsautils - Advanced Linux Sound Architecture (utils) aumix - Simple text-based mixer control program esound-alsa - Enlightened Sound Daemon (ALSA) - Support binaries gamix - Graphical mixer for ALSA using gtk+. libasound0.4 - Advanced Linux Sound Architecture (libraries) libasound0.4-dev - Advanced Linux Sound Architecture (development) libesd-alsa0 - Enlightened Sound Daemon (ALSA) - Shared libraries libesd-alsa0-dev - Enlightened Sound Daemon (ALSA) - Development files (libc6) libfreeamp-alsa - ALSA plugins for FreeAmp libmikmod1 - A portable sound library libmikmod1-dev - A portable sound library - development files libmikmod2 - A portable sound library libmikmod2-dev - A portable sound library - development files liby-dev - Y Sound Server Library Header Files liby2 - Y Sound Server Library vkeybd - Virtual Keyboard program xamixer - Graphical mixer for ALSA yiff-config - Y Sound Server X11 Configuration yiff-server - Y Sound Server alsa-base - ALSA driver common files alsa-headers - ALSA driver header files alsa-source - ALSA driver source libarts-alsa - aRts Sound system libasound1 - Advanced Linux Sound Architecture (libraries) libasound1-dev - Advanced Linux Sound Architecture (development) libkmid-alsa - aRts Sound system (midi support libraries with alsa) alsa-utils - Advanced Linux Sound Architecture (utils) balsa - GNOME email client I have tryed sndconfig, alsa and manually working with sound moduals. No luck yet I am at a loss at this point. Can anyone tell me what is wrong? Thanks Brian Schramm
kmail
OK, I have heard several times that kmail uses imap. Yet I cannot find a way to set it up for that. Can anyone tell me how? All I have for options are local and pop accounts. I would like to use kmail to have full support for imap including server side mail folders. Any chance of that working? Thanks. Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org
Re: Repeat: Problem with Postgresql database
I tryed that. I can get in by the postgres user but cannot create a user from there. It does not give me an error message but does not create the user eather. Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org On Fri, 13 Jul 2001, will trillich wrote: > On Wed, Jul 11, 2001 at 09:04:01PM -0400, Brian Schramm wrote: > > I just upgraded from potato to Progeny Debian. The upgrade went fairly > > smooth (thanks Progeny) and the system seems to be working well. My > > problem is that the postgresql database says that my username does not > > exist in the pg_shadow file any more. I thought that this was a problem > > that > > the users did not transfer so I created another user with the create user > > command. It still tells me that the pg_shadow file does not contain the > > user. Any ideas? > > can you get in via the postgres superuser? (su to root, then su > to postgres). maybe try createuser from the postgres account. > > just guessing... > > -- > DEBIAN NEWBIE TIP #21 from Will Trillich <[EMAIL PROTECTED]> > : > Looking to configure your Debian NETWORK SETTINGS? Look at the > file /etc/network/interfaces (try "man interfaces" for more > info). Then "ifup -a" to reload your settings, and "ifconfig" to > display them. (Also check out "apt-get install ipmasq"!) > > Also see http://newbieDoc.sourceForge.net/ ... > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >
Repeat: Problem with Postgresql database
I just upgraded from potato to Progeny Debian. The upgrade went fairly smooth (thanks Progeny) and the system seems to be working well. My problem is that the postgresql database says that my username does not exist in the pg_shadow file any more. I thought that this was a problem that the users did not transfer so I created another user with the create user command. It still tells me that the pg_shadow file does not contain the user. Any ideas? Thanks Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org
Trouble with lists?
I subscribe to the digest version of this list and I have not goten any in a few days. Is anyone else having trouble? Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org
Problem with postgres database
I just upgraded from potato to Progeny Debian. The upgrade went fairly smooth (thanks Progeny) and the system seems to be working well. My problem is that the postgres database says that my username does not exist in the pg_shadow file any more. I thought that this was a problem that the users did not transfer so I created another user with the create user command. It still tells me that the pg_shadow file does not contain the user. Any ideas? Thanks Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org
Re: How do I clear out a list
I did a apt-get update. Acually I followed the instructions on www.progeny.com web site. For your instructions, would that install them or remove them? Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org On Fri, 6 Jul 2001, Joost Kooij wrote: > On Thu, Jul 05, 2001 at 09:30:20PM -0400, Brian Schramm wrote: > > I wanted to remove all the ximian files from my system since they are > > giving me a lot of problems. I also wanted to change to Progeny since I > > have a vidio card that works better under xfree 4.x then xfree 3.x. So, I > > followed the instructions on how to do this. > > > > My problem is that the ximian files are still listed in my dselect list > > even though I have taken the site out of my sources.list file. How do I > > get rid of them so I can install the ones from progeny and debian sites? > > Have you run update from dselect? If so, then they are probably still > listed in dselect, because the packages from ximian are still installed > on your system. The versions of these packages in the debian archive > are lower I guess, so they are not upgraded. > > You can try typing this into a root shell: > > for pkg in $( COLUMNS=200 dpkg -l "*" | awk '/^ii.*ximian/ {print $2}' ) > do >apt-get --reinstall install $pkg > done > > Try: > > COLUMNS=200 dpkg -l "*" | grep ximian > > to see if that fixed it. > Cheers, > > > Joost >
How do I clear out a list
I wanted to remove all the ximian files from my system since they are giving me a lot of problems. I also wanted to change to Progeny since I have a vidio card that works better under xfree 4.x then xfree 3.x. So, I followed the instructions on how to do this. My problem is that the ximian files are still listed in my dselect list even though I have taken the site out of my sources.list file. How do I get rid of them so I can install the ones from progeny and debian sites? Thanks for any help. Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org
RE: Route problem
This worked for me. Thanks. I did not know I had to type the full line like it was put into the routing table. Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org On Wed, 13 Jun 2001, Ian Perry wrote: > > try > route del -host 192.168.0.100 reject > > I just checked it out...it worked here > > -Original Message- > From: Anthony J. Breeds-Taurima [mailto:[EMAIL PROTECTED] > Sent: Wednesday, June 13, 2001 12:59 PM > To: Ian Perry > Cc: 'Brian Schramm'; debian-user@lists.debian.org > Subject: RE: Route problem > > > On Wed, 13 Jun 2001, Ian Perry wrote: > > > route del ipnumber > > or are you talking about the ipfwadm or ipchains ? > > Hmmm didn't work here: > ~# route > Kernel IP routing table > Destination Gateway Genmask Flags Metric RefUse > Iface > 192.168.0.12* 255.255.255.255 UH0 00 eth0 > 192.168.0.0 * 255.255.255.0 U 0 00 eth0 > 127.0.0.0 * 255.0.0.0 U 0 00 lo > default gw 0.0.0.0 UG0 00 eth0 > ~# route add -host 192.168.0.100 reject #no machine on this IP. > ~# route > Kernel IP routing table > Destination Gateway Genmask Flags Metric RefUse > Iface > 192.168.0.100 - 255.255.255.255 !H0 -0 - > 192.168.0.12* 255.255.255.255 UH0 00 eth0 > 192.168.0.0 * 255.255.255.0 U 0 00 eth0 > 127.0.0.0 * 255.0.0.0 U 0 00 lo > default gw 0.0.0.0 UG0 00 eth0 > ~# route -v del -host 192.168.0.100 > SIOCDELRT: No such process > ~# route > Kernel IP routing table > Destination Gateway Genmask Flags Metric RefUse > Iface > 192.168.0.100 - 255.255.255.255 !H0 -0 - > 192.168.0.12* 255.255.255.255 UH0 00 eth0 > 192.168.0.0 * 255.255.255.0 U 0 00 eth0 > 127.0.0.0 * 255.0.0.0 U 0 00 lo > default gw 0.0.0.0 UG0 00 eth0 > > > I usually use ipchains/iptables because I couldn't workout how to remove the > reject rule. > > Yours Tony. > > /* > * "The significant problems we face cannot be solved at the > * same level of thinking we were at when we created them." > * --Albert Einstein > */ > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] >
Route problem
Is there a way to remove a route from the route table that is set up to reject that ip address? I have tried on several machines with no luck. I am tired of rebooting to clear it. Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org
Re: I need a windows-linux solution
OK I need to make it a little more clear. I need to access these files in realtime. They are used for outlook and other programs. I could use a routine to update the local files but the size and time does not allow for that. I need to be able to access it like a norma drive. Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org On Sun, 3 Jun 2001, Sebastian Becerra wrote: > Have you tried. .. FTP?? > > Check out Proftpd. (Although just about any server you pick will end up > having a huge security hole in the future; not much you can do about it > besides running a reasonably recent release.) > > - Original Message - > From: "Brian Schramm" <[EMAIL PROTECTED]> > To: "NCSA Dicussion" <[EMAIL PROTECTED]>; "L.U.S.T List" > <[EMAIL PROTECTED]>; > Sent: Saturday, June 02, 2001 10:06 PM > Subject: I need a windows-linux solution > > > > I have a Linux machine on a cable modem. That server has a lot of files > > that I need to get to from a Windows machine in another location that is > > on a dsl line. I have tried samba but it is aparently blocked at the > > cable co. I think NFS is open but there is no nfs client that I have > > gotten to work on windows yet I have pcnfs installed on my Debian server > > and my local 95 machine does not attach to it. I have tried ice-nfs and > > omni for client software. > > > > Is there a way to do this? Is there a problem in doing this? I am at my > > wits end. > > > > Please help. > > > > Brian > > > > Brian Schramm > > [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian > > www.linuxexpert.org > > > > > > > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > > > >
I need a windows-linux solution
I have a Linux machine on a cable modem. That server has a lot of files that I need to get to from a Windows machine in another location that is on a dsl line. I have tried samba but it is aparently blocked at the cable co. I think NFS is open but there is no nfs client that I have gotten to work on windows yet I have pcnfs installed on my Debian server and my local 95 machine does not attach to it. I have tried ice-nfs and omni for client software. Is there a way to do this? Is there a problem in doing this? I am at my wits end. Please help. Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org
Re: Shareing nfs with windows problem
Can you give me an idea on how to do that by nis? Maybe that would be better anyways. The nfs client that I am using on Windows has that as a choice. Brian Andrew D Dixon <[EMAIL PROTECTED]> said: > Brian Schramm wrote: > > > > Has anyone gotten the pcnfsd system to work? I am trying to share a nfs mount > > with windows (samba will not work in this case) and am haveing trouble with > > pcnfsd. It will not authorize the users. > > > > > I've never used pcnfsd but even the regular old nfsd is picky about what > users can access an nfs file. I use nis with nfs to avoid user > authorization problems. > > I bet Windows doesn't do NIS, hugh? Maybe a program like Hummingbird > would get you around this problem? > > sory I couldn't be more helpful, > Andy > -- Brian Schramm http://www.linuxexpert.orgICQ 104442754 AIM schrammbrian [EMAIL PROTECTED]
Shareing nfs with windows problem
Has anyone gotten the pcnfsd system to work? I am trying to share a nfs mount with windows (samba will not work in this case) and am haveing trouble with pcnfsd. It will not authorize the users. Thanks for any help. Brian -- Brian Schramm http://www.linuxexpert.orgICQ 104442754 AIM schrammbrian [EMAIL PROTECTED]
Need help in building my own boot disks
I am running potato with kernel 2.2.19 on it. I want to build a custom kernel that will allow me to boot a new machine with the new netgear drivers in it. I have tryed building the drivers on my machine and just copying them over but that does not work. I am willing to build my own disks but when I loaded the boot disks package and read the readme file, I tryed doing what it said and failed. a make check gives back a lot of errors and a make release dies too. Please help. I need to get this machine up this weekend. Brian Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org
Re: Problem with netgear card
gcc -DMODULE -Wall -Wstrict-prototypes -O6 -c natsemi.c from the bottom of the natsemi.c file. My file placement is standard for the kernel. I have a link to the 2.2.19 source directory by the name of linux. I have the drivers stored in the /usr/src/module directory. I hope this helps. Brian "Noah L. Meyerhans" <[EMAIL PROTECTED]> said: > On Sat, May 19, 2001 at 01:28:45AM -, Brian Schramm wrote: > > I never ran mrproper. The last time I did that I had trouble bringing > > everything back to a good compile so I don't do that any more. Admittedly, > > that was a long time ago and many kernels back. > > > > I have looked in the directory that you said and I have a modversions.h file. > > So, I do not know what I can do about this problem. > > In that case you must just be telling the compiler to look in the wrong > place for kernel include files. Post the command line you're using to > compile the natsemi.c driver. > > noah > > -- > ___ > | Web: http://web.morgul.net/~frodo/ > | PGP Public Key: http://web.morgul.net/~frodo/mail.html > > -- Brian Schramm http://www.linuxexpert.orgICQ 104442754 AIM schrammbrian [EMAIL PROTECTED]
Re: Problem with netgear card
Kernel source is not part of the defalt load for Debian. You have to choose that package after you have the system installed. Brian Michael Mueller <[EMAIL PROTECTED]> said: > Here's a newbie question about the instructions below: > > If I load Potato from scratch, will there be a kernel > source directory that has a modversions.h file in it? > > Mike > > > --- "Noah L. Meyerhans" <[EMAIL PROTECTED]> wrote: > > On Fri, May 18, 2001 at 03:24:17PM -0400, Brian > > Schramm wrote: > > > > > > Any other ideas? > > > > > > > The kernel needs to be configured (i.e. make config > > || make menuconfig > > || make xconfig must have been run). The > > modversions.h file you > > mentioned (in a long list of other garbage, all of > > which I chopped > > out) is automatically generated by the configuration > > process. You need > > to configure the kernel precisely the way it was > > configured when you > > built it. It's generally a good idea to keep a copy > > of the .config > > around to make your life easier in cases like this. > > > > noah > > > > -- > > > > > ___ > > | Web: http://web.morgul.net/~frodo/ > > | PGP Public Key: > > http://web.morgul.net/~frodo/mail.html > > > > > > > ATTACHMENT part 2 application/pgp-signature > > > > = > > > __ > Do You Yahoo!? > Yahoo! Auctions - buy the things you want at great prices > http://auctions.yahoo.com/ > -- Brian Schramm http://www.linuxexpert.orgICQ 104442754 AIM schrammbrian [EMAIL PROTECTED]
Re: Problem with netgear card
I never ran mrproper. The last time I did that I had trouble bringing everything back to a good compile so I don't do that any more. Admittedly, that was a long time ago and many kernels back. I have looked in the directory that you said and I have a modversions.h file. So, I do not know what I can do about this problem. Brian "Noah L. Meyerhans" <[EMAIL PROTECTED]> said: > On Fri, May 18, 2001 at 11:40:39PM -, Brian Schramm wrote: > > Ok I am lost. I installed this system that I am running with potato and > > 2.2.17. I then downloaded the kernel source for 2.2.19 and compiled it the > > way I need it for my current system. So, what is this about keeping the > > .config file and configuring it the same way that the kernel was configured? > > Maybe I am lost but I am not sure what that has to do with me compiling the > > extra drivers for the netgear card. Do you mean that I need to compile again > > to generate this file? > > OK, lets start by assuming you have the kernel source in /usr/src/linux/ > When you ran 'make config' (or menuconfig or xconfig, whatever) you > generated a file /usr/src/linux/.config and > /usr/src/linux/include/linux/modversions.h modversions.h is the key > file. When you ran 'make mrproper' you deleted both these files (and > whatever else was created by make config). > > So in order to create /usr/src/linux/include/linux/modversions.h, you > need to re-run make config. You don't need to re-compile the kernel at > all. > > What I recommend doing is saving a copy of /usr/src/linux/.config, so if > you ever do need to re-generate things like modversions.h in an > idendical configuration as before, you can just put the file in place > (/usr/src/linux/.config) and run 'make oldconfig'. > > noah > > -- > _______ > | Web: http://web.morgul.net/~frodo/ > | PGP Public Key: http://web.morgul.net/~frodo/mail.html > > -- Brian Schramm http://www.linuxexpert.orgICQ 104442754 AIM schrammbrian [EMAIL PROTECTED]
Re: Problem with netgear card
Ok I am lost. I installed this system that I am running with potato and 2.2.17. I then downloaded the kernel source for 2.2.19 and compiled it the way I need it for my current system. So, what is this about keeping the .config file and configuring it the same way that the kernel was configured? Maybe I am lost but I am not sure what that has to do with me compiling the extra drivers for the netgear card. Do you mean that I need to compile again to generate this file? Thanks for the help. Brian "Noah L. Meyerhans" <[EMAIL PROTECTED]> said: > On Fri, May 18, 2001 at 03:24:17PM -0400, Brian Schramm wrote: > > > > Any other ideas? > > > > The kernel needs to be configured (i.e. make config || make menuconfig > || make xconfig must have been run). The modversions.h file you > mentioned (in a long list of other garbage, all of which I chopped > out) is automatically generated by the configuration process. You need > to configure the kernel precisely the way it was configured when you > built it. It's generally a good idea to keep a copy of the .config > around to make your life easier in cases like this. > > noah > > -- > ___ > | Web: http://web.morgul.net/~frodo/ > | PGP Public Key: http://web.morgul.net/~frodo/mail.html > > -- Brian Schramm http://www.linuxexpert.orgICQ 104442754 AIM schrammbrian [EMAIL PROTECTED]
Re: Problem with netgear card
OK, I am ccing the list on this. I do have the source installed. I installed the deb package for 2.2.19 and compiled the kernel for the machine that it is running on. I want to use that kernel also since that is the one that I am using for the new system too. So, I do not believe that the system is missing anything or else I would not be able to compile the kernel. Any other ideas? Brian Schramm [EMAIL PROTECTED]ICQ 104442754 AIM schrammbrian www.linuxexpert.org On Fri, 18 May 2001, Michael Mueller wrote: > Brian, > > Hmm. Too bad I didn't copy the group. SOemone else > may have a better answer than I am able to give. > > Judging from the output you show below, my guess is > that your machine is missing the kernel sources and > header files. (Yep, that's what it is. modversions.h > should exist in your /usr/src/linux/include/linux > directory. If you do not have this directory > structure, then you ust create it.) > > In a nutshell, here's what might get you compiling: > > get the kernel source for your kernel from > ftp.us.kernel.org. You want the version for your new > machine - not your working machine - in case they are > different (use "uname -a). Read up on how to compile > a kernel for more detail on installing the tarball on > your working machine (L. Doc. Proj.). You don't > actually need to compile the kernel. All you need to > do is unpack it in the right place with the right > procedure. Once you've got the kernel source > installed, then you can resume building your net > drivers. > > Feel free to continue this discussion on a private > thread. Put "MIKE!" in the subject line to get my > attention when I scan my email reader. > > Good luck. > Mike > > --- Brian Schramm <[EMAIL PROTECTED]> wrote: > > I cannot even get it to compile. The page tells me > > what to do but it does not > > work. Here is the error: > > [EMAIL PROTECTED]:/usr/src/modules# gcc -DMODULE -Wall > > -Wstrict-prototypes -O6 -c > > natsemi.c > > natsemi.c:103: linux/modversions.h: No such file or > > directory > > In file included from natsemi.c:125: > > kern_compat.h:42: linux/modversions.h: No such file > > or directory > > > > Can you help? > > > > Brian > > > > > > Michael Mueller <[EMAIL PROTECTED]> said: > > > > > OK , I had that problem too: new system and no > > > driver. > > > > > > Luckily you have another working system attached > > to > > > the Internet. > > > > > > 1. load new machine > > > 2. get netdrivers.tgx from scyld and build > > natsemi.o > > > (maybe pci-scan.o too) > > > 3. put driver .o files on floppy and mount on new > > > machine > > > 4. load .o files to /lib/modules/$(uname -r)/net > > > 5. configure > > > 6. reload > > > 7. enjoy > > > > > > Mike > > > --- Brian Schramm <[EMAIL PROTECTED]> > > wrote: > > > > OK, If I use my good Debian system to build this > > > > custom kernal, is there a way > > > > to get this to the box that only has the kernel > > on > > > > it? I am at the reboot of > > > > the install on this one and it is running 2.2.19 > > > > like my other machine. > > > > > > > > Brian > > > > > > > > Tomaas Ortega <[EMAIL PROTECTED]> said: > > > > > > > > > dont use the tulip driver as its only in use > > for > > > > the netgear fa310 > > > > > what you need to use is the src for the > > natsemi > > > > driver > > > > > its at > > > > > http://www.scyld.com/network/ethercard.html > > > > > > > > > > Tomaas Ortega > > > > > "Hey, does anybody else hear that giant > > sucking > > > > sound? That's my will to > > > > > live" > > > > > www.dematerialised.com - coming soon > > > > > www.dematerialised.com/zeitgeist/ > > > > > - Original Message - > > > > > From: "Brian Schramm" > > <[EMAIL PROTECTED]> > > > > > To: > > > > > Sent: Friday, May 18, 2001 12:48 PM > > > > > Subject: Problem with netgear card > > > > > > > > > > > > > > > > I have a new machine here with a netgear > > fa311 > > > > network card in it. I want > > > >
Re: Problem with netgear card
OK, If I use my good Debian system to build this custom kernal, is there a way to get this to the box that only has the kernel on it? I am at the reboot of the install on this one and it is running 2.2.19 like my other machine. Brian Tomaas Ortega <[EMAIL PROTECTED]> said: > dont use the tulip driver as its only in use for the netgear fa310 > what you need to use is the src for the natsemi driver > its at > http://www.scyld.com/network/ethercard.html > > Tomaas Ortega > "Hey, does anybody else hear that giant sucking sound? That's my will to > live" > www.dematerialised.com - coming soon > www.dematerialised.com/zeitgeist/ > - Original Message - > From: "Brian Schramm" <[EMAIL PROTECTED]> > To: > Sent: Friday, May 18, 2001 12:48 PM > Subject: Problem with netgear card > > > > I have a new machine here with a netgear fa311 network card in it. I want > to > > install Debian on it but the only drivers I can find are for Redhat. Has > > anyone gotten this card to work with Debian? > > > > Thanks > > > > Brian > > > > -- > > Brian Schramm > > http://www.linuxexpert.orgICQ 104442754 AIM schrammbrian > > [EMAIL PROTECTED] > > > > > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > > -- Brian Schramm http://www.linuxexpert.orgICQ 104442754 AIM schrammbrian [EMAIL PROTECTED]
Re: Problem with netgear card
Tryed, also I did not try any command paramiters. Brian John Griffiths <[EMAIL PROTECTED]> said: > At 02:48 AM 5/18/01 -0000, Brian Schramm wrote: > >I have a new machine here with a netgear fa311 network card in it. I want to > >install Debian on it but the only drivers I can find are for Redhat. Has > >anyone gotten this card to work with Debian? > > Use the tulip module > -- Brian Schramm http://www.linuxexpert.orgICQ 104442754 AIM schrammbrian [EMAIL PROTECTED]
Problem with netgear card
I have a new machine here with a netgear fa311 network card in it. I want to install Debian on it but the only drivers I can find are for Redhat. Has anyone gotten this card to work with Debian? Thanks Brian -- Brian Schramm http://www.linuxexpert.orgICQ 104442754 AIM schrammbrian [EMAIL PROTECTED]
Custom install disks
I need to install a system that does not have hardware support with the current boot disks for install. I have a kernel that will work on the machine on my debian potato machine here. I would like to know how to make a boot disk for install that will use that kernel. I installed the boot-floppy package but it is erroring when I run make check. I am not sure where I go from here. Thanks. Brian -- Brian Schramm http://www.linuxexpert.orgICQ 104442754 AIM schrammbrian [EMAIL PROTECTED]
HELP!
I am cofiguring a potato system for xfs-tt use and I cannot seem to get it to work. I run kde as a desktop as well as gnome. I cannot seem to get the fonts that I have told it about to list in eather desktop. Also, my Xterminals are not working. They stop at the point to request the fonts and the font server is not there. Any ideas? Brian Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Re: Problem with boot
What I am talking about is I built the kernel using make-kpkg kernel_image and that creates a deb file for me to install. The problem is that the lilo utility at the command prompt does not install right and the mkboot command from the command prompt does not make a bootable system for me but the programs that are used when you install the deb file that the above command makes works with no trouble. I would just like to know the commands that it uses so I can use it to do the changes when I make them instead of using the lilo or mkboot commands. I also wanted to point this problem out so we can get it fixed in the next reliese. Brian Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org On Thu, 28 Dec 2000, Art Edwards wrote: > I'm not clear about your question. I have rebuilt my kernel many times > and simply adjusted the lilo.conf file to include the new kernel image. > Are you rebuilding your kernel? If so, you can use > > make bzlilo > > to install it as default kernel. > -- > Arthur H. Edwards > 712 Valencia Dr. NE > Abq. NM 87108 > > (505) 256-0834 >
Problem with boot
I am running Potato. I have my kernel customised so I can write to my ide cd-rom. I also am running a 45G ide drive. If I install the kernel from the deb file and tell it to make a boot floppy and a lilo image everything works. But if I run lilo or try mkboot that does not work. Can anyone tell me what the difference is and how I can doplicate the job that the deb package does? I hate to re-install my kernel just because I needed to change something in lilo.conf. Thanks for the help. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
sendmail
I am running Debian Potato as up to date as possible. I stay online all the time through a 56K modem I have no trouble sending mail to anyone on the web except for Mindspring.com addresses. This just started recently (within the last 3 months). As soon as I send a mail message out to mindspring I get a message error bounce-back saying the address is not correct. But I can come to work and use the same address to send to with no problems. Here is the message log that gets written every time I send to mindspring. Dec 5 12:27:54 schmain sendmail[20319]: MAA20317: to=<[EMAIL PROTECTED]>, ctladdr=<[EMAIL PROTECTED] chrammfamily.net> (1000/1000), delay=00:00:03, xdelay=00:00:01, mailer=esmtp, relay=mx07.mindspring.com. [2 07.69.200.227], stat=Service unavailable Dec 5 12:27:55 schmain sendmail[20319]: MAA20317: MAA20319: DSN: Service unavailable Dec 5 12:27:55 schmain sendmail[20319]: MAA20319: to=<[EMAIL PROTECTED]>, delay=00:00:00, xdelay=00:00:00, mailer=local, stat=Sent Any help would be appreciated. Thanks. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
php3
I am running debian potato and am trying to get Twig 2.5.1 to run. For some reason even after going through and installing all the php3 modualls that are listed. The test still says it cannot access the imap and the pgsql database. Can anyone give me a hint on what to do from here? Thanks Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Email cleanup
I am running Debian Potato. I would like to go into the imap directories (~/mail) and remove old messages from each users system automaticly. I would of sorce like to do the same thing tolally automaticly. What can I use to do this? And how whould I do this? Thanks Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Problem with sound
I am running Potato with 2.2.17 for a kernel and KDE2 as my desktop. I have a cs4232 audio card. When I was running Slink I had no trouble running the audio card but when I upgraded, I have not been able to get it to work at all. If I cat a audio file out to /dev/audio the device is always busy. KDE2 does not drive it eather. I can still play audio CD's on it but that does not use the audio card. Can anyone tell me where to go from here? I have tryed different settings with no luck. Thanks. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
KDE2
I have a Debian Potato system fully up to date. OK. I read the reviews, I read the how install its. I installed the deb files. I cannot get any help on any kde aplication. There is no way that I can find to change the buttons arround on the windows. And there is no way to save the preferences on kword like tabs, indent, et. This is not the qualitly that I expected. Please tell me that there is something wrong with my install. And maybe how to fix it. Thanks Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
SCSI & SCSI emulation
I am running Potato with a IDE cdrom writer and I just got the Tekram DC390U2W SCSI card so I can get some SCSI devices to run. I have tried several drivers (Tekram web site) and biltin kernel drivers to get the card to work. I finally ended up with turning off the scsi emulation in the kernel to get it to work. Is there any way that both can exist with each other? I need both for what I am doing and rebooting is such a waist of time. Thanks for your help. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Serial/modem experts
OK, I would like to use a multiport serial board to connect more then 1 modem to my Linux machine to dial into the same provider to try to get faster net access. I know that equ will handle making the modems act as one but I do not know how good it is. This is about the only afordable solution that I have at this time so I need to know how it works in the reliability side of things. Is there a problem with wetting up the system for dyn. DNS? Is there a performance hit? Does it take a high powered machine or can it run good on a 486 firewall? Has anyone got a setup like this working well? Is there a modem max to it? Thanks. Brian Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Sun xterm revisited.
OK. I asked for help once before on this. I now need this fixed so I am back to it. I have Debian potato running at this time. I did use Debian slink working fine. I saved the etc and other configuration data off the old slink system on CD so I could use it to rebuild my system with. I have everything set up the way that I had it before and am still not able to get the Sun xterms working. I have set the tty0, tty2 and console on the xterm directory and the debian directory to be readwrite by the world. I still get the same error messages. I have run through all my thoughts on this and I have not gotten anywhere. I think the xfs is working but that is one of the error messages. Here is the error messages on the console of the bootp computer: fh_verify: dev/tty2 permission failure, acc=8, error=30 fh_verify: dev/console permission failure, acc=8, error=30 fh_verify: dev/tty0 permission failure, acc=8, error=30 Here is the error messages on the Xterm boot screen: pexextensioninit: couldn't open default pex font file roman_mcouldn't load xkb keymap, falling back to pre-xkb keymap xdmcp fatal error: manager unwilling host unwilling I hope this helps. Thanks for any help you can be. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Problem with mail
I am having some problems with my pine system and netscape mail system. I am running debian potato using the same home directory as I was using in slink. Pine: Pine keeps asking me to save my sent-mail folder into the aug backup folder every other time I start the program. I do that and it is fine for that run. Then the next time I start pine it tells me that I need to delete the aug folder to conserve disk space. I have 250 meg free on that drive so it should not be concerned with disk space. This is a continues pattern since the first of this month. Netscape: I cannot find any of my folders nor can I delete messages. Keep in mind that all the mail systems on my system works through imap. I also have one other user on the system and they are working fine in netscape. That is the only mail program that they use. Also, keep in mind that the users are local so there is no diference on the program end in that way. Please help. Thanks for any help you give. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
xfs servers
I am not able to get the xfs or xfs-xtt packages to work on Potato. They load but when I try to test them with "fslsfonts -server localhost:7100" it fails. Also, my xterm tells me it cannot get the fonts. What do I need to do in order to get this working? Thanks Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Problem with upgrade and xterm
OK, I had a working Debian slink system that allowed 2 Sun Xterminals to work off of it. I had a problem with my hd so I rebuilt the system from scratch not knowing what has been damaged (yes I am running with no backups). Since the Potato reliese is close to done, I desided to take this time and upgrade too. I have configured everything with the same paramiters (I think) and am using the same slxt package for the xterm system. For some reason it is not working. I get the normal boot messages on the xterm but it never loads the kdm login manager. Here is what is displayed on the main computer monitor at that time: fh_verify: dev/tty2 permission failure, acc=8, error=30 fh_verify: dev/console permission failure, acc=8, error=30 fh_verify: dev/tty0 permission failure, acc=8, error=30 I am at a loss. Can anyone help? Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Problem with potato
I just got through installing Potato on my HP Pavilion 133 computer with 80 meg of ram and a 8gig HD. When I come back to it from letting it sit idle for about 8 hours this is on the tty1 screen: DEBUG: Pages 0: Changed 0, Reapped 0, Empty 0, New 0; Tup 0: Vac 0, Keep/VTL 0/0, Crash 0, UnUsed 0, MinLen 0, MaxLen 0; Re-using: Free/Avail. Space 0/0; EndEmpty/Avail. Pages 0/0. Elapsed 0/0 sec. DEBUG: --Relation pg_rewrite-- DEBUG: Pages 3: Changed 0, Reapped 0, Empty 0, New 0; Tup 5: Vac 0, Keep/VTL 0/0, Crash 0, UnUsed 0, MinLen 2568, MaxLen 4609; Re-using: Free/Avail. Space 0/0; EndEmpty/Avail. Pages 0/0. Elapsed 0/0 sec. DEBUG: --Relation pg_listener-- DEBUG: Pages 0: Changed 0, Reapped 0, Empty 0, New 0; Tup 0: Vac 0, Keep/VTL 0/0, Crash 0, UnUsed 0, MinLen 0, MaxLen 0; Re-using: Free/Avail. Space 0/0; EndEmpty/Avail. Pages 0/0. Elapsed 0/0 sec. DEBUG: --Relation pg_description-- DEBUG: Pages 8: Changed 0, Reapped 0, Empty 0, New 0; Tup 1009: Vac 0, Keep/VTL 0/0, Crash 0, UnUsed 0, MinLen 44, MaxLen 115; Re-using: Free/Avail. Space 0/0; EndEmpty/Avail. Pages 0/0. Elapsed 0/0 sec. DEBUG: Index pg_description_objoid_index: Pages 5; Tuples 1009. Elapsed 0/0 sec. DEBUG: --Relation pg_user-- DEBUG: Pages 0: Changed 0, Reapped 0, Empty 0, New 0; Tup 0: Vac 0, Keep/VTL 0/0, Crash 0, UnUsed 0, MinLen 0, MaxLen 0; Re-using: Free/Avail. Space 0/0; EndEmpty/Avail. Pages 0/0. Elapsed 0/0 sec. DEBUG: --Relation pg_shadow-- DEBUG: Pages 1: Changed 0, Reapped 1, Empty 0, New 0; Tup 1: Vac 0, Keep/VTL 0/0, Crash 0, UnUsed 1, MinLen 80, MaxLen 80; Re-using: Free/Avail. Space 8096/0; EndEmpty/Avail. Pages 0/0. Elapsed 0/0 sec. DEBUG: --Relation pg_rules-- DEBUG: Pages 0: Changed 0, Reapped 0, Empty 0, New 0; Tup 0: Vac 0, Keep/VTL 0/0, Crash 0, UnUsed 0, MinLen 0, MaxLen 0; Re-using: Free/Avail. Space 0/0; EndEmpty/Avail. Pages 0/0. Elapsed 0/0 sec. DEBUG: --Relation pg_views-- DEBUG: Pages 0: Changed 0, Reapped 0, Empty 0, New 0; Tup 0: Vac 0, Keep/VTL 0/0, Crash 0, UnUsed 0, MinLen 0, MaxLen 0; Re-using: Free/Avail. Space 0/0; EndEmpty/Avail. Pages 0/0. Elapsed 0/0 sec. DEBUG: --Relation pg_tables-- DEBUG: Pages 0: Changed 0, Reapped 0, Empty 0, New 0; Tup 0: Vac 0, Keep/VTL 0/0, Crash 0, UnUsed 0, MinLen 0, MaxLen 0; Re-using: Free/Avail. Space 0/0; EndEmpty/Avail. Pages 0/0. Elapsed 0/0 sec. DEBUG: --Relation pg_indexes-- DEBUG: Pages 0: Changed 0, Reapped 0, Empty 0, New 0; Tup 0: Vac 0, Keep/VTL 0/0, Crash 0, UnUsed 0, MinLen 0, MaxLen 0; Re-using: Free/Avail. Space 0/0; EndEmpty/Avail. Pages 0/0. Elapsed 0/0 sec. I cannot find any errors in any log files and I do not see this come up while I am at the computer. Can anyone tel me what is going wrong? Thanks for the help Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Re: Monitoring program
That only works on normal floppies. If I have a boot floppy in there that was created a special way most systems will not mount them directly. But they will still boot from them. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org On Mon, 17 Jul 2000, Ron Rademaker wrote: > Why don't you try to mount the floppy or the cd, if it succeeds, there's a > disk / cdrom, if it fails, there not... > > Ron Rademaker > > On Mon, 17 Jul 2000, Brian Schramm wrote: > > > Is there a program that I can run in Linux that will tell me if there is a > > disk in a floppy or a cd in a cdrom drive on a machine? I control > > machines remotly and it would be nice to know if someone stuck a disk in a > > drive that has the potencial of booting off it so I know if a reboot will > > do what I want. > > > > Brian > > > > Brian Schramm > > [EMAIL PROTECTED] > > www.linuxexpert.org > > > > > > > > > > -- > > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > > >
Monitoring program
Is there a program that I can run in Linux that will tell me if there is a disk in a floppy or a cd in a cdrom drive on a machine? I control machines remotly and it would be nice to know if someone stuck a disk in a drive that has the potencial of booting off it so I know if a reboot will do what I want. Brian Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
2gig file
OK. I am dealing with a 2gig file size limit on Linux. I have been reading up on this all day to very little luck as to how to fix it. If I recomend someone to go to debian for an upgrade will this fix it? I am after any fix I can get and at this time changing dist. is just as good for me as anything else. Please someone help me see the lite on this. Thanks Brian -- Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Help with afbackup
I would like to use afbackup for my home network. Can anyone help with the commands? I have tried several and have not succeded yet. I have read all the docs I could find but none helped me out. Thanks for any help you can be. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
afbackup
I am wanting to use afbackup on my home network but I cannot seem to figure out the sintac of the command. I have tried several diferent commands to no avail now. I have read everything that I can find on it and I still cannot get it to work. Can someone give me a hint as to how to use this program? Thanks Brian Schramm [EMAIL PROTECTED]
Debian and SCSI tapes
I just got through installing Slink on a firewall I am setting up. I need to install the tape drive dev files on it. It is a SCSI drive so it should be nst0 but there is no driver like that in the dev directory. I do have the st modual loaded so I no it should work. How do I create the driver? Thanks. -- Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
ISDN and Sprint
I live in a Sprint controled area. They are offering a good deal on ISDN for my area but I cannot find out if Linux can handle the ISDN modem that they are offering with the service. The modem is: Eicon Diva t/a modem I am planing on setting the link up on a 486 running debian striped to use as a firewall and email server to my network. I will be using my other machines to run programs and GUI's on. 1. is this a standard modem? 2. can I use another modem? Like an internal? 3. Telco equipment can allways be more expencive then nessasary, can I buy this modem from another source? 4. Where can I find info on using this type of modem on Linux? 5. Any gotas on running a serial device for a 128K connection? Thanks in advance for helping. -- Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Re: Help with apachie
How do I point the htaccess file at it so it knows where to look for the password? Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org On Tue, 2 May 2000 [EMAIL PROTECTED] wrote: > Hi Brian, > I think your looking for this: > > [timberwolf:someuser:/$]> htpasswd > Usage: htpasswd [-c] passwordfile username > The -c flag creates a new file. > > ie.. htpasswd -c passwd.www username > > 1. Ensure it is NOT world readable. > 2. Make sure it is NOT in any web viewable directory. > > Enjoy! > > > -Robert MacQuarrie > > > > On Tue, 2 May 2000, Brian Schramm wrote: > >I am running Debian Slink. I would like to know how to re-create the > >htaccess password > >file that I deleted at som point. I know it is simple but I cannot find the > >info anywere > >including Apachie site. I ran htpasswd -b .password username password but > >that did not fix it. > > > >Can anyone help? > > > >Thanks. > > > >Brian Schramm > >[EMAIL PROTECTED] > >www.linuxexpert.org > >
Help with apachie
I am running Debian Slink. I would like to know how to re-create the htaccess password file that I deleted at som point. I know it is simple but I cannot find the info anywere including Apachie site. I ran htpasswd -b .password username password but that did not fix it. Can anyone help? Thanks. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Upgrade
Can anyone tell me a succesfull upgrade process from Slink to potato? I would like to use some software that requires the newer libs in potato and since it seems to be farely stable now I would like to start using it. Thanks for your help. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Netscape Plugins
OK I am useing Debian and Storm Linux with the standard packages. This is something that I have never gotten to work. I do have the plugger system installed and working right. But I have tried to install Flash and realplayer to no luck. My netscape 'about plugins' screen shows them installed and active but if I go to a site that uses that it tells me that I do not have it loaded. What am I doing wrong? I install them acording to the instructions and since my netscape sees them it whould work I would think. I figure that I am doing something wrong becasue I have never goten these two plugins to work in any Linux version with any version of Netscape. Any ideas? Thanks for any help. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Netware NDS
OK I like Debian. So I have been enjoying Strom Linux because of it's use of Debian. I know that I could go to Caldera and get what I want but I want to use a distribution that I am familur with. Does anyone know of a way to be a client on a NDS tree with Storm Linux or Debian? I remember Novel stating last year that they were going to support Linux. You cannot tell me it takes a year to make a client for Linux when there is one allready out there that only works on one Linux! So has anyone had any luck at doing this? Thanks for your help. -- Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Help with bootp
I am running Debian Slink fully updated. I am working on hooking up an Xterminal to the network. I am using the bootp server as nothing more then a nfs server so it does not have bind installed on it. I have my other machine maped as the firwall, bind, isp conection and home directory. I have a very basic configuration in the bootptab file and have tftpd and bootpd installed in the inet.conf file. For some reason I do not get the bootp system to even load when I boot the Xterminal. I have even gone as far as trying to load it from the command line to no success. No error messages (that I have found) have come up. I have configured other bootp servers before so I am not a real newbe to this. Can anyone point me in the right direction? Thanks for the help. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Help with bootp
I am having a problem with bootp on a fully updated Slink system. I try to access it from my Xterminal and my Xterminal says it is not getting any ip address. I look (ps aux) at the bootp server and it does not have bootpd running. So I try to start it from the command line and it does not start. I have gone through all the doc that I can find on Bootptab and have the most basic configuration in it so I figure that I am not doing anything wrong there. A quick scan through the log files and the daemon.log file has this in it: Jan 26 19:02:33 schramms bootpd[1241]: version 2.4.3 Jan 26 19:02:33 schramms bootpd[1242]: bind: Address already in use I am not sure why this is happening so does anyone have any ideas? thanks in advance. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Re: Navigator on slink
Thanks. I never thought of uninstalling the one that was installed. I was trying to update it. Brian Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org On Fri, 31 Dec 1999, Konrad Mierendorff wrote: > Brian Schramm wrote: > > I have downloaded the netscape communicator 4.7 and would like to know how > > I can install it by writing over the files that are there for 4.0. Ether > > that or have a deb package that will install it (prefered method). I need > > to do this today so can anyone help me out please? > > As this seems to be urgent I'm cc-ing to your personal account. > The package "netscape4" expects a file like > "communicator-v47-export.x86-unknown-linuxglibc2.0.tar.gz" in /tmp an > will install it when you install the package. If you installed your > communicator manually before you should delete all the old files > manually otherwise you should just remove the "netscape4" package and > install it again with the right communicator archive in /tmp. > The user specific data should not be affected. > > Hope it helps ... > > - Konrad Mierendorff >
Pine experts
I am having a problem trying to see my folders from my imap server in pine. I can see them in any other program that I use. Any ideas? Brian Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Navigator on slink
I have downloaded the netscape communicator 4.7 and would like to know how I can install it by writing over the files that are there for 4.0. Ether that or have a deb package that will install it (prefered method). I need to do this today so can anyone help me out please? Brian Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
RCP problem
OK, I have had this problem come up several times running different Linux distributions. I will be using NFS on a network and then all of a sudden I cannot mount any nfs drives and the logs say that rcp is not registered. 1. What causes this??? 2. What can I do to stop it?? 3. How do I fix the problem?? thanks for all your help. Brian Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Problem with named
I have a small network at home that I am running named on. I am also using yi.org's free dynamic dns for my internet name. I have had some trouble with my two machines on the prifate network. If I type nslookup I get the address of the machine back with a message saying it cannot find the name of that machine. I then go into it with localhost as the machine name. How can I fix this problem? Also, how can I add some machine records to the files. I have tried following the howto's and the readmes but I have had no luck yet. Thanks. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Install from plip
Has anyone had good luck with installing Debian from a plip conection to a desktop with a cd in it? I have a portable that has no cd and I would like to tie it to my desktop with a cd so I can install it that way. Thanks Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Cron jobs
OK I have looked at the cron and crontabs man pages to no avail. I would like to have a script that runs every 15 minutes only send me an email if it errors. The script exits out if certain conditions are good. I have it exiting with an exit command in a if statement. What I want is it to email me if it does not exit out prematurely. That way I can tell when I had to run the script so I can get a feal as to how often I end up with a problem. Any ideas? Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
/dev/audio
I have a problem with my speekers. They are in my monitor and every time I turn off my monitor they adjust the volume down to a point that is not herable. Is there a way that I can set up my profile or login script to adjust the volume to make it usable? Thanks. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Mirroring
Is there a way to mirror directories in a two way fasion? I want to update the directories that have older files in it with it's counterpart on another machine. This way my mini network will always act the same no mater what computer it is on and I can still have some private stuff for that computer only. Thanks for your help. Brian Schramm
notifying
I would like to set it up so I can send an email or some other message from a machine over the net or locally to another user to tell them to log in a check for messages. I know if they are on I can get their attention but a lot of times I would like to have my wife log in when I send her a message that I need to have her look at right away. The computer is usually in ear shot so the sound card or speeker can be trigured. I would love to have it run by an email address so I can do it from anywere. Any ideas?? Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Questions on X
I run Debian Slink 2.2 fully updated from debian.org. I have 2 machines setup on a network in my house. One of them has a lot of ram and HD space for use and the other is very limited in both. I have my home directory maped by nfs to the large machine. What I want to do is use xdm to act as a x terminal on the small machine so it will not be so slow in X when I want to use it. I am asuming that it is posible but I cannot figure out how to configure that. Can anyone help me? Thanks. Brian Schramm [EMAIL PROTECTED] www.linuxexpert.org
Re: Printer problem
I am sorry. I did not give a good explanation for the problem. I am talking security. I have the printer setup in the printcap file but it is not working because it cannot connect to it. The machine at the other end says it cannot allow the connection. I use to create a hosts.lpd file and that would work but I know that this version has some other file to edit. Brian >>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<< On 11/2/99, 10:07:03 AM, Ethan Benson <[EMAIL PROTECTED]> wrote regarding Re: Printer problem: > On 2/11/99 Brian Schramm wrote: > >I hope this gets to the list. I never saw my question post the last > >time. > > > >I am running Debian slink and I need to share my printers with my > >networked Debian slink workstations. I know that there is a file I > >need to modify in order to give permission to each computer to do > >this. I just forgot which one and what to put in it. > > > >Can someone please help me on this? > /etc/printcap man printcap > Best Regards, > Ethan Benson > To obtain my PGP key: http://www.alaska.net/~erbenson/pgp/
Printer problem
I hope this gets to the list. I never saw my question post the last time. I am running Debian slink and I need to share my printers with my networked Debian slink workstations. I know that there is a file I need to modify in order to give permission to each computer to do this. I just forgot which one and what to put in it. Can someone please help me on this? Thanks. Brian Schramm [EMAIL PROTECTED]
Printer sharing
I know I asked this question a long time ago but I need to ask again since my brain went dead and I cannot remember how to do it. I am running Slink and I need to share printers between two machines on my home network. How do I set it up? Brian Schramm
Re: Help with mounting a Xenix drive
I have set up the kernel with the Xenix driver as a module and have loaded it. On Sun, 25 Jul 1999, L.U.S.T List wrote: > -- > List: Linux User Support Team List > Sender: Matthew Dalton <[EMAIL PROTECTED]> > Subject: Re: Help with mounting a Xenix drive > Date: Mon, 26 Jul 1999 13:15:00 +1000 > -- > > Perhaps the kernel does not have Xenix drive fs support compiled in. Try > recompiling the kernel with Xenix fs support. > > Brian Schramm wrote: > > > > I am upgrading a Xenix computer with Linux. I have seen in the mount that I > > can mount this drive and I would like to do that so I can copy the data off > > the > > drive. But it does not work. I am just typing: > > > > insmod sysv > > mount -t sysv /dev/hdd4 /mnt > > > > This should work to my knowledge but it errors saying that it cannot read > > the > > superblock. > > > > I am using debian slink and redhat 5.2. I have access to a SCO machine but > > I > > would have to re-write a drive table on it and that might overwrite the data > > (according to their WEB site.). > > > > Please help. > > > > -- > > Brian Schramm > > [EMAIL PROTECTED] > > > > -- > > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null -- Brian Schramm [EMAIL PROTECTED]
Help with mounting a Xenix drive
I am upgrading a Xenix computer with Linux. I have seen in the mount that I can mount this drive and I would like to do that so I can copy the data off the drive. But it does not work. I am just typing: insmod sysv mount -t sysv /dev/hdd4 /mnt This should work to my knowledge but it errors saying that it cannot read the superblock. I am using debian slink and redhat 5.2. I have access to a SCO machine but I would have to re-write a drive table on it and that might overwrite the data (according to their WEB site.). Please help. -- Brian Schramm [EMAIL PROTECTED]
PIM's
Ok. maybe this is asking for a lot but I like to use my equipment until it no longer runs! I run Debian Linux for all my machines and use the KDE desktop system for my address book and schedualer. My problem is I want to use my portable for this type of setup too. But it is an older unit that X will never run on. 1. I am not afraid of the command line. I also do not mind writing small converting utilities for my own convenience. 2. I want software that is compatable with a GUI unit too. I will not mind changing software on both ends if it gives me this type of compatability. 3. I cannot garintee that I will be comunicating with both computers by a high speed link so I do not want to transfer large somes of date back and forth for updating. Any ideas? -- Brian Schramm [EMAIL PROTECTED]
Sendmail-anything else
I am trying to learn sendmail but it is not working the way I am expecting or wanting it to. I have tried everything that I can think of to no avail. Maybe someone can tell me why or maybe I should try something else. I am running Debian Slink with sendmail running and bind working. I use multiple mailboxes for my family. Each member has a login account on the Linux machine. Each member has a permanate forwarding e-mail box on the net so when I change ISP's I do not have to worry about changing e-mail addresses. Now what I want is sendmail (read any one like exim, send, et.) to always re-write the from address to the forwarding e-mail address for that user. I want to use any client program that I want for the mail program. Like I like StarOffice for my personal mail and ishmail for my work mail. My wife likes Netscape for hers. All these programs access the Linux machine for all e-mail for the user. So my local sendmail sends and receives my mail. I also need to have a flexible alias system so I can have all accounts receive mail from one address and they get the private mail from the other accounts no matter what the name is on the ISP side. The mail pull from the ISP is done through fetchmail at the root level so I only have one configuration file. Is anyone running a system like this? Can anyone help me get it set up? I have tried so many things that this letter would be way too long for anyone to read if I listed them all here. I am willing to take any suggestions that anyone has to offer. Even trying something else as long as someone has an idea as to how this configuration would work. Thanks. Brian Schramm -- Brian Schramm [EMAIL PROTECTED]
Staroffice mail
OK. I have Staroffice mail working to my local machine. My problem is intermetently I am having problem connecting to my machine. Everything is set to localhost for a server name. Bind is set up with localhost in it's table (acording to the deb install). And it works 90% of the time. Since this is the only office package that I have that is fully inticrated so I can automate some of my tasks, I would realy like to have everything working well. My main problem is nothing shows up in the logs as an error. At least none of them that I have checked. So, if anyone would have a sugestion I would like to here it. I am running Debian 2.1 with KDE as a desktop. Thanks. -- Brian Schramm [EMAIL PROTECTED]
Re: Bind
On Tue, 06 Jul 1999, Martin Bialasinski wrote: > >> "Brian" == Brian Schramm <[EMAIL PROTECTED]> writes: > > Brian> I am using one machine to run Debian 2.1. I do not have a > Brian> network but I want bind to handle caching of DNS inquires. I > Brian> am doing this so I can use the sendmail genericstable and > Brian> virtualtable and convert my addresses to the ones I want to > Brian> have everyone use for replys. > > I don't know sendmail, but I doubt it is necessary to have a running > bind to do address rewriting. This is completely unrelated. > > Brian> My problem is now if I am not connected to the net, everything > Brian> stops when I send a message. I have not changed my sendmail > Brian> configuration yet to vurtual hosting so I cannot see where that > Brian> is the problem. > > Brian> I installed the bind package with no forwarding so it is in > Brian> caching setup. > > So where does your bind gets it's info, if you didn't specify > forwarders (= hosts to ask for entries it doesn't know = your ISP's > DNS servers)? It tries to ask the root servers. > I thought forwaders where for a local network. That is why I did not put any in. > I believe you have a misconception about the thing you want to setup > and solve. What should your bind cache, and where does it get this info > from? Where did you read about this bind <-> addressrewriting > connection? > I got this from the sendmail.org web site. It clames that you need it running in order to do vurtual hosts and address rerouting. I have tryed to do it without setting up a bind server and it totally ignores the address changes so I am adding the bind server to see if they are right. > Ciao, > Martin > > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null -- Brian Schramm [EMAIL PROTECTED]
Bind
I am using one machine to run Debian 2.1. I do not have a network but I want bind to handle caching of DNS inquires. I am doing this so I can use the sendmail genericstable and virtualtable and convert my addresses to the ones I want to have everyone use for replys. My problem is now if I am not connected to the net, everything stops when I send a message. I have not changed my sendmail configuration yet to vurtual hosting so I cannot see where that is the problem. I installed the bind package with no forwarding so it is in caching setup. Thanks for all the help. -- Brian Schramm [EMAIL PROTECTED]