Re: [Freevo-users] Regarding chanlist in freevo.conf
Yugandhar,
It gives you the message that the channel has no data loaded, because
you don't have a working TV.xml.
You should be able to watch TV though, and to manually schedule a
recording. You just don't have a working TV guide, that's all.
If you have trouble watching/recording tv then something else is
wrong, because it doesn't _need_ a working tv guide.
Michel
2007/6/18, Yugandhar G.V <[EMAIL PROTECTED]>:
> Hi Michel,
> I have followed the steps given by you and when I start the freevo
> and enter into watch TV it shows the TV guide and when I enter into the TV
> guide and enter on any channel it is showing the following error:
>This channel has no data loaded.
> The frequencies I entered are correct because I have checked with ivtv-tune
> application and captured the video and played using mplayer can you please
> tell me what exactly is happening.
>
> Regards,
> Yugandhar G.V.
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Michel
> Hoogervorst
> Sent: Tuesday, June 12, 2007 8:05 PM
> To: freevo-users@lists.sourceforge.net
> Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
>
> You could just fill in anything for the xmlid, this is only needed in
> order to make the program guide work like a program guide ;-)
>
> 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> > For getting the freevo to work I have to fill that structure TV_CHANNELS
> > right in that what I have to put in the place of xmltvid.
> >
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
> > Of Michel Hoogervorst
> > Sent: Tuesday, June 12, 2007 7:52 PM
> > To: Yugandhar G.V
> > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
> >
> > I must say I have no clue... maybe someone else on this list from
> > India could help with this?
> > You can however still use Freevo with TV without the TV.xml, it should
> > already work, but you just don't see any programs in the program
> > guide.
> >
> >
> > Michel
> >
> > 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> > > Hi Michel,
> > > Tv_grab_India is not so what I have to do how can I create that
> .
> > I
> > > have to create at the time of installation or I can create after
> > > installation too.
> > >
> > > Regards,
> > > Yugandhar.
> > >
> > > -Original Message-
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf
> > > Of Michel Hoogervorst
> > > Sent: Tuesday, June 12, 2007 5:35 PM
> > > To: freevo-users@lists.sourceforge.net
> > > Cc: Yugandhar G.V
> > > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
> > >
> > > Yugandhar,
> > >
> > > If you have installed xmltv you can issue a "tv_grab_xx > /tmp/TV.xml"
> > > to make things work (where xx should be your country-code).
> > >
> > >
> > > Michel
> > >
> > > 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> > > > Hi Michel,
> > > > Once again thanks for your reply, I have followed the steps
> > given
> > > by
> > > > you. But I had one problem I have changed freq.py file as specified by
> > you
> > > > and entered the channel list for India as follows:
> > > > CHANLIST = {
> > > > "nl-multikabel": dict(PAL_MULTIKABEL),
> > > > "us-bcast" : dict(NTSC_BCAST),
> > > > "india": dict(PAL_INIDA),
> > > > .
> > > > }
> > > > After this I have to make PAL_INDIA with the channels and frequency my
> > > > question I think the frequencies entered in freq.py is kilohertz am I
> > > right
> > > > I also I have convert the megahertz frequency to kilohertz and enter
> in
> > > the
> > > > table or else I can directly enter the megahertz frequency One more
> > > question
> > > > is have installed XML TV but still I can't able to see the TV.xml file
> > can
> > > u
> > > > just tell me why I can't able to see the TV.xml file in my system.
> > > >
> > > > Regards,
> > > > Yugandhar.
> > > > -Original Message-
> > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> > Behalf
> > > > Of Michel Hoogervorst
> > > > Sent: Tuesday, June 12, 2007
Re: [Freevo-users] Regarding chanlist in freevo.conf
Hi Michel,
I have followed the steps given by you and when I start the freevo
and enter into watch TV it shows the TV guide and when I enter into the TV
guide and enter on any channel it is showing the following error:
This channel has no data loaded.
The frequencies I entered are correct because I have checked with ivtv-tune
application and captured the video and played using mplayer can you please
tell me what exactly is happening.
Regards,
Yugandhar G.V.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Michel
Hoogervorst
Sent: Tuesday, June 12, 2007 8:05 PM
To: freevo-users@lists.sourceforge.net
Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
You could just fill in anything for the xmlid, this is only needed in
order to make the program guide work like a program guide ;-)
2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> For getting the freevo to work I have to fill that structure TV_CHANNELS
> right in that what I have to put in the place of xmltvid.
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
> Of Michel Hoogervorst
> Sent: Tuesday, June 12, 2007 7:52 PM
> To: Yugandhar G.V
> Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
>
> I must say I have no clue... maybe someone else on this list from
> India could help with this?
> You can however still use Freevo with TV without the TV.xml, it should
> already work, but you just don't see any programs in the program
> guide.
>
>
> Michel
>
> 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> > Hi Michel,
> > Tv_grab_India is not so what I have to do how can I create that
.
> I
> > have to create at the time of installation or I can create after
> > installation too.
> >
> > Regards,
> > Yugandhar.
> >
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf
> > Of Michel Hoogervorst
> > Sent: Tuesday, June 12, 2007 5:35 PM
> > To: freevo-users@lists.sourceforge.net
> > Cc: Yugandhar G.V
> > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
> >
> > Yugandhar,
> >
> > If you have installed xmltv you can issue a "tv_grab_xx > /tmp/TV.xml"
> > to make things work (where xx should be your country-code).
> >
> >
> > Michel
> >
> > 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> > > Hi Michel,
> > > Once again thanks for your reply, I have followed the steps
> given
> > by
> > > you. But I had one problem I have changed freq.py file as specified by
> you
> > > and entered the channel list for India as follows:
> > > CHANLIST = {
> > > "nl-multikabel": dict(PAL_MULTIKABEL),
> > > "us-bcast" : dict(NTSC_BCAST),
> > > "india": dict(PAL_INIDA),
> > > .
> > > }
> > > After this I have to make PAL_INDIA with the channels and frequency my
> > > question I think the frequencies entered in freq.py is kilohertz am I
> > right
> > > I also I have convert the megahertz frequency to kilohertz and enter
in
> > the
> > > table or else I can directly enter the megahertz frequency One more
> > question
> > > is have installed XML TV but still I can't able to see the TV.xml file
> can
> > u
> > > just tell me why I can't able to see the TV.xml file in my system.
> > >
> > > Regards,
> > > Yugandhar.
> > > -Original Message-
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf
> > > Of Michel Hoogervorst
> > > Sent: Tuesday, June 12, 2007 11:47 AM
> > > To: Yugandhar G.V
> > > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
> > >
> > > Yugandhar,
> > >
> > > What you entered in freq.py should look something like this:
> > > CHANLIST = {
> > > "nl-multikabel": dict(PAL_MULTIKABEL),
> > > "us-bcast" : dict(NTSC_BCAST),
> > > .
> > > }
> > >
> > > Where the "nl-multikabel" line matches the "PAL_MULTIKABEL" below:
> > >
> > > PAL_MULTIKABEL = [
> > > ("10", 208000 ), # Nederland 1
> > > ("11", 216000 ), # Nederland 2
> > > ("12", 224000 ), # Nederland 3
> > > ]
> > >
> > > Where this is ("channel", frequency).
> > > In your local_conf.py, you should mat
Re: [Freevo-users] Regarding chanlist in freevo.conf
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Michel
Hoogervorst
Sent: Tuesday, June 12, 2007 8:05 PM
To: freevo-users@lists.sourceforge.net
Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
You could just fill in anything for the xmlid, this is only needed in
order to make the program guide work like a program guide ;-)
2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> For getting the freevo to work I have to fill that structure TV_CHANNELS
> right in that what I have to put in the place of xmltvid.
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
> Of Michel Hoogervorst
> Sent: Tuesday, June 12, 2007 7:52 PM
> To: Yugandhar G.V
> Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
>
> I must say I have no clue... maybe someone else on this list from
> India could help with this?
> You can however still use Freevo with TV without the TV.xml, it should
> already work, but you just don't see any programs in the program
> guide.
>
>
> Michel
>
> 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> > Hi Michel,
> > Tv_grab_India is not so what I have to do how can I create that
.
> I
> > have to create at the time of installation or I can create after
> > installation too.
> >
> > Regards,
> > Yugandhar.
> >
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf
> > Of Michel Hoogervorst
> > Sent: Tuesday, June 12, 2007 5:35 PM
> > To: freevo-users@lists.sourceforge.net
> > Cc: Yugandhar G.V
> > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
> >
> > Yugandhar,
> >
> > If you have installed xmltv you can issue a "tv_grab_xx > /tmp/TV.xml"
> > to make things work (where xx should be your country-code).
> >
> >
> > Michel
> >
> > 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> > > Hi Michel,
> > > Once again thanks for your reply, I have followed the steps
> given
> > by
> > > you. But I had one problem I have changed freq.py file as specified by
> you
> > > and entered the channel list for India as follows:
> > > CHANLIST = {
> > > "nl-multikabel": dict(PAL_MULTIKABEL),
> > > "us-bcast" : dict(NTSC_BCAST),
> > > "india": dict(PAL_INIDA),
> > > .
> > > }
> > > After this I have to make PAL_INDIA with the channels and frequency my
> > > question I think the frequencies entered in freq.py is kilohertz am I
> > right
> > > I also I have convert the megahertz frequency to kilohertz and enter
in
> > the
> > > table or else I can directly enter the megahertz frequency One more
> > question
> > > is have installed XML TV but still I can't able to see the TV.xml file
> can
> > u
> > > just tell me why I can't able to see the TV.xml file in my system.
> > >
> > > Regards,
> > > Yugandhar.
> > > -Original Message-
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf
> > > Of Michel Hoogervorst
> > > Sent: Tuesday, June 12, 2007 11:47 AM
> > > To: Yugandhar G.V
> > > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
> > >
> > > Yugandhar,
> > >
> > > What you entered in freq.py should look something like this:
> > > CHANLIST = {
> > > "nl-multikabel": dict(PAL_MULTIKABEL),
> > > "us-bcast" : dict(NTSC_BCAST),
> > > .
> > > }
> > >
> > > Where the "nl-multikabel" line matches the "PAL_MULTIKABEL" below:
> > >
> > > PAL_MULTIKABEL = [
> > > ("10", 208000 ), # Nederland 1
> > > ("11", 216000 ), # Nederland 2
> > > ("12", 224000 ), # Nederland 3
> > > ]
> > >
> > > Where this is ("channel", frequency).
> > > In your local_conf.py, you should match that like this:
> > >
> > > TV_CHANNELS = [
> > > ('1.tvgids.nl', 'Nederland 1', '10'),
> > > ('2.tvgids.nl', 'Nederland 2', '11'),
> > > ('3.tvgids.nl', 'Nederland 3', '12'),
> > > ]
> > >
> > > Whe
Re: [Freevo-users] Regarding chanlist in freevo.conf
Hi Michel,
I have followed the steps given by you and I getting the problem
like this:
1. Changes had been done according to your suggestion.
2. Started freevo.
3. Enter to watch TV menu option.
4. Enter to TV guide Menu option.
5. I can see the list of channels being added.
When I enter on a particular channel it is showing the channel data
has not loaded. Can you just tell me have I done anything wrong.
Regards,
Yugandhar G.V.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Michel
Hoogervorst
Sent: Tuesday, June 12, 2007 8:05 PM
To: freevo-users@lists.sourceforge.net
Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
You could just fill in anything for the xmlid, this is only needed in
order to make the program guide work like a program guide ;-)
2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> For getting the freevo to work I have to fill that structure TV_CHANNELS
> right in that what I have to put in the place of xmltvid.
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
> Of Michel Hoogervorst
> Sent: Tuesday, June 12, 2007 7:52 PM
> To: Yugandhar G.V
> Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
>
> I must say I have no clue... maybe someone else on this list from
> India could help with this?
> You can however still use Freevo with TV without the TV.xml, it should
> already work, but you just don't see any programs in the program
> guide.
>
>
> Michel
>
> 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> > Hi Michel,
> > Tv_grab_India is not so what I have to do how can I create that
.
> I
> > have to create at the time of installation or I can create after
> > installation too.
> >
> > Regards,
> > Yugandhar.
> >
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf
> > Of Michel Hoogervorst
> > Sent: Tuesday, June 12, 2007 5:35 PM
> > To: freevo-users@lists.sourceforge.net
> > Cc: Yugandhar G.V
> > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
> >
> > Yugandhar,
> >
> > If you have installed xmltv you can issue a "tv_grab_xx > /tmp/TV.xml"
> > to make things work (where xx should be your country-code).
> >
> >
> > Michel
> >
> > 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> > > Hi Michel,
> > > Once again thanks for your reply, I have followed the steps
> given
> > by
> > > you. But I had one problem I have changed freq.py file as specified by
> you
> > > and entered the channel list for India as follows:
> > > CHANLIST = {
> > > "nl-multikabel": dict(PAL_MULTIKABEL),
> > > "us-bcast" : dict(NTSC_BCAST),
> > > "india": dict(PAL_INIDA),
> > > .
> > > }
> > > After this I have to make PAL_INDIA with the channels and frequency my
> > > question I think the frequencies entered in freq.py is kilohertz am I
> > right
> > > I also I have convert the megahertz frequency to kilohertz and enter
in
> > the
> > > table or else I can directly enter the megahertz frequency One more
> > question
> > > is have installed XML TV but still I can't able to see the TV.xml file
> can
> > u
> > > just tell me why I can't able to see the TV.xml file in my system.
> > >
> > > Regards,
> > > Yugandhar.
> > > -Original Message-
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf
> > > Of Michel Hoogervorst
> > > Sent: Tuesday, June 12, 2007 11:47 AM
> > > To: Yugandhar G.V
> > > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
> > >
> > > Yugandhar,
> > >
> > > What you entered in freq.py should look something like this:
> > > CHANLIST = {
> > > "nl-multikabel": dict(PAL_MULTIKABEL),
> > > "us-bcast" : dict(NTSC_BCAST),
> > > .
> > > }
> > >
> > > Where the "nl-multikabel" line matches the "PAL_MULTIKABEL" below:
> > >
> > > PAL_MULTIKABEL = [
> > > ("10", 208000 ), # Nederland 1
> > > ("11", 216000 ), # Nederland 2
> > > ("12", 224000 ), # Nederland 3
> > > ]
> > >
> > > Where this is ("channel", frequency).
> > > In your local_conf.py,
Re: [Freevo-users] Regarding chanlist in freevo.conf
You could just fill in anything for the xmlid, this is only needed in
order to make the program guide work like a program guide ;-)
2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> For getting the freevo to work I have to fill that structure TV_CHANNELS
> right in that what I have to put in the place of xmltvid.
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
> Of Michel Hoogervorst
> Sent: Tuesday, June 12, 2007 7:52 PM
> To: Yugandhar G.V
> Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
>
> I must say I have no clue... maybe someone else on this list from
> India could help with this?
> You can however still use Freevo with TV without the TV.xml, it should
> already work, but you just don't see any programs in the program
> guide.
>
>
> Michel
>
> 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> > Hi Michel,
> > Tv_grab_India is not so what I have to do how can I create that .
> I
> > have to create at the time of installation or I can create after
> > installation too.
> >
> > Regards,
> > Yugandhar.
> >
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
> > Of Michel Hoogervorst
> > Sent: Tuesday, June 12, 2007 5:35 PM
> > To: freevo-users@lists.sourceforge.net
> > Cc: Yugandhar G.V
> > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
> >
> > Yugandhar,
> >
> > If you have installed xmltv you can issue a "tv_grab_xx > /tmp/TV.xml"
> > to make things work (where xx should be your country-code).
> >
> >
> > Michel
> >
> > 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> > > Hi Michel,
> > > Once again thanks for your reply, I have followed the steps
> given
> > by
> > > you. But I had one problem I have changed freq.py file as specified by
> you
> > > and entered the channel list for India as follows:
> > > CHANLIST = {
> > > "nl-multikabel": dict(PAL_MULTIKABEL),
> > > "us-bcast" : dict(NTSC_BCAST),
> > > "india": dict(PAL_INIDA),
> > > .
> > > }
> > > After this I have to make PAL_INDIA with the channels and frequency my
> > > question I think the frequencies entered in freq.py is kilohertz am I
> > right
> > > I also I have convert the megahertz frequency to kilohertz and enter in
> > the
> > > table or else I can directly enter the megahertz frequency One more
> > question
> > > is have installed XML TV but still I can't able to see the TV.xml file
> can
> > u
> > > just tell me why I can't able to see the TV.xml file in my system.
> > >
> > > Regards,
> > > Yugandhar.
> > > -Original Message-
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf
> > > Of Michel Hoogervorst
> > > Sent: Tuesday, June 12, 2007 11:47 AM
> > > To: Yugandhar G.V
> > > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
> > >
> > > Yugandhar,
> > >
> > > What you entered in freq.py should look something like this:
> > > CHANLIST = {
> > > "nl-multikabel": dict(PAL_MULTIKABEL),
> > > "us-bcast" : dict(NTSC_BCAST),
> > > .
> > > }
> > >
> > > Where the "nl-multikabel" line matches the "PAL_MULTIKABEL" below:
> > >
> > > PAL_MULTIKABEL = [
> > > ("10", 208000 ), # Nederland 1
> > > ("11", 216000 ), # Nederland 2
> > > ("12", 224000 ), # Nederland 3
> > > ]
> > >
> > > Where this is ("channel", frequency).
> > > In your local_conf.py, you should match that like this:
> > >
> > > TV_CHANNELS = [
> > > ('1.tvgids.nl', 'Nederland 1', '10'),
> > > ('2.tvgids.nl', 'Nederland 2', '11'),
> > > ('3.tvgids.nl', 'Nederland 3', '12'),
> > > ]
> > >
> > > Where this is ('xmltv_id', 'Display name', 'channel')
> > >
> > > The xmltv_id should match your TV.xml (made by xmltv). This is not
> > > nessacary for TV to work, but is needed for the tv-guide only.
> > >
> > > Hope this is clear?
>
Re: [Freevo-users] Regarding chanlist in freevo.conf
For getting the freevo to work I have to fill that structure TV_CHANNELS
right in that what I have to put in the place of xmltvid.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Michel Hoogervorst
Sent: Tuesday, June 12, 2007 7:52 PM
To: Yugandhar G.V
Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
I must say I have no clue... maybe someone else on this list from
India could help with this?
You can however still use Freevo with TV without the TV.xml, it should
already work, but you just don't see any programs in the program
guide.
Michel
2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> Hi Michel,
> Tv_grab_India is not so what I have to do how can I create that .
I
> have to create at the time of installation or I can create after
> installation too.
>
> Regards,
> Yugandhar.
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
> Of Michel Hoogervorst
> Sent: Tuesday, June 12, 2007 5:35 PM
> To: freevo-users@lists.sourceforge.net
> Cc: Yugandhar G.V
> Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
>
> Yugandhar,
>
> If you have installed xmltv you can issue a "tv_grab_xx > /tmp/TV.xml"
> to make things work (where xx should be your country-code).
>
>
> Michel
>
> 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> > Hi Michel,
> > Once again thanks for your reply, I have followed the steps
given
> by
> > you. But I had one problem I have changed freq.py file as specified by
you
> > and entered the channel list for India as follows:
> > CHANLIST = {
> > "nl-multikabel": dict(PAL_MULTIKABEL),
> > "us-bcast" : dict(NTSC_BCAST),
> > "india": dict(PAL_INIDA),
> > .
> > }
> > After this I have to make PAL_INDIA with the channels and frequency my
> > question I think the frequencies entered in freq.py is kilohertz am I
> right
> > I also I have convert the megahertz frequency to kilohertz and enter in
> the
> > table or else I can directly enter the megahertz frequency One more
> question
> > is have installed XML TV but still I can't able to see the TV.xml file
can
> u
> > just tell me why I can't able to see the TV.xml file in my system.
> >
> > Regards,
> > Yugandhar.
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf
> > Of Michel Hoogervorst
> > Sent: Tuesday, June 12, 2007 11:47 AM
> > To: Yugandhar G.V
> > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
> >
> > Yugandhar,
> >
> > What you entered in freq.py should look something like this:
> > CHANLIST = {
> > "nl-multikabel": dict(PAL_MULTIKABEL),
> > "us-bcast" : dict(NTSC_BCAST),
> > .
> > }
> >
> > Where the "nl-multikabel" line matches the "PAL_MULTIKABEL" below:
> >
> > PAL_MULTIKABEL = [
> > ("10", 208000 ), # Nederland 1
> > ("11", 216000 ), # Nederland 2
> > ("12", 224000 ), # Nederland 3
> > ]
> >
> > Where this is ("channel", frequency).
> > In your local_conf.py, you should match that like this:
> >
> > TV_CHANNELS = [
> > ('1.tvgids.nl', 'Nederland 1', '10'),
> > ('2.tvgids.nl', 'Nederland 2', '11'),
> > ('3.tvgids.nl', 'Nederland 3', '12'),
> > ]
> >
> > Where this is ('xmltv_id', 'Display name', 'channel')
> >
> > The xmltv_id should match your TV.xml (made by xmltv). This is not
> > nessacary for TV to work, but is needed for the tv-guide only.
> >
> > Hope this is clear?
> >
> >
> > Michel
> >
> > 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> > >
> > > Hi Michel,
> > >I am not using the cable for the Hauppauge card I am using the
> > > antenna to get the channels. So, I want to scan for the channels first
> and
> > > list down all the frequencies and then I have to edit the freq.py
file.
> If
> > > you any thing about this please help me.
> > >After editing freq.py file for my country(India) just tell me
> what
> > > are all the things to be done. Should I go directly to TV guide and it
> > shows
> > > the channels list so that if I enter on a particular channel can I
able
> > to
> > > watch the tv.
> > >
> > > Regards,
> > > Yugandhar.
> >
> >
>
>
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
___
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Regarding chanlist in freevo.conf
Hi Michel,
Tv_grab_India is not so what I have to do how can I create that . I
have to create at the time of installation or I can create after
installation too.
Regards,
Yugandhar.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Michel Hoogervorst
Sent: Tuesday, June 12, 2007 5:35 PM
To: freevo-users@lists.sourceforge.net
Cc: Yugandhar G.V
Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
Yugandhar,
If you have installed xmltv you can issue a "tv_grab_xx > /tmp/TV.xml"
to make things work (where xx should be your country-code).
Michel
2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> Hi Michel,
> Once again thanks for your reply, I have followed the steps given
by
> you. But I had one problem I have changed freq.py file as specified by you
> and entered the channel list for India as follows:
> CHANLIST = {
> "nl-multikabel": dict(PAL_MULTIKABEL),
> "us-bcast" : dict(NTSC_BCAST),
> "india": dict(PAL_INIDA),
> .
> }
> After this I have to make PAL_INDIA with the channels and frequency my
> question I think the frequencies entered in freq.py is kilohertz am I
right
> I also I have convert the megahertz frequency to kilohertz and enter in
the
> table or else I can directly enter the megahertz frequency One more
question
> is have installed XML TV but still I can't able to see the TV.xml file can
u
> just tell me why I can't able to see the TV.xml file in my system.
>
> Regards,
> Yugandhar.
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
> Of Michel Hoogervorst
> Sent: Tuesday, June 12, 2007 11:47 AM
> To: Yugandhar G.V
> Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
>
> Yugandhar,
>
> What you entered in freq.py should look something like this:
> CHANLIST = {
> "nl-multikabel": dict(PAL_MULTIKABEL),
> "us-bcast" : dict(NTSC_BCAST),
> .
> }
>
> Where the "nl-multikabel" line matches the "PAL_MULTIKABEL" below:
>
> PAL_MULTIKABEL = [
> ("10", 208000 ), # Nederland 1
> ("11", 216000 ), # Nederland 2
> ("12", 224000 ), # Nederland 3
> ]
>
> Where this is ("channel", frequency).
> In your local_conf.py, you should match that like this:
>
> TV_CHANNELS = [
> ('1.tvgids.nl', 'Nederland 1', '10'),
> ('2.tvgids.nl', 'Nederland 2', '11'),
> ('3.tvgids.nl', 'Nederland 3', '12'),
> ]
>
> Where this is ('xmltv_id', 'Display name', 'channel')
>
> The xmltv_id should match your TV.xml (made by xmltv). This is not
> nessacary for TV to work, but is needed for the tv-guide only.
>
> Hope this is clear?
>
>
> Michel
>
> 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> >
> > Hi Michel,
> >I am not using the cable for the Hauppauge card I am using the
> > antenna to get the channels. So, I want to scan for the channels first
and
> > list down all the frequencies and then I have to edit the freq.py file.
If
> > you any thing about this please help me.
> >After editing freq.py file for my country(India) just tell me
what
> > are all the things to be done. Should I go directly to TV guide and it
> shows
> > the channels list so that if I enter on a particular channel can I able
> to
> > watch the tv.
> >
> > Regards,
> > Yugandhar.
>
>
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
___
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Regarding chanlist in freevo.conf
Yugandhar,
If you have installed xmltv you can issue a "tv_grab_xx > /tmp/TV.xml"
to make things work (where xx should be your country-code).
Michel
2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> Hi Michel,
> Once again thanks for your reply, I have followed the steps given by
> you. But I had one problem I have changed freq.py file as specified by you
> and entered the channel list for India as follows:
> CHANLIST = {
> "nl-multikabel": dict(PAL_MULTIKABEL),
> "us-bcast" : dict(NTSC_BCAST),
> "india": dict(PAL_INIDA),
> .
> }
> After this I have to make PAL_INDIA with the channels and frequency my
> question I think the frequencies entered in freq.py is kilohertz am I right
> I also I have convert the megahertz frequency to kilohertz and enter in the
> table or else I can directly enter the megahertz frequency One more question
> is have installed XML TV but still I can't able to see the TV.xml file can u
> just tell me why I can't able to see the TV.xml file in my system.
>
> Regards,
> Yugandhar.
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
> Of Michel Hoogervorst
> Sent: Tuesday, June 12, 2007 11:47 AM
> To: Yugandhar G.V
> Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
>
> Yugandhar,
>
> What you entered in freq.py should look something like this:
> CHANLIST = {
> "nl-multikabel": dict(PAL_MULTIKABEL),
> "us-bcast" : dict(NTSC_BCAST),
> .
> }
>
> Where the "nl-multikabel" line matches the "PAL_MULTIKABEL" below:
>
> PAL_MULTIKABEL = [
> ("10", 208000 ), # Nederland 1
> ("11", 216000 ), # Nederland 2
> ("12", 224000 ), # Nederland 3
> ]
>
> Where this is ("channel", frequency).
> In your local_conf.py, you should match that like this:
>
> TV_CHANNELS = [
> ('1.tvgids.nl', 'Nederland 1', '10'),
> ('2.tvgids.nl', 'Nederland 2', '11'),
> ('3.tvgids.nl', 'Nederland 3', '12'),
> ]
>
> Where this is ('xmltv_id', 'Display name', 'channel')
>
> The xmltv_id should match your TV.xml (made by xmltv). This is not
> nessacary for TV to work, but is needed for the tv-guide only.
>
> Hope this is clear?
>
>
> Michel
>
> 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
> >
> > Hi Michel,
> >I am not using the cable for the Hauppauge card I am using the
> > antenna to get the channels. So, I want to scan for the channels first and
> > list down all the frequencies and then I have to edit the freq.py file. If
> > you any thing about this please help me.
> >After editing freq.py file for my country(India) just tell me what
> > are all the things to be done. Should I go directly to TV guide and it
> shows
> > the channels list so that if I enter on a particular channel can I able
> to
> > watch the tv.
> >
> > Regards,
> > Yugandhar.
>
>
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
___
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Regarding chanlist in freevo.conf
Hi Michel,
Once again thanks for your reply, I have followed the steps given by
you. But I had one problem I have changed freq.py file as specified by you
and entered the channel list for India as follows:
CHANLIST = {
"nl-multikabel": dict(PAL_MULTIKABEL),
"us-bcast" : dict(NTSC_BCAST),
"india": dict(PAL_INIDA),
.
}
After this I have to make PAL_INDIA with the channels and frequency my
question I think the frequencies entered in freq.py is kilohertz am I right
I also I have convert the megahertz frequency to kilohertz and enter in the
table or else I can directly enter the megahertz frequency One more question
is have installed XML TV but still I can't able to see the TV.xml file can u
just tell me why I can't able to see the TV.xml file in my system.
Regards,
Yugandhar.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Michel Hoogervorst
Sent: Tuesday, June 12, 2007 11:47 AM
To: Yugandhar G.V
Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
Yugandhar,
What you entered in freq.py should look something like this:
CHANLIST = {
"nl-multikabel": dict(PAL_MULTIKABEL),
"us-bcast" : dict(NTSC_BCAST),
.
}
Where the "nl-multikabel" line matches the "PAL_MULTIKABEL" below:
PAL_MULTIKABEL = [
("10", 208000 ), # Nederland 1
("11", 216000 ), # Nederland 2
("12", 224000 ), # Nederland 3
]
Where this is ("channel", frequency).
In your local_conf.py, you should match that like this:
TV_CHANNELS = [
('1.tvgids.nl', 'Nederland 1', '10'),
('2.tvgids.nl', 'Nederland 2', '11'),
('3.tvgids.nl', 'Nederland 3', '12'),
]
Where this is ('xmltv_id', 'Display name', 'channel')
The xmltv_id should match your TV.xml (made by xmltv). This is not
nessacary for TV to work, but is needed for the tv-guide only.
Hope this is clear?
Michel
2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
>
> Hi Michel,
>I am not using the cable for the Hauppauge card I am using the
> antenna to get the channels. So, I want to scan for the channels first and
> list down all the frequencies and then I have to edit the freq.py file. If
> you any thing about this please help me.
>After editing freq.py file for my country(India) just tell me what
> are all the things to be done. Should I go directly to TV guide and it
shows
> the channels list so that if I enter on a particular channel can I able
to
> watch the tv.
>
> Regards,
> Yugandhar.
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
___
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Regarding chanlist in freevo.conf
Yugandhar,
What you entered in freq.py should look something like this:
CHANLIST = {
"nl-multikabel": dict(PAL_MULTIKABEL),
"us-bcast" : dict(NTSC_BCAST),
.
}
Where the "nl-multikabel" line matches the "PAL_MULTIKABEL" below:
PAL_MULTIKABEL = [
("10", 208000 ), # Nederland 1
("11", 216000 ), # Nederland 2
("12", 224000 ), # Nederland 3
]
Where this is ("channel", frequency).
In your local_conf.py, you should match that like this:
TV_CHANNELS = [
('1.tvgids.nl', 'Nederland 1', '10'),
('2.tvgids.nl', 'Nederland 2', '11'),
('3.tvgids.nl', 'Nederland 3', '12'),
]
Where this is ('xmltv_id', 'Display name', 'channel')
The xmltv_id should match your TV.xml (made by xmltv). This is not
nessacary for TV to work, but is needed for the tv-guide only.
Hope this is clear?
Michel
2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>:
>
> Hi Michel,
>I am not using the cable for the Hauppauge card I am using the
> antenna to get the channels. So, I want to scan for the channels first and
> list down all the frequencies and then I have to edit the freq.py file. If
> you any thing about this please help me.
>After editing freq.py file for my country(India) just tell me what
> are all the things to be done. Should I go directly to TV guide and it shows
> the channels list so that if I enter on a particular channel can I able to
> watch the tv.
>
> Regards,
> Yugandhar.
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
___
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Regarding chanlist in freevo.conf
Hi Michel,
I am not using the cable for the Hauppauge card I am using the
antenna to get the channels. So, I want to scan for the channels first and
list down all the frequencies and then I have to edit the freq.py file. If
you any thing about this please help me.
After editing freq.py file for my country(India) just tell me what
are all the things to be done. Should I go directly to TV guide and it shows
the channels list so that if I enter on a particular channel can I able to
watch the tv.
Regards,
Yugandhar.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Michel Hoogervorst
Sent: Monday, June 11, 2007 12:35 PM
To: Yugandhar G.V
Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
Yugandhar,
You are now replying to me, instead of to the list ;-)
Problem is, I don't know how to answer your question, because I have
never used scantv (I just copied all freq's over from the website of
my cable provider).
Please reply to the list. There will certainly be someone to answer
your question ;-)
Michel
2007/6/11, Yugandhar G.V <[EMAIL PROTECTED]>:
> Hi Michel,
> I have followed the steps which has been in the document of
> AnalogueGen. I have xawtv package installed in my system. I want to scan
for
> channels using scantv application but when I run the scantv application it
> is taking the default input as Television how can I change the input to
scan
> for the channels using my Hauppauge card what is the option for that.
>
> Regards,
> Yugandhar G.V.
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
> Of Michel Hoogervorst
> Sent: Friday, June 08, 2007 12:15 PM
> To: freevo-users@lists.sourceforge.net
> Cc: Yugandhar G.V
> Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
>
> Yugandhar,
>
> You have to put the frequency list in freq.py, and have to add the
> channels in local_conf.py like discribed in the wiki.
>
> http://freevo.sourceforge.net/cgi-bin/doc/AnalogueGen
>
>
>
> Michel
>
>
>
> 2007/6/8, Yugandhar G.V <[EMAIL PROTECTED]>:
> > Hi Michel,
> > I have edited the freq.py file still my channels has not been
> show
> > up in freevo TV guide can u please briefly explain me after changing the
> > freq.py what are the file to edited and how the xmltv to be configured.
> > Sorry for giving u the trouble.
> >
> > Regards,
> > Yugandhar G.V.
> >
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf
> > Of Michel Hoogervorst
> > Sent: Thursday, June 07, 2007 12:20 PM
> > To: freevo-users@lists.sourceforge.net
> > Cc: Yugandhar G.V
> > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
> >
> > Yugandhar,
> >
> > In the freq.py file of Freevo 1.7 I see this:
> >
> > CHANLIST = {
> > "us-bcast" : dict(NTSC_BCAST),
> > "us-cable" : dict(NTSC_CABLE),
> > "us-cable-hrc" : dict(NTSC_HRC),
> > "japan-bcast" : dict(NTSC_BCAST_JP),
> > "japan-cable" : dict(NTSC_CABLE_JP),
> > "europe-west" : dict(PAL_EUROPE),
> > "europe-east" : dict(PAL_EUROPE_EAST),
> > "italy": dict(PAL_ITALY),
> > "newzealand" : dict(PAL_NEWZEALAND),
> > "australia": dict(PAL_AUSTRALIA),
> > "ireland" : dict(PAL_IRELAND),
> > "france" : dict(SECAM_FRANCE),
> > "china-bcast" : dict(PAL_CHINA),
> > "canada-cable" : dict(NTSC_CABLE_CAN),
> > "southafrica" : dict(PAL_BCAST_ZA),
> > "argentina": dict(ARGENTINA),
> > "russia" : dict(RUSSIA),
> > "switzerland" : dict(PAL_SWITZERLAND),
> > }
> >
> > As you can see, India is not in this list, so you will have to add the
> > frequencies for all channels in India yourself in this file. As far
> > as I know, there is no easier way to do this...
> >
> > Then again, editing the freq.py file is not that hard, you just have
> > to know at which frequencies your channels are.
> >
> >
> >
> > Michel
> >
> >
> > 2007/6/7, Yugandhar G.V <[EMAIL PROTECTED]>:
> > >
> > >
> > >
> > >
> > > Hi Michel,
> > >
> > > Thanks for your reply. You mean to say that I have to made
> > > frequencies list provided by cable
Re: [Freevo-users] Regarding chanlist in freevo.conf
Yugandhar,
You have to put the frequency list in freq.py, and have to add the
channels in local_conf.py like discribed in the wiki.
http://freevo.sourceforge.net/cgi-bin/doc/AnalogueGen
Michel
2007/6/8, Yugandhar G.V <[EMAIL PROTECTED]>:
> Hi Michel,
> I have edited the freq.py file still my channels has not been show
> up in freevo TV guide can u please briefly explain me after changing the
> freq.py what are the file to edited and how the xmltv to be configured.
> Sorry for giving u the trouble.
>
> Regards,
> Yugandhar G.V.
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
> Of Michel Hoogervorst
> Sent: Thursday, June 07, 2007 12:20 PM
> To: freevo-users@lists.sourceforge.net
> Cc: Yugandhar G.V
> Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf
>
> Yugandhar,
>
> In the freq.py file of Freevo 1.7 I see this:
>
> CHANLIST = {
> "us-bcast" : dict(NTSC_BCAST),
> "us-cable" : dict(NTSC_CABLE),
> "us-cable-hrc" : dict(NTSC_HRC),
> "japan-bcast" : dict(NTSC_BCAST_JP),
> "japan-cable" : dict(NTSC_CABLE_JP),
> "europe-west" : dict(PAL_EUROPE),
> "europe-east" : dict(PAL_EUROPE_EAST),
> "italy": dict(PAL_ITALY),
> "newzealand" : dict(PAL_NEWZEALAND),
> "australia": dict(PAL_AUSTRALIA),
> "ireland" : dict(PAL_IRELAND),
> "france" : dict(SECAM_FRANCE),
> "china-bcast" : dict(PAL_CHINA),
> "canada-cable" : dict(NTSC_CABLE_CAN),
> "southafrica" : dict(PAL_BCAST_ZA),
> "argentina": dict(ARGENTINA),
> "russia" : dict(RUSSIA),
> "switzerland" : dict(PAL_SWITZERLAND),
> }
>
> As you can see, India is not in this list, so you will have to add the
> frequencies for all channels in India yourself in this file. As far
> as I know, there is no easier way to do this...
>
> Then again, editing the freq.py file is not that hard, you just have
> to know at which frequencies your channels are.
>
>
>
> Michel
>
>
> 2007/6/7, Yugandhar G.V <[EMAIL PROTECTED]>:
> >
> >
> >
> >
> > Hi Michel,
> >
> > Thanks for your reply. You mean to say that I have to made
> > frequencies list provided by cable operator. If I am using the antenna to
> > tune the card how can I go about it. I am from India so what I have to put
> > in the chanlist my card is for PAL i.e in the place of us-cable what I
> have
> > to edit. Is there is any way to scan the channels. Please reply me.
> >
> >
> >
> > Regards,
> >
> > Yugandhar.
>
>
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
___
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Regarding chanlist in freevo.conf
John Molohan wrote:
> :) Sorry Jody I didn't realise at a glance that it was you.
>
> Jody Gugelhupf wrote:
>> will do, though atm i'm still working on the vlc live tv stream wiki, after
>> that i will get to
>> that :)
>> --- John Molohan <[EMAIL PROTECTED]> wrote:
>>
>>
>>> Hi Jody,
>>>
>>> If you submit a patch for freq.py and/or update the wiki entry at
>>> http://freevo.sourceforge.net/cgi-bin/doc/AnalogueGen that'd help.
There is another way to set-up you channels, see
http://freevo.sourceforge.net/cgi-bin/doc/ATVCHANNELSCH for an example.
But IIRC mplayer needs the channel list
Duncan
>>>
>>> Thanks,
>>>
>>> John
>>>
>>> Jody Gugelhupf wrote:
>>>
hi ppl,
well used scan-tv to get the chans for the netherlands, as actually the
frequencies are
>>> different
>>>
here in the regions of the netherlands, the same is true for e.g. turkey,
and of course i
>>> added
>>>
some channels which i broadcast myself in the dorm, and a vcr chan, camera
chan etc... so u
>>> can
>>>
just better add the stuff manually in the local_conf.py also tvtime has a
scanner for
>>> frequencies,
>>>
which you can use... or of course most TV providers have a list of
available chans with
frequencies online, which you can just enter manually, u might have to
convert them though...
>>> good
>>>
luck
:)
--- John Molohan <[EMAIL PROTECTED]> wrote:
> Michel Hoogervorst wrote:
>
>
>> Yugandhar,
>>
>> In the freq.py file of Freevo 1.7 I see this:
>>
>> CHANLIST = {
>> "us-bcast" : dict(NTSC_BCAST),
>> "us-cable" : dict(NTSC_CABLE),
>> "us-cable-hrc" : dict(NTSC_HRC),
>> "japan-bcast" : dict(NTSC_BCAST_JP),
>> "japan-cable" : dict(NTSC_CABLE_JP),
>> "europe-west" : dict(PAL_EUROPE),
>> "europe-east" : dict(PAL_EUROPE_EAST),
>> "italy": dict(PAL_ITALY),
>> "newzealand" : dict(PAL_NEWZEALAND),
>> "australia": dict(PAL_AUSTRALIA),
>> "ireland" : dict(PAL_IRELAND),
>> "france" : dict(SECAM_FRANCE),
>> "china-bcast" : dict(PAL_CHINA),
>> "canada-cable" : dict(NTSC_CABLE_CAN),
>> "southafrica" : dict(PAL_BCAST_ZA),
>> "argentina": dict(ARGENTINA),
>> "russia" : dict(RUSSIA),
>> "switzerland" : dict(PAL_SWITZERLAND),
>> }
>>
>> As you can see, India is not in this list, so you will have to add the
>> frequencies for all channels in India yourself in this file. As far
>> as I know, there is no easier way to do this...
>>
>> Then again, editing the freq.py file is not that hard, you just have
>> to know at which frequencies your channels are.
>>
>>
>>
>> Michel
>>
>>
>> 2007/6/7, Yugandhar G.V <[EMAIL PROTECTED]>:
>>
>>
>>
>>> Hi Michel,
>>>
>>> Thanks for your reply. You mean to say that I have to made
>>> frequencies list provided by cable operator. If I am using the antenna
>>> to
>>> tune the card how can I go about it. I am from India so what I have to
>>> put
>>> in the chanlist my card is for PAL i.e in the place of us-cable what I
>>> have
>>> to edit. Is there is any way to scan the channels. Please reply me.
>>>
>>>
>>>
>>> Regards,
>>>
>>> Yugandhar.
>>>
>>>
>>>
> Hi Yugandbar,
>
> I think you will have to do this. There's a program that comes with
> xawtv called scantv that might help. If you run this it should report
> back the channel id and frequency which you can then use to edit freq.py
> When you do get it running it would be great if you could submit a patch
> to freq.py with the channels for India so others won't have to go
> through this again.
>
> John
>
> -
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> ___
> Freevo-users mailing list
> Freevo-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
>
>
Be smarter than spam. See how smart SpamGuard is at giving junk
email the boot with the
>>> All-new Yahoo! Mail at http://mrd.mail.yahoo.com/try_beta?.intl=ca
>>>
--
Re: [Freevo-users] Regarding chanlist in freevo.conf
:) Sorry Jody I didn't realise at a glance that it was you.
Jody Gugelhupf wrote:
> will do, though atm i'm still working on the vlc live tv stream wiki, after
> that i will get to
> that :)
> --- John Molohan <[EMAIL PROTECTED]> wrote:
>
>
>> Hi Jody,
>>
>> If you submit a patch for freq.py and/or update the wiki entry at
>> http://freevo.sourceforge.net/cgi-bin/doc/AnalogueGen that'd help.
>>
>> Thanks,
>>
>> John
>>
>> Jody Gugelhupf wrote:
>>
>>> hi ppl,
>>> well used scan-tv to get the chans for the netherlands, as actually the
>>> frequencies are
>>>
>> different
>>
>>> here in the regions of the netherlands, the same is true for e.g. turkey,
>>> and of course i
>>>
>> added
>>
>>> some channels which i broadcast myself in the dorm, and a vcr chan, camera
>>> chan etc... so u
>>>
>> can
>>
>>> just better add the stuff manually in the local_conf.py also tvtime has a
>>> scanner for
>>>
>> frequencies,
>>
>>> which you can use... or of course most TV providers have a list of
>>> available chans with
>>> frequencies online, which you can just enter manually, u might have to
>>> convert them though...
>>>
>> good
>>
>>> luck
>>> :)
>>>
>>> --- John Molohan <[EMAIL PROTECTED]> wrote:
>>>
>>>
>>>
Michel Hoogervorst wrote:
> Yugandhar,
>
> In the freq.py file of Freevo 1.7 I see this:
>
> CHANLIST = {
> "us-bcast" : dict(NTSC_BCAST),
> "us-cable" : dict(NTSC_CABLE),
> "us-cable-hrc" : dict(NTSC_HRC),
> "japan-bcast" : dict(NTSC_BCAST_JP),
> "japan-cable" : dict(NTSC_CABLE_JP),
> "europe-west" : dict(PAL_EUROPE),
> "europe-east" : dict(PAL_EUROPE_EAST),
> "italy": dict(PAL_ITALY),
> "newzealand" : dict(PAL_NEWZEALAND),
> "australia": dict(PAL_AUSTRALIA),
> "ireland" : dict(PAL_IRELAND),
> "france" : dict(SECAM_FRANCE),
> "china-bcast" : dict(PAL_CHINA),
> "canada-cable" : dict(NTSC_CABLE_CAN),
> "southafrica" : dict(PAL_BCAST_ZA),
> "argentina": dict(ARGENTINA),
> "russia" : dict(RUSSIA),
> "switzerland" : dict(PAL_SWITZERLAND),
> }
>
> As you can see, India is not in this list, so you will have to add the
> frequencies for all channels in India yourself in this file. As far
> as I know, there is no easier way to do this...
>
> Then again, editing the freq.py file is not that hard, you just have
> to know at which frequencies your channels are.
>
>
>
> Michel
>
>
> 2007/6/7, Yugandhar G.V <[EMAIL PROTECTED]>:
>
>
>
>> Hi Michel,
>>
>> Thanks for your reply. You mean to say that I have to made
>> frequencies list provided by cable operator. If I am using the antenna to
>> tune the card how can I go about it. I am from India so what I have to
>> put
>> in the chanlist my card is for PAL i.e in the place of us-cable what I
>> have
>> to edit. Is there is any way to scan the channels. Please reply me.
>>
>>
>>
>> Regards,
>>
>> Yugandhar.
>>
>>
>>
Hi Yugandbar,
I think you will have to do this. There's a program that comes with
xawtv called scantv that might help. If you run this it should report
back the channel id and frequency which you can then use to edit freq.py
When you do get it running it would be great if you could submit a patch
to freq.py with the channels for India so others won't have to go
through this again.
John
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
___
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
>>>
>>> Be smarter than spam. See how smart SpamGuard is at giving junk email
>>> the boot with the
>>>
>> All-new Yahoo! Mail at http://mrd.mail.yahoo.com/try_beta?.intl=ca
>>
>>> -
>>> This SF.net email is sponsored by DB2 Express
>>> Download DB2 Express C - the FREE version of DB2 express and take
>>> control of your XML. No limits. Just data. Click to get it now.
>>> http://sourceforge.net/powerbar/db2/
>>> ___
>>> Freevo-users mailing list
>>> Freevo-users@li
Re: [Freevo-users] Regarding chanlist in freevo.conf
will do, though atm i'm still working on the vlc live tv stream wiki, after
that i will get to
that :)
--- John Molohan <[EMAIL PROTECTED]> wrote:
> Hi Jody,
>
> If you submit a patch for freq.py and/or update the wiki entry at
> http://freevo.sourceforge.net/cgi-bin/doc/AnalogueGen that'd help.
>
> Thanks,
>
> John
>
> Jody Gugelhupf wrote:
> > hi ppl,
> > well used scan-tv to get the chans for the netherlands, as actually the
> > frequencies are
> different
> > here in the regions of the netherlands, the same is true for e.g. turkey,
> > and of course i
> added
> > some channels which i broadcast myself in the dorm, and a vcr chan, camera
> > chan etc... so u
> can
> > just better add the stuff manually in the local_conf.py also tvtime has a
> > scanner for
> frequencies,
> > which you can use... or of course most TV providers have a list of
> > available chans with
> > frequencies online, which you can just enter manually, u might have to
> > convert them though...
> good
> > luck
> > :)
> >
> > --- John Molohan <[EMAIL PROTECTED]> wrote:
> >
> >
> >> Michel Hoogervorst wrote:
> >>
> >>> Yugandhar,
> >>>
> >>> In the freq.py file of Freevo 1.7 I see this:
> >>>
> >>> CHANLIST = {
> >>> "us-bcast" : dict(NTSC_BCAST),
> >>> "us-cable" : dict(NTSC_CABLE),
> >>> "us-cable-hrc" : dict(NTSC_HRC),
> >>> "japan-bcast" : dict(NTSC_BCAST_JP),
> >>> "japan-cable" : dict(NTSC_CABLE_JP),
> >>> "europe-west" : dict(PAL_EUROPE),
> >>> "europe-east" : dict(PAL_EUROPE_EAST),
> >>> "italy": dict(PAL_ITALY),
> >>> "newzealand" : dict(PAL_NEWZEALAND),
> >>> "australia": dict(PAL_AUSTRALIA),
> >>> "ireland" : dict(PAL_IRELAND),
> >>> "france" : dict(SECAM_FRANCE),
> >>> "china-bcast" : dict(PAL_CHINA),
> >>> "canada-cable" : dict(NTSC_CABLE_CAN),
> >>> "southafrica" : dict(PAL_BCAST_ZA),
> >>> "argentina": dict(ARGENTINA),
> >>> "russia" : dict(RUSSIA),
> >>> "switzerland" : dict(PAL_SWITZERLAND),
> >>> }
> >>>
> >>> As you can see, India is not in this list, so you will have to add the
> >>> frequencies for all channels in India yourself in this file. As far
> >>> as I know, there is no easier way to do this...
> >>>
> >>> Then again, editing the freq.py file is not that hard, you just have
> >>> to know at which frequencies your channels are.
> >>>
> >>>
> >>>
> >>> Michel
> >>>
> >>>
> >>> 2007/6/7, Yugandhar G.V <[EMAIL PROTECTED]>:
> >>>
> >>>
> Hi Michel,
>
> Thanks for your reply. You mean to say that I have to made
> frequencies list provided by cable operator. If I am using the antenna to
> tune the card how can I go about it. I am from India so what I have to
> put
> in the chanlist my card is for PAL i.e in the place of us-cable what I
> have
> to edit. Is there is any way to scan the channels. Please reply me.
>
>
>
> Regards,
>
> Yugandhar.
>
>
> >> Hi Yugandbar,
> >>
> >> I think you will have to do this. There's a program that comes with
> >> xawtv called scantv that might help. If you run this it should report
> >> back the channel id and frequency which you can then use to edit freq.py
> >> When you do get it running it would be great if you could submit a patch
> >> to freq.py with the channels for India so others won't have to go
> >> through this again.
> >>
> >> John
> >>
> >> -
> >> This SF.net email is sponsored by DB2 Express
> >> Download DB2 Express C - the FREE version of DB2 express and take
> >> control of your XML. No limits. Just data. Click to get it now.
> >> http://sourceforge.net/powerbar/db2/
> >> ___
> >> Freevo-users mailing list
> >> Freevo-users@lists.sourceforge.net
> >> https://lists.sourceforge.net/lists/listinfo/freevo-users
> >>
> >>
> >
> >
> >
> > Be smarter than spam. See how smart SpamGuard is at giving junk email
> > the boot with the
> All-new Yahoo! Mail at http://mrd.mail.yahoo.com/try_beta?.intl=ca
> >
> >
> > -
> > This SF.net email is sponsored by DB2 Express
> > Download DB2 Express C - the FREE version of DB2 express and take
> > control of your XML. No limits. Just data. Click to get it now.
> > http://sourceforge.net/powerbar/db2/
> > ___
> > Freevo-users mailing list
> > Freevo-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/freevo-users
> >
>
>
> --
> John Molohan
>
> IT Manager
> Griffith College Dublin
> South Circular Road
> Dublin 8
> Ireland
>
> Phone: +353 1 4163366
> Web:www.it.gcd.ie
>
>
> -
Re: [Freevo-users] Regarding chanlist in freevo.conf
Hi Jody,
If you submit a patch for freq.py and/or update the wiki entry at
http://freevo.sourceforge.net/cgi-bin/doc/AnalogueGen that'd help.
Thanks,
John
Jody Gugelhupf wrote:
> hi ppl,
> well used scan-tv to get the chans for the netherlands, as actually the
> frequencies are different
> here in the regions of the netherlands, the same is true for e.g. turkey, and
> of course i added
> some channels which i broadcast myself in the dorm, and a vcr chan, camera
> chan etc... so u can
> just better add the stuff manually in the local_conf.py also tvtime has a
> scanner for frequencies,
> which you can use... or of course most TV providers have a list of available
> chans with
> frequencies online, which you can just enter manually, u might have to
> convert them though... good
> luck
> :)
>
> --- John Molohan <[EMAIL PROTECTED]> wrote:
>
>
>> Michel Hoogervorst wrote:
>>
>>> Yugandhar,
>>>
>>> In the freq.py file of Freevo 1.7 I see this:
>>>
>>> CHANLIST = {
>>> "us-bcast" : dict(NTSC_BCAST),
>>> "us-cable" : dict(NTSC_CABLE),
>>> "us-cable-hrc" : dict(NTSC_HRC),
>>> "japan-bcast" : dict(NTSC_BCAST_JP),
>>> "japan-cable" : dict(NTSC_CABLE_JP),
>>> "europe-west" : dict(PAL_EUROPE),
>>> "europe-east" : dict(PAL_EUROPE_EAST),
>>> "italy": dict(PAL_ITALY),
>>> "newzealand" : dict(PAL_NEWZEALAND),
>>> "australia": dict(PAL_AUSTRALIA),
>>> "ireland" : dict(PAL_IRELAND),
>>> "france" : dict(SECAM_FRANCE),
>>> "china-bcast" : dict(PAL_CHINA),
>>> "canada-cable" : dict(NTSC_CABLE_CAN),
>>> "southafrica" : dict(PAL_BCAST_ZA),
>>> "argentina": dict(ARGENTINA),
>>> "russia" : dict(RUSSIA),
>>> "switzerland" : dict(PAL_SWITZERLAND),
>>> }
>>>
>>> As you can see, India is not in this list, so you will have to add the
>>> frequencies for all channels in India yourself in this file. As far
>>> as I know, there is no easier way to do this...
>>>
>>> Then again, editing the freq.py file is not that hard, you just have
>>> to know at which frequencies your channels are.
>>>
>>>
>>>
>>> Michel
>>>
>>>
>>> 2007/6/7, Yugandhar G.V <[EMAIL PROTECTED]>:
>>>
>>>
Hi Michel,
Thanks for your reply. You mean to say that I have to made
frequencies list provided by cable operator. If I am using the antenna to
tune the card how can I go about it. I am from India so what I have to put
in the chanlist my card is for PAL i.e in the place of us-cable what I have
to edit. Is there is any way to scan the channels. Please reply me.
Regards,
Yugandhar.
>> Hi Yugandbar,
>>
>> I think you will have to do this. There's a program that comes with
>> xawtv called scantv that might help. If you run this it should report
>> back the channel id and frequency which you can then use to edit freq.py
>> When you do get it running it would be great if you could submit a patch
>> to freq.py with the channels for India so others won't have to go
>> through this again.
>>
>> John
>>
>> -
>> This SF.net email is sponsored by DB2 Express
>> Download DB2 Express C - the FREE version of DB2 express and take
>> control of your XML. No limits. Just data. Click to get it now.
>> http://sourceforge.net/powerbar/db2/
>> ___
>> Freevo-users mailing list
>> Freevo-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/freevo-users
>>
>>
>
>
>
> Be smarter than spam. See how smart SpamGuard is at giving junk email
> the boot with the All-new Yahoo! Mail at
> http://mrd.mail.yahoo.com/try_beta?.intl=ca
>
>
> -
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> ___
> Freevo-users mailing list
> Freevo-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
--
John Molohan
IT Manager
Griffith College Dublin
South Circular Road
Dublin 8
Ireland
Phone: +353 1 4163366
Web:www.it.gcd.ie
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
___
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Regarding chanlist in freevo.conf
hi ppl,
well used scan-tv to get the chans for the netherlands, as actually the
frequencies are different
here in the regions of the netherlands, the same is true for e.g. turkey, and
of course i added
some channels which i broadcast myself in the dorm, and a vcr chan, camera chan
etc... so u can
just better add the stuff manually in the local_conf.py also tvtime has a
scanner for frequencies,
which you can use... or of course most TV providers have a list of available
chans with
frequencies online, which you can just enter manually, u might have to convert
them though... good
luck
:)
--- John Molohan <[EMAIL PROTECTED]> wrote:
> Michel Hoogervorst wrote:
> > Yugandhar,
> >
> > In the freq.py file of Freevo 1.7 I see this:
> >
> > CHANLIST = {
> > "us-bcast" : dict(NTSC_BCAST),
> > "us-cable" : dict(NTSC_CABLE),
> > "us-cable-hrc" : dict(NTSC_HRC),
> > "japan-bcast" : dict(NTSC_BCAST_JP),
> > "japan-cable" : dict(NTSC_CABLE_JP),
> > "europe-west" : dict(PAL_EUROPE),
> > "europe-east" : dict(PAL_EUROPE_EAST),
> > "italy": dict(PAL_ITALY),
> > "newzealand" : dict(PAL_NEWZEALAND),
> > "australia": dict(PAL_AUSTRALIA),
> > "ireland" : dict(PAL_IRELAND),
> > "france" : dict(SECAM_FRANCE),
> > "china-bcast" : dict(PAL_CHINA),
> > "canada-cable" : dict(NTSC_CABLE_CAN),
> > "southafrica" : dict(PAL_BCAST_ZA),
> > "argentina": dict(ARGENTINA),
> > "russia" : dict(RUSSIA),
> > "switzerland" : dict(PAL_SWITZERLAND),
> > }
> >
> > As you can see, India is not in this list, so you will have to add the
> > frequencies for all channels in India yourself in this file. As far
> > as I know, there is no easier way to do this...
> >
> > Then again, editing the freq.py file is not that hard, you just have
> > to know at which frequencies your channels are.
> >
> >
> >
> > Michel
> >
> >
> > 2007/6/7, Yugandhar G.V <[EMAIL PROTECTED]>:
> >
> >>
> >>
> >> Hi Michel,
> >>
> >> Thanks for your reply. You mean to say that I have to made
> >> frequencies list provided by cable operator. If I am using the antenna to
> >> tune the card how can I go about it. I am from India so what I have to put
> >> in the chanlist my card is for PAL i.e in the place of us-cable what I have
> >> to edit. Is there is any way to scan the channels. Please reply me.
> >>
> >>
> >>
> >> Regards,
> >>
> >> Yugandhar.
> >>
> Hi Yugandbar,
>
> I think you will have to do this. There's a program that comes with
> xawtv called scantv that might help. If you run this it should report
> back the channel id and frequency which you can then use to edit freq.py
> When you do get it running it would be great if you could submit a patch
> to freq.py with the channels for India so others won't have to go
> through this again.
>
> John
>
> -
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> ___
> Freevo-users mailing list
> Freevo-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
Be smarter than spam. See how smart SpamGuard is at giving junk email the
boot with the All-new Yahoo! Mail at http://mrd.mail.yahoo.com/try_beta?.intl=ca
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
___
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Regarding chanlist in freevo.conf
Michel Hoogervorst wrote:
> Yugandhar,
>
> In the freq.py file of Freevo 1.7 I see this:
>
> CHANLIST = {
> "us-bcast" : dict(NTSC_BCAST),
> "us-cable" : dict(NTSC_CABLE),
> "us-cable-hrc" : dict(NTSC_HRC),
> "japan-bcast" : dict(NTSC_BCAST_JP),
> "japan-cable" : dict(NTSC_CABLE_JP),
> "europe-west" : dict(PAL_EUROPE),
> "europe-east" : dict(PAL_EUROPE_EAST),
> "italy": dict(PAL_ITALY),
> "newzealand" : dict(PAL_NEWZEALAND),
> "australia": dict(PAL_AUSTRALIA),
> "ireland" : dict(PAL_IRELAND),
> "france" : dict(SECAM_FRANCE),
> "china-bcast" : dict(PAL_CHINA),
> "canada-cable" : dict(NTSC_CABLE_CAN),
> "southafrica" : dict(PAL_BCAST_ZA),
> "argentina": dict(ARGENTINA),
> "russia" : dict(RUSSIA),
> "switzerland" : dict(PAL_SWITZERLAND),
> }
>
> As you can see, India is not in this list, so you will have to add the
> frequencies for all channels in India yourself in this file. As far
> as I know, there is no easier way to do this...
>
> Then again, editing the freq.py file is not that hard, you just have
> to know at which frequencies your channels are.
>
>
>
> Michel
>
>
> 2007/6/7, Yugandhar G.V <[EMAIL PROTECTED]>:
>
>>
>>
>> Hi Michel,
>>
>> Thanks for your reply. You mean to say that I have to made
>> frequencies list provided by cable operator. If I am using the antenna to
>> tune the card how can I go about it. I am from India so what I have to put
>> in the chanlist my card is for PAL i.e in the place of us-cable what I have
>> to edit. Is there is any way to scan the channels. Please reply me.
>>
>>
>>
>> Regards,
>>
>> Yugandhar.
>>
Hi Yugandbar,
I think you will have to do this. There's a program that comes with
xawtv called scantv that might help. If you run this it should report
back the channel id and frequency which you can then use to edit freq.py
When you do get it running it would be great if you could submit a patch
to freq.py with the channels for India so others won't have to go
through this again.
John
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
___
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Regarding chanlist in freevo.conf
Yugandhar,
In the freq.py file of Freevo 1.7 I see this:
CHANLIST = {
"us-bcast" : dict(NTSC_BCAST),
"us-cable" : dict(NTSC_CABLE),
"us-cable-hrc" : dict(NTSC_HRC),
"japan-bcast" : dict(NTSC_BCAST_JP),
"japan-cable" : dict(NTSC_CABLE_JP),
"europe-west" : dict(PAL_EUROPE),
"europe-east" : dict(PAL_EUROPE_EAST),
"italy": dict(PAL_ITALY),
"newzealand" : dict(PAL_NEWZEALAND),
"australia": dict(PAL_AUSTRALIA),
"ireland" : dict(PAL_IRELAND),
"france" : dict(SECAM_FRANCE),
"china-bcast" : dict(PAL_CHINA),
"canada-cable" : dict(NTSC_CABLE_CAN),
"southafrica" : dict(PAL_BCAST_ZA),
"argentina": dict(ARGENTINA),
"russia" : dict(RUSSIA),
"switzerland" : dict(PAL_SWITZERLAND),
}
As you can see, India is not in this list, so you will have to add the
frequencies for all channels in India yourself in this file. As far
as I know, there is no easier way to do this...
Then again, editing the freq.py file is not that hard, you just have
to know at which frequencies your channels are.
Michel
2007/6/7, Yugandhar G.V <[EMAIL PROTECTED]>:
>
>
>
>
> Hi Michel,
>
> Thanks for your reply. You mean to say that I have to made
> frequencies list provided by cable operator. If I am using the antenna to
> tune the card how can I go about it. I am from India so what I have to put
> in the chanlist my card is for PAL i.e in the place of us-cable what I have
> to edit. Is there is any way to scan the channels. Please reply me.
>
>
>
> Regards,
>
> Yugandhar.
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
___
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Regarding chanlist in freevo.conf
Hi Michel, Thanks for your reply. You mean to say that I have to made frequencies list provided by cable operator. If I am using the antenna to tune the card how can I go about it. I am from India so what I have to put in the chanlist my card is for PAL i.e in the place of us-cable what I have to edit. Is there is any way to scan the channels. Please reply me. Regards, Yugandhar. _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michel Hoogervorst Sent: Wednesday, June 06, 2007 8:19 PM To: freevo-users@lists.sourceforge.net Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf Hi, The frequency tables are set in /usr/lib/python-2.x/site-packages/freevo/tv/freq.py. Myself I made a new entry for the specific frequencies of my cable provider in this, and configured chanlist=mycalbeprovider in my freevo.conf. Michel 2007/6/6, Yugandhar G.V <[EMAIL PROTECTED]>: Hi , I am from India I have Hauppauge PVR-350 and installed freevo successfully. I am using Fedora Core 4.As from the documentation of configuring freevo for analog TV you have given the following to be edited in freevo.conf file Chanlist=IRELAND TV=pal I want to know what I have to put here I am using freevo with Hauppauge PVR-350 in India and also I want to know how to scan the channels using freevo. Finally am I required to install XMLTV too for watching TV. Regards, Yugandhar G.V. - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Regarding chanlist in freevo.conf
Hi, And you have to install xmltv so you can populate the tv-guide and watch/record a show. (Correct me if I'm wrong) Greets, Frank _ Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Michel Hoogervorst Verzonden: woensdag 6 juni 2007 16:49 Aan: freevo-users@lists.sourceforge.net Onderwerp: Re: [Freevo-users] Regarding chanlist in freevo.conf Hi, The frequency tables are set in /usr/lib/python-2.x/site-packages/freevo/tv/freq.py. Myself I made a new entry for the specific frequencies of my cable provider in this, and configured chanlist=mycalbeprovider in my freevo.conf. Michel 2007/6/6, Yugandhar G.V <[EMAIL PROTECTED]>: Hi , I am from India I have Hauppauge PVR-350 and installed freevo successfully. I am using Fedora Core 4.As from the documentation of configuring freevo for analog TV you have given the following to be edited in freevo.conf file Chanlist=IRELAND TV=pal I want to know what I have to put here I am using freevo with Hauppauge PVR-350 in India and also I want to know how to scan the channels using freevo. Finally am I required to install XMLTV too for watching TV. Regards, Yugandhar G.V. - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] Regarding chanlist in freevo.conf
Hi, The frequency tables are set in /usr/lib/python-2.x /site-packages/freevo/tv/freq.py. Myself I made a new entry for the specific frequencies of my cable provider in this, and configured chanlist=mycalbeprovider in my freevo.conf. Michel 2007/6/6, Yugandhar G.V <[EMAIL PROTECTED]>: Hi , I am from India I have Hauppauge PVR-350 and installed freevo successfully. I am using Fedora Core 4.As from the documentation of configuring freevo for analog TV you have given the following to be edited in freevo.conf file Chanlist=IRELAND TV=pal I want to know what I have to put here I am using freevo with Hauppauge PVR-350 in India and also I want to know how to scan the channels using freevo. Finally am I required to install XMLTV too for watching TV. Regards, Yugandhar G.V. - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] Regarding chanlist in freevo.conf
Hi , I am from India I have Hauppauge PVR-350 and installed freevo successfully. I am using Fedora Core 4.As from the documentation of configuring freevo for analog TV you have given the following to be edited in freevo.conf file Chanlist=IRELAND TV=pal I want to know what I have to put here I am using freevo with Hauppauge PVR-350 in India and also I want to know how to scan the channels using freevo. Finally am I required to install XMLTV too for watching TV. Regards, Yugandhar G.V. - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
