Re: [gentoo-user] where is my /dev/cdrom using UDEV
gt-dell root # dmesg |grep ^hdhdc: SAMSUNG SC-140B, ATAPI CD/DVD-ROM drivegt-dell root # lf /dev/hd*ls: /dev/hd*: No such file or directoryI don't know why /dev/hdc does not exist.thanks,
WenjuOn 4/27/05, Robert S <[EMAIL PROTECTED]> wrote:
Try$ dmeg | grep ^hdand look for the CDROM drive. If this fails, try dmesg |less and lookfor it in the entire output.On 4/27/05, Wenju Zhang <[EMAIL PROTECTED]
> wrote:> I have try this. but the problem remains.> There is not /dev/hdc at all in my machine.>> thanks> zwj On 4/26/05, Robert S <
[EMAIL PROTECTED]>> wrote:> >> > Try this:> >> > Create a file called /etc/udev/rules.d/10- udev.rules> >> > Insert the following in the file
> >> > BUS="pci", KERNEL="hdc", SYSFS{vendor}="0x10de", NAME="%k",> > SYMLINK="cdrom cdroms/cdrom%n"> >> > You'll need to change the SYSFS{vendor} statement and you'll probably
> > need to reboot.> >> > There's a HOWTO in the gentoo docs on udev - and a very useful link on> > creating rules.> >> >> > On 4/26/05, Wenju Zhang <
[EMAIL PROTECTED]> wrote:> > > I have install gentoo 2005.0 with udev (without devfs) following> > > the gentoo udev guide,> > >
http://www.gentoo.org/doc/en/udev-guide.xml> > > and http://gentoo-wiki.com/HOWTO_Migrate_to_UDEV> > >> > > I can't find the /dev/cdrom.
> > >> > > FYI> > >> > > gt-dell rules.d # dmesg |grep hdc> > > Kernel command line: hdc=ide-cd ro> > > ide_setup: hdc=ide-cd> > > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
> > > hdc: SAMSUNG SC-140B, ATAPI CD/DVD-ROM drive> > >> > >> > > help me, please.> > >> > > Thanks in advance.> > >> > > zwj
> > >> >> > --> > gentoo-user@gentoo.org mailing list> >> >>>--
gentoo-user@gentoo.org mailing list
Re: [gentoo-user] where is my /dev/cdrom using UDEV
On Thu, 28 Apr 2005 15:18:57 +0800, Wenju Zhang wrote: > gt-dell root # lf /dev/hd* > ls: /dev/hd*: No such file or directory > > I don't know why /dev/hdc does not exist. Do you have CONFIG_BLK_DEV_IDECD enabled in your kernel? -- Neil Bothwick What is the difference between Mechanical Engineers and Civil Engineers? Mechanical Engineers build weapons, Civil Engineers build targets. pgpluAaCdvnF1.pgp Description: PGP signature
[gentoo-user] USB Mass Storage Device with Gentoo Kernel 2.6.11
Hi NG, I try to get my external USB2.0 HDD working with my Gentoo-System with Kernel 2.6.11-r6. With Knoppix 3.3 there are no problems, there it is working good. But not with Gentoo! An USB stick which I also connect to my System works fine with my self-compiled kernel. The stick is on /dev/sda, and I use udev to use it as /dev/usbstick. I compiled all Modules for USB Storage into the kernel, also ohci, uhci and ehci. I have no USB2.0 support on my Mainboard (only USB1.1), so I plugged a PCI-Card with USB2.0-support into my System. When I connect the external storage to my computer /var/log/messages syas: Apr 27 19:50:44 neon usb 5-2: new high speed USB device using ehci_hcd and address 25 But there is no /dev/sdb (or /dev/sda if the stick is not connected) so udevinfo -a -p /sys/block/sdb gives no infos. Anybody any idea? How can I figure out what "thing" is diffrent between the Knoppix 3.3 kernel and my self-compiled kernel? Daniel Röder -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] USB Mass Storage Device with Gentoo Kernel 2.6.11
On Thu, 28 Apr 2005 10:10:00 +0200, Daniel Röder wrote: > Anybody any idea? How can I figure out what "thing" is diffrent between > the Knoppix 3.3 kernel and my self-compiled kernel? If Knoppix running with a 2.4 or 2.6 krnel? If it is 2.6 you may be able to save the kernel config with zcat /proc/config.gz >somefile Then compare it with your Gentoo config. Alternatively, do "tail -f /var/log/messages" while plugging the device in on Knopppix to see which modules are loaded. Comparing the output of lsmod before and after, and with the same on Gentoo, may also reveal some useful information. -- Neil Bothwick If it's tourist season, why can't we shoot them? pgpsod0rg3UUh.pgp Description: PGP signature
[gentoo-user] Emerge -C doesn't clean up /etc/ config files
Is this a feature or a bug? It seems that emerge -C will not remove any altered files from /etc/ once it has been changed. This really leaves some cruft in my /etc/ Is this due to config-protect or is it something else?? -- Ow Mun Heng Gentoo/Linux on DELL D600 1.4Ghz 98% Microsoft(tm) Free!! Neuromancer 16:24:30 up 2 days, 7:04, 6 users, load average: 0.61, 0.40, 0.41 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] intel 6300esb onboard raid
Claudinei Matos schrieb: Hi guys, I'm own a Intel se7210tp1-e with a onboard Intel 6300ESB Raid Controller w/ two 80GB disks Well, I'm new to this hardware RAID things. My doubt is the follow: I've booted gentoo 2005.0 live-cd and when I typed "fdisk -l" I've got two disks printed: sda and sdb If your raid shows both drives under linux, instead of one drive, then it is not a true hardware raid. It is then a hardware raid which need os software support for the raid function. SATA raid is a little strange with kernel 2.6 and gentoo doesn't seem to fully support it yet. As of kernel 2.6 there is a new block device manager called "device mapper". The device mapper is used to support this type of raid controler. Using a tool called "dmraid" you can have the RAID information read out of the disks, and dmraid will construct the device mapper devices which allow you to use the raid as such. After booting a 2005.0 livecd, you can check to see if running "dmsetup ls" shows you a raid device. If so, then the dmraid command and device mapper on the 2005.0 livdcd supports your controler. The dmraid on the 2005.0 livecd has some know problems. The version on the cd is 1.0.0.rc6. Specifically, sometimes it shows the capacitly of RAID 1 devices being less then what it is. Usually by a factor of two. ie 2 x 80GB in RAID 1 makes 80GB, however you end up with only 40GB in your raid. If this is the case, you can't simply use the normal livecd to install. There is a newer version of the "dmraid" tool. (1.0.0.rc7) which however fixes this. Look at the following links for help. http://tienstra4.flatnet.tudelft.nl/~gerte/gen2dmraid/ http://forums.gentoo.org/viewtopic-t-258981.html If you have a controler which has the about problem with RAID 1, let me know. I already have my own livecd which fixes this. Good Luck! -Scott -- gentoo-user@gentoo.org mailing list
[gentoo-user] What happened to nautilus Scripts??
Is There such a thing left?? it used to be that we can select a file, right click on it and then select which script we want to execute it with. (shred comes to mind, rather than go to the cli) -- Ow Mun Heng Gentoo/Linux on DELL D600 1.4Ghz 98% Microsoft(tm) Free!! Neuromancer 16:33:47 up 2 days, 7:14, 6 users, load average: 0.26, 0.43, 0.42 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] WARNING: /etc removed from CONFIG_PROTECT portage-2.0.51.20
Michael W. Holdeman wrote: On Tuesday 26 April 2005 04:19 am, Neil Bothwick wrote: On Tue, 26 Apr 2005 00:02:36 +0100, Neil Bothwick wrote: Today it is calling for 2.0.51.20-r4, any problems here? not any more. It did stop emerge working altogether on two computers here, but resyncing and re-emerging it seemed to fix the problem (I noticed the USE flags for portage had changed after the resync). Update. r4 stopped working again. The fix is available from http://bugs.gentoo.org/attachment.cgi?id=57171&action=view is -r5 ok? Mike ya -r5 , -r6 should be fixed by now Taka John Brunkhorst -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Samba start error
On 4/28/05, Richard Watson <[EMAIL PROTECTED]> wrote: > When Samba starts I get the error "lpstat: Unable to connect to server: > Connection refused". It actually doesn't seem to affect much as I can see > the shares I've created but I'm curious. Thanks, Richard This has to do with the printing support of samba, your smb.conf is probably configured to share printers as well as files, and when samba tries to access the print spooler to find out what printers are available it fails to connect. Samba regards this as non-fatal as it can still provide useful services by sharing files and directories. You should be able to find more information about samba's printing support in their HOWTO or FAQ documents. Regards, Andreas -- gentoo-user@gentoo.org mailing list
[gentoo-user] Error when trying to emerge openldap-2.1.30-r4
Hi all, When trying to install openldap-2.1.30-r4 I get the following errors. I guess its something to do with perl, but im running the latest perl (just re-installed it to make sure) and have done the lib update for perl. Any clues? cc -O2 -march=pentium3 -pipe .libs/slapdS.o -o .libs/slapd main.o daemon.o connection.o search.o filter.o add.o cr.o attr.o entry.o config.o backend.o result.o operation.o dn.o compare.o modify.o delete.o modrdn.o ch_malloc.o value.o ava.o bind.o unbind.o abandon.o filterentry.o phonetic.o acl.o str2filter.o aclparse.o init.o user.o repl.o lock.o controls.o extended.o kerberos.o passwd.o schema.o schema_check.o schema_init.o schema_prep.o schemaparse.o ad.o at.o mr.o syntax.o oc.o saslauthz.o oidm.o starttls.o index.o sets.o referral.o root_dse.o sasl.o module.o mra.o mods.o limits.o backglue.o operational.o matchedValues.o cancel.o version.o -rdynamic -pthread -Wl,--export-dynamic libbackends.a ../../libraries/libavl/libavl.a ../../libraries/libldbm/libldbm.a ../../libraries/liblunicode/liblunicode.a ../../libraries/librewrite/librewrite.a ../../libraries/libldif/libldif.a ../../libraries/liblutil/liblutil.a ../../libraries/libldap_r/.libs/libldap_r.so /var/tmp/portage/openldap-2.1.30-r4/work/openldap-2.1.30/libraries/liblber/.libs/liblber.so ../../libraries/liblber/.libs/liblber.so /usr/lib/libdb-4.1.so -L/usr/local/lib /usr/lib/perl5/5.8.5/i686-linux-thread-multi/auto/DynaLoader/DynaLoader.a -L/usr/lib/perl5/5.8.5/i686-linux-thread-multi/CORE -lperl -lpthread -lnsl -lm -lutil -lcrypt -lssl -lcrypto -lresolv /usr/lib/libltdl.so -ldl -lwrap daemon.o(.text+0x113b): In function `slap_open_listener': : warning: `sys_errlist' is deprecated; use `strerror' or `strerror_r' instead daemon.o(.text+0x1132): In function `slap_open_listener': : warning: `sys_nerr' is deprecated; use `strerror' or `strerror_r' instead libbackends.a(perlinit.o)(.text+0x46b): In function `perl_back_db_open': : undefined reference to `Perl_croak_nocontext' libbackends.a(perlmodify.o)(.text+0x4ca): In function `perl_back_modify': : undefined reference to `Perl_croak_nocontext' libbackends.a(perlmodrdn.o)(.text+0x3c1): In function `perl_back_modrdn': : undefined reference to `Perl_croak_nocontext' libbackends.a(perlsearch.o)(.text+0x6be): In function `perl_back_search': : undefined reference to `Perl_croak_nocontext' libbackends.a(perladd.o)(.text+0x2ab): In function `perl_back_add': : undefined reference to `Perl_croak_nocontext' libbackends.a(perlbind.o)(.text+0x2fb): more undefined references to `Perl_croak_nocontext' follow collect2: ld returned 1 exit status make[2]: *** [slapd] Error 1 make[2]: Leaving directory `/var/tmp/portage/openldap-2.1.30-r4/work/openldap-2.1.30/servers/slapd' make[1]: *** [all-common] Error 1 make[1]: Leaving directory `/var/tmp/portage/openldap-2.1.30-r4/work/openldap-2.1.30/servers' make: *** [all-common] Error 1 !!! ERROR: net-nds/openldap-2.1.30-r4 failed. !!! Function src_compile, Line 143, Exitcode 2 !!! make failed !!! If you need support, post the topmost build error, NOT this status message. Thanks Jonathan -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Emerge -C doesn't clean up /etc/ config files
On Thu, 2005-04-28 at 16:25 +0800, Ow Mun Heng wrote: > Is this a feature or a bug? It seems that emerge -C will not remove any > altered files from /etc/ once it has been changed. > > This really leaves some cruft in my /etc/ Is this due to config-protect > or is it something else?? No, portage will not remove any files that have been changed (actually, had their mtime altered) wherever on the filesystem they reside. This is a feature. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] FrameBuffer + Splash & Startx
On Thu, 2005-04-28 at 03:52 +0800, Ow Mun Heng wrote: > It seems that on 2005.0 install, I can't have the 3 of these together > like I did when I was running on 2004.3. > > The difference is the usage of devpts vs udev. > > Since 2005.0 is udev, to get gen/fbsplash to work, I need to pass > vga=7xx to the kernel command line. > > passing > video=vesafb:ywrap,[EMAIL PROTECTED] splash=silent,theme:livecd-2005.0 > > doesn't seem to have any effect at all. I've tried both vesafb as well > as using vesafb-tng and both fails. > > With VGA=7xx passed, I get splash but Freevo won't come up. (and neither > will startx work) as it complains about not being able to find DISPLAY > and default to using fbdev. (On occations in which it does comes up it > doesn't stretch the display to fullscreen!) > > Without the VGA=7xx line, then I don't get the splash screen at all but > freevo will start with no issues. The other thing is that startx will also fail for the same reason. Doesn't anyone has any idea at all?? -- Ow Mun Heng Gentoo/Linux on DELL D600 1.4Ghz 98% Microsoft(tm) Free!! Neuromancer 17:41:37 up 2 days, 8:22, 6 users, load average: 0.87, 0.88, 0.59 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Emerge -C doesn't clean up /etc/ config files
Edward Catmur wrote: > On Thu, 2005-04-28 at 16:25 +0800, Ow Mun Heng wrote: > >>Is this a feature or a bug? It seems that emerge -C will not remove any >>altered files from /etc/ once it has been changed. >> >>This really leaves some cruft in my /etc/ Is this due to config-protect >>or is it something else?? > > > No, portage will not remove any files that have been changed (actually, > had their mtime altered) wherever on the filesystem they reside. > > This is a feature. > Files in /etc are never removed from portage, to force portage remove files under etc you can use : CONFIG_PROTECT_MASK="/etc/init.d" -- . These pages are best viewed by coming to my house and looking at . . my monitor. [S. Lucas Bergman (on his website)]. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] How do I get IPV6 working?
On 02:34 Thu 28 Apr , Walter Dnes wrote: > I've found out "the hard way" that IPV6 does work on the Gentoo LiveCD > via my ISP, notwithstanding my IPV4-only router (must be tunneling of > some sort). I'm trying to get it going on my second machine, but can't > get anywhere. I assume there are some extra configuration details I > need to set. Is there a detailed configuration for IPV6, or a mailing > list? If someone on this group has gotten IPV6 working, tunneling over > IPV4, I'd appreciate the details. > > -- > Walter Dnes <[EMAIL PROTECTED]> > An infinite number of monkeys pounding away on keyboards will > eventually produce a report showing that Windows is more secure, > and has a lower TCO, than linux. > -- > gentoo-user@gentoo.org mailing list Hello, I am using IPv6 over IPv4 at home without any problem. I had to recompile my kernel to enable IPv6 support and add the protocol to /etc/rc.conf: PROTOCOLS="1 2 10" There is a good guide in the gentoo.org documentation about IPv6 [1]. It explains how to set up an IPv6 router but its beginning can also be used for a workstation (kernel, iproute2, applications, etc.) I am using btexact [2] as a tunnel broker because it provides a simple script to configure the tunnel. [1]: http://www.gentoo.org/doc/en/ipv6.xml [2]: https://tb.ipv6.btexact.com/ -- Nicolas Litchinko BOFH Excuse #38: secretary plugged hairdryer into UPS -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Emerge -C doesn't clean up /etc/ config files
On Thu, 2005-04-28 at 10:41 +0100, Edward Catmur wrote: > On Thu, 2005-04-28 at 16:25 +0800, Ow Mun Heng wrote: > > Is this a feature or a bug? It seems that emerge -C will not remove any > > altered files from /etc/ once it has been changed. > > > > This really leaves some cruft in my /etc/ Is this due to config-protect > > or is it something else?? > > No, portage will not remove any files that have been changed (actually, > had their mtime altered) wherever on the filesystem they reside. > Which is what I would expect. But it doesn't seem to the case for me. I installed synergy and then removed it but the conf file was still around. Maybe there's something I'm not doing?? > This is a feature. > -- Ow Mun Heng Gentoo/Linux on DELL D600 1.4Ghz 98% Microsoft(tm) Free!! Neuromancer 17:54:36 up 2 days, 8:35, 6 users, load average: 0.83, 0.50, 0.47 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] What happened to nautilus Scripts??
On Thu, 2005-04-28 at 16:35 +0800, Ow Mun Heng wrote: > Is There such a thing left?? it used to be that we can select a file, > right click on it and then select which script we want to execute it > with. The location is ~/.gnome2/nautilus-scripts, if you had them anywhere else. However, see http://bugs.gentoo.org/show_bug.cgi?id=87719 if you are using nautilus 2.10 - you will need to unmask and install shared-mime-info 0.16. -- gentoo-user@gentoo.org mailing list
[gentoo-user] [OT]Which TV recorder
Hi, I use tvtime for viewing TV. What do you suggest as a simple tv recorder and why? I just want a simple app. to record from-time to-time x-station to an AVI. My card uses bt787. I read about Mythtv, but I don't want to install Mysql if it isn't absolutely required. BTW why Mythtv depends on Mysql? It can not work without it? What Mythtv use it for? TIA. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
[gentoo-user] resume emerge after reboot
Hi, I'd like to do an emerge -e world. It would take 3 days, but I can't sleep next to my machine, 'cause of the sound of the 7000RPM CPU cooler. If I start an emerge, then C-c it, shutdown, start the PC at morning, can I resume the emerge -e? TIA. Cheers, Tamas Sarga Sárga Tamás -- Make the world confused!Zavard össze a világot! Smile on monday morning!Mosolyogj hétfő reggel! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT]Which TV recorder
Tamas Sarga ([EMAIL PROTECTED]) scribbled: > I read about Mythtv, but I don't want to install Mysql if it isn't > absolutely required. BTW why Mythtv depends on Mysql? It can not work > without it? What Mythtv use it for? mythtv uses mysql to keep track of *everything*. Including, but not limited to, program guide, recording schedule, previously recorded shows, configuration, etc. Is there a particular reason you want to avoid mysql? I've been using mythtv for almost two years now. It's a lot easier than trying to brew your own. Especially under gentoo. cooper. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT]Which TV recorder
MythTV is a very useful package for recording TV, and pausing on demand TV (you never know when you'll get that annoying phonecall while watching your favourite program) It needs mySQL to store all its data (TV Listings and whatnot) - it downloads listings from a selection of sites using xmltv and stores them in the database along with other info (channels / what to record etc). Another advantage to myth is you can have the backend on one box, and watch from another over a network. Aswell as mythtv, there is an alternative called Freevo (http://freevo.sourceforge.net/) - I haven't tried this, but from what I gather its very similar to mythtv. Hope that helps you a bit. -- Tim Igoe [EMAIL PROTECTED] http://tim.igoe.me.uk - Personal Site http://tv.igoe.me.uk - UK TV Guide "Computers are like Air-con, open windows and they stop working!" Tamas Sarga wrote: > Hi, > > I use tvtime for viewing TV. What do you suggest as a simple tv > recorder and why? I just want a simple app. to record from-time to-time > x-station to an AVI. My card uses bt787. > I read about Mythtv, but I don't want to install Mysql if it isn't > absolutely required. BTW why Mythtv depends on Mysql? It can not work > without it? What Mythtv use it for? > > TIA. > Cheers, > Tamas Sarga Sárga Tamás > -- > Make the world confused! Zavard össze a világot! > Smile on monday morning! Mosolyogj hétfő reggel! > signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] resume emerge after reboot
On Thursday 28 April 2005 20:20, Tamas Sarga wrote:
> Hi,
>
> I'd like to do an emerge -e world. It would take 3 days, but I can't
> sleep next to my machine, 'cause of the sound of the 7000RPM CPU cooler.
> If I start an emerge, then C-c it, shutdown, start the PC at morning,
> can I resume the emerge -e?
Sure. emerge --resume. --resume functionality is planned to be improved in the
future. However, at the moment emerging something else will kill the record
of the previous emerge. I usually do a quick manual loop for it like this:
# emerge -ep world | grep ebuild | awk '{print "="substr($0, 17)}' > world
# for x in $( world2 &&
mv world2 world || break; done
The second and third lines are one line.
This allows me to stop and emerge something else first if I want to. If
something fails, it also means that I can play around with it until it is
merged without having to use --resume every time. Or you could remove the
"|| break" and have it continue on regardless of failures and you'll have a
list of problems at the end.
Regards,
Jason Stubbs
--
gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Emerge -C doesn't clean up /etc/ config files
On Thursday 28 April 2005 11:55, Ow Mun Heng wrote: > On Thu, 2005-04-28 at 10:41 +0100, Edward Catmur wrote: > > On Thu, 2005-04-28 at 16:25 +0800, Ow Mun Heng wrote: > > > Is this a feature or a bug? It seems that emerge -C will not remove any > > > altered files from /etc/ once it has been changed. > > > > > > This really leaves some cruft in my /etc/ Is this due to config-protect > > > or is it something else?? > > > > No, portage will not remove any files that have been changed (actually, > > had their mtime altered) wherever on the filesystem they reside. > > Which is what I would expect. But it doesn't seem to the case for me. > > I installed synergy and then removed it but the conf file was still > around. > > Maybe there's something I'm not doing?? > > > This is a feature. > from "emerge --help config": In addition to protecting overwritten files, Portage will not delete any files from a protected directory when a package is unmerged. While this may be a little bit untidy, it does prevent potentially valuable config files from being deleted, which is of paramount importance. -- Hans-Gunther Borrmann <[EMAIL PROTECTED]> Rechenzentrum der Universitaet Freiburg Hermann-Herder-Str. 10, D79104 FREIBURG Tel.: +49 761/203-4652 Fax: +49 761/203-4643 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Laptop Internal Modem not recognised
Hi Richard, On 4/28/05, Richard Watson <[EMAIL PROTECTED]> wrote: > Can anyone help? I'm trying to setup a dialup. I guess I need to set a > ttyS?. Is there a command I can run to see if the modem has already been > allocated a ttyS?. Can I suggest you look up your model of your laptop at sites like: http://tuxmobil.org/ http://www.linux-on-laptops.com/ and see if anyone else has already solved it... I went through a period of attempting to get the winmodem working on my Toshie notebook, but got broadband later that month, and didn't bother trying to get it to work. I may try again in the future... 2 other links I can also suggest (that sorta point you in the right direction) are: http://linmodems.technion.ac.il/Linmodem-howto.html http://linmodems.technion.ac.il/resources.html Good luck... I don't envy you... :-) ...Ric -- Ric de France Ph: +61412945554 (international) or 0412945554 (Australia) == Do you, uh... Gentoo? Gent-hooo!! == -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] where is my /dev/cdrom using UDEV
CONFIG_BLK_DEV_IDECD=mI think I configed it as module.# modprobe ide-cdohh, it's ok, thank you very much.On 4/28/05, Neil Bothwick <[EMAIL PROTECTED]> wrote:On Thu, 28 Apr 2005 15:18:57 +0800, Wenju Zhang wrote: > gt-dell root # lf /dev/hd*> ls: /dev/hd*: No such file or directory>> I don't know why /dev/hdc does not exist.Do you have CONFIG_BLK_DEV_IDECD enabled in your kernel?-- Neil BothwickWhat is the difference between Mechanical Engineers and Civil Engineers?Mechanical Engineers build weapons, Civil Engineers build targets.
Re: [gentoo-user] resume emerge after reboot
use software suspend2, just put it to sleep when needed - it will take off again at boot. Much better than "emerge --resume" - especially after a few hours into openoffice ... After trialling it on my laptop, Ive even converted my 24/7 gateway over - can sleep it and restart it faster than a clean boot when needed (passing thunderstorms, expected power outages etc) A much undervalued function! BillK On Thu, 2005-04-28 at 13:20 +0200, Tamas Sarga wrote: > Hi, > > I'd like to do an emerge -e world. It would take 3 days, but I can't > sleep next to my machine, 'cause of the sound of the 7000RPM CPU cooler. > If I start an emerge, then C-c it, shutdown, start the PC at morning, > can I resume the emerge -e? > > TIA. > Cheers, > Tamas Sarga Sárga Tamás > -- > Make the world confused! Zavard össze a világot! > Smile on monday morning! Mosolyogj hétfő reggel! > -- William Kenworthy <[EMAIL PROTECTED]> Home! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Emerge -C doesn't clean up /etc/ config files
On Thu, 28 Apr 2005 10:41:58 +0100 Edward Catmur <[EMAIL PROTECTED]> wrote: | On Thu, 2005-04-28 at 16:25 +0800, Ow Mun Heng wrote: | > Is this a feature or a bug? It seems that emerge -C will not remove | > any altered files from /etc/ once it has been changed. | > | > This really leaves some cruft in my /etc/ Is this due to | > config-protect or is it something else?? | | No, portage will not remove any files that have been changed | (actually, had their mtime altered) wherever on the filesystem they | reside. | | This is a feature. It isn't what's happening here, however. Portage won't unmerge anything that's CONFIG_PROTECTed. Yet another reason /etc/init.d should be added to CONFIG_PROTECT_MASK... -- Ciaran McCreesh : Gentoo Developer (Vim, Fluxbox, shell tools) Mail: ciaranm at gentoo.org Web : http://dev.gentoo.org/~ciaranm pgp5La5pQRkJx.pgp Description: PGP signature
Re: [gentoo-user] Emerge -C doesn't clean up /etc/ config files
On Thursday 28 April 2005 23:24, Ciaran McCreesh wrote: > On Thu, 28 Apr 2005 10:41:58 +0100 Edward Catmur <[EMAIL PROTECTED]> > > wrote: > | On Thu, 2005-04-28 at 16:25 +0800, Ow Mun Heng wrote: > | > Is this a feature or a bug? It seems that emerge -C will not remove > | > any altered files from /etc/ once it has been changed. > | > > | > This really leaves some cruft in my /etc/ Is this due to > | > config-protect or is it something else?? > | > | No, portage will not remove any files that have been changed > | (actually, had their mtime altered) wherever on the filesystem they > | reside. > | > | This is a feature. > > It isn't what's happening here, however. Portage won't unmerge anything > that's CONFIG_PROTECTed. Yet another reason /etc/init.d should be added > to CONFIG_PROTECT_MASK... The goal there is to have a MERGE_PROTECT and UNMERGE_PROTECT or whatever names are chosen. They will essentially do the same as CONFIG_PROTECT but will separate the functionality into install time and uninstall time. The mtime/md5 checks will also be dropped. Instead there'll be a refcount on all known files and the file is removed when the refcount drops to 0. Regards, Jason Stubbs -- gentoo-user@gentoo.org mailing list
[gentoo-user] {OT} LayeredTech.com not Gentoo friendly
I'm trying to sign up with LayeredTech.com but they are rabidly refusing to go through the: 1. boot to LiveCD 2. start networking 3. set passwd 4. start sshd process. They insist I rent a KVM unit from them for $30 per 24 hours. Is this abnormal or do most hosts act this way? I was definitely with a Gentoo-friendly host before. - Grant -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] {OT} LayeredTech.com not Gentoo friendly
On 4/28/05, Grant <[EMAIL PROTECTED]> wrote: > I'm trying to sign up with LayeredTech.com but they are rabidly > refusing to go through the: > > 1. boot to LiveCD > 2. start networking > 3. set passwd > 4. start sshd If there is already a Linux distro installed on the system, you could use the Alternative Installation HOWTO: http://www.gentoo.org/doc/en/altinstall.xml#doc_chap6 IIRC, someone also posted some time ago their method for remotely installing Gentoo from an existing RH install. Matt -- gentoo-user@gentoo.org mailing list
[gentoo-user] .ebuild from mod_bt ?
Anyone to know a .ebuild for mod_bt (torrent tracker) mod_bt http://freshmeat.net/projects/modbt/ -- gentoo-user@gentoo.org mailing list
[gentoo-user] root password from installation
Hello, I was on the installation process of 2005.0 on an x86 box. When i reached the point of rebooting i tried to log in as root but i got an "incorrect password" message. So, what i did was, i rebooted with the universal cd and: o mounted dev/hda1 (boot) && dev/hda3 (root) o chrooted and used passwd to set the password again Though i did this, i tried rebooting and when i tried to log in as root, i got the "incorrect password" message once more. Am i doing something wrong or is there another way of doing it? Thanks. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] PAM error messsages
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 /etc/security/pam_env.conf Comment out all in that config. It was a bug in the ebuilds a while ago (it was in the bugs database, but you will have to search for that yourself if you want to confirm). The solution was I believe to uncomment: REMOTEHOST DEFAULT= [EMAIL PROTECTED] XAUTHORITY DEFAULT= [EMAIL PROTECTED] Just put a # infront and restart sshd. Greetings Ralph Patrick Marquetecken wrote: > with my last computer i have these error when i login, it doens't matter > if its with ssh or local. The machine has no gui installed. > > Apr 27 09:05:47 localhost PAM-env[18418]: Unknown PAM_ITEM: > Apr 27 09:05:47 localhost sshd[18418]: PAM pam_putenv: delete non-existent > entry; DISPLAY > Apr 27 09:05:47 localhost PAM-env[18418]: Unknown PAM_ITEM: > Apr 27 09:05:47 localhost sshd[18418]: PAM pam_putenv: delete non-existent > entry; XAUTHORITY > > where can i change this, without problems? > > TIA > Patrick -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFCcQdYAWKxH5yWMT8RAmJSAJ9imv8ZnKHq5Z8PgnuUuyzKH7SnEQCdGDRW MCMCgAgJ4g7GrXlSZnbL8i8= =CSo6 -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
[gentoo-user] OT:HDTV and PVR
Hello, I just read something in the linux journal about a new law going into effect on July 1 2005, that will prevent anyone from purchasing eqiupment that will allow you to receive HDTV broadcast signals and then record them on your pc or burn them to a DVD. The EFF has more details at http: http://www.eff.org/broadcastflag/ //www.eff.org/broadcastflag/hdtv-introHY.php Is this true? If so, ans anyone used a HDTV capture card that can receive broadcasts over the airwave (not cable or satelitte) and combined it wth Personal Video Recorder software, such as mythtv on Gentoo? Where brand/make of hdtv-receiver-card did you use for your PC? James -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] root password from installation
Panos Laganakos wrote: > Though i did this, i tried rebooting and when i tried to log in as > root, i got the "incorrect password" message once more. Am i doing > something wrong or is there another way of doing it? No, you did everything right. Boot the CD again, mount and chroot. Then create a user, set its passwd and try to log in as user. Does that work? If yes, try to su to root. Does that work too? Christoph -- echo mailto: NOSPAM !#$.'<*>'|sed 's. ..'|tr "<*> !#:2" [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] OT:HDTV and PVR
James ([EMAIL PROTECTED]) scribbled: > Where brand/make of hdtv-receiver-card did you use > for your PC? http://www.pchdtv.com It's *only* over-the-air though. cooper. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] .ebuild from mod_bt ?
raptor wrote: >Anyone to know a .ebuild for mod_bt (torrent tracker) > >mod_bt >http://freshmeat.net/projects/modbt/ > You could try writing one. There are lots of examples in /usr/portage/www-apache using the apache-module.eclass. It's basically just defining some variables. If you succeed, you could submit it through bugs.gentoo.org, and it will get integrated into portage. Christoph -- echo mailto: NOSPAM !#$.'<*>'|sed 's. ..'|tr "<*> !#:2" [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] root password from installation
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Christoph Gysin wrote: > Panos Laganakos wrote: > > >>Though i did this, i tried rebooting and when i tried to log in as >>root, i got the "incorrect password" message once more. Am i doing >>something wrong or is there another way of doing it? > > > > No, you did everything right. > > Boot the CD again, mount and chroot. Then create a user, set its passwd > and try to log in as user. Does that work? If yes, try to su to root. > Does that work too? > > Christoph > Don't forget to add this user to the group 'wheel' - otherwise you can't su! - -- Dirk Raeder I prefer encrypted and signed messages. My GPG key is available at hkp://blackhole.pca.dfn.de with ID 0x05EB5446 Registered Linux user #378554 http://counter.li.org -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFCcSH62QYJ1wXrVEYRAgbzAJ4lRn1xbXDLbOCwZDVVd20H4m+sKACcDwKj OsbMZUaWG3O2DPmptJr3DrM= =bcub -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] USB mouse stalls under X after some time of inactivity
Argghhh ! And the winner is of course Jerry (don't ask about Tom, though). Here comes the solution: When ever doing kernel configuration read the . Sometimes it really s GRRR :-) Snapshot from the help of "USB Human Interface Device (full HID) support" CONFIG_USB_HID: You can't use this driver and the HIDBP (Boot Protocol) keyboard and mouse drivers at the same time. More information is available: . And guess what: I had the standard PS/2 mouse support enabled in the kernel in parallel (for a couple of years, since I installed Linux for the first time :-) ). In germany we have a nice saying for that: "Wer lesen kann ist, klar im Vorteil". (Basically the english translation would mean something like RTFM but in a more polite way :-) ). Thanks for the help and friendly words, guys. :-) BR Thomas Am Mittwoch, den 27.04.2005, 19:18 +0200 schrieb Thomas Drueke: > Yep. :-) > > And appearently it's still not clear who wins... :-( (or better: > GRRR ;-) ) > > Well I upgraded to "udev" now but still no better situation. > > Thomas > > Am Dienstag, den 26.04.2005, 16:10 +0200 schrieb Bastian Balthazar Bux: > > > information is now obvious. Now even the "cat /dev/input/mice" does not > > > bring back my mouse. GRRR. :-) > > > > this seems to be a Tom & Jerry story :) > > > -- > Thomas Drueke <[EMAIL PROTECTED]> > -- Thomas Drueke <[EMAIL PROTECTED]> -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: OT:HDTV and PVR
Jason Cooper lakedaemon.net> writes: > > James (wireless tampabay.rr.com) scribbled: > > Where brand/make of hdtv-receiver-card did you use > > for your PC? > > http://www.pchdtv.com > > It's *only* over-the-air though. That's OK, I was looking at a Samsung SyncMaster 403T 40" display. It has a vga (Dsub 15pin) connector. It's 1280x768 (15:9 aspect ratio). How do I know if this display watches (filters) for the "broadcast flag" over the Dsub 15pin connector or not? James -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] i386-pc-linux-gnu-gcc broken
Hello again I found another two packages with this problem : libgtkhtml-2.3.5 compilation result : orbit-idl-2 2.12.0 compiling mode, show preprocessor errors, passes: stubs skels common headers skel_impl imodule gcc-config error: Could not run/locate "i386-pc-linux-gnu-gcc" Error: Empty file ** (process:13023): WARNING **: ./Editor.idl compilation failed make[3]: *** [Editor.h] Error 1 make[3]: Leaving directory `/var/tmp/portage/libgtkhtml-3.2.5/work/gtkhtml-3.2.5/components/html-editor' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/var/tmp/portage/libgtkhtml-3.2.5/work/gtkhtml-3.2.5/components' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/libgtkhtml-3.2.5/work/gtkhtml-3.2.5' make: *** [all] Error 2 and gthumb-2.6.5. orbit-idl-2 2.12.0 compiling mode, show preprocessor errors, passes: stubs skels common headers skel_impl imodule gcc-config error: Could not run/locate "i386-pc-linux-gnu-gcc" Error: Empty file ** (process:20472): WARNING **: nautilus-view-component.idl compilation failed make[3]: *** [nautilus_view_component_idl_stamp] Error 1 make[3]: Leaving directory `/var/tmp/portage/gthumb-2.6.5/work/gthumb-2.6.5/components/image-viewer' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/var/tmp/portage/gthumb-2.6.5/work/gthumb-2.6.5/components' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/gthumb-2.6.5/work/gthumb-2.6.5' make: *** [all] Error 2 Is it just my problem or anybody of you has it too? Thanks Lubos On 4/27/05, Lubos Kolouch <[EMAIL PROTECTED]> wrote: > Hello, > > (after hours of googling) > > When I do emerge kdegraphics (but also other packages) the compilation > ends with error complaining that the i386-pc-linux-gnu-gcc cannot be > run/located. > > however > > (installed from 2005.3 universal CD) > > # /usr/bin/i386-pc-linux-gnu-gcc > gcc-config error: Could not run/locate "i386-pc-linux-gnu-gcc" > > # ls -l /usr/bin/ | grep i386 > -rwxr-xr-x 1 root root 7196 Mar 10 19:50 i386-pc-linux-gnu-gcc > -rwxr-xr-x 1 root root 47 Mar 10 19:56 i386-pc-linux-gnu-gcc32 > > # gcc-config -l > [1] i686-pc-linux-gnu-3.3.5 * > [2] i686-pc-linux-gnu-3.3.5-hardened > [3] i686-pc-linux-gnu-3.3.5-hardenednopie > [4] i686-pc-linux-gnu-3.3.5-hardenednossp > [5] i686-pc-linux-gnu-3.4.3-20050110 > [6] i686-pc-linux-gnu-3.4.3-20050110-hardened > [7] i686-pc-linux-gnu-3.4.3-20050110-hardenednopie > [8] i686-pc-linux-gnu-3.4.3-20050110-hardenednossp > > Where is the problem? > > Thank you > > Lubos > -- > gentoo-user@gentoo.org mailing list > > -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: OT:HDTV and PVR
James ([EMAIL PROTECTED]) scribbled: > Jason Cooper lakedaemon.net> writes: > > > > > James (wireless tampabay.rr.com) scribbled: > > > Where brand/make of hdtv-receiver-card did you use > > > for your PC? > > > > http://www.pchdtv.com > > > > It's *only* over-the-air though. > > That's OK, I was looking at a Samsung SyncMaster 403T 40" > display. It has a vga (Dsub 15pin) connector. > It's 1280x768 (15:9 aspect ratio). How do I know if this > display watches (filters) for the "broadcast flag" over the > Dsub 15pin connector or not? If the input is VGA, then it has to comply with the VESA VGA standard. There is no broadcast flag there, AFAIK. If it can tune HDTV directly (raw antenna input), then you'll have to check the manual or call the manufacturer. Regardless, if you feed it via the VGA port, then you won't have a problem. cooper. -- gentoo-user@gentoo.org mailing list
[gentoo-user] Getting DVD label naam
Hi, I need to copy 50 DVD's, with a script i create a .iso with mkisofs and then burn it with growisofs. I have seen that this way i looses the DVD naam with is important, how i can i keep/know the original DVD naam so i can use it as a parameter for mkisofs? The machine where the copy is done has no X installed. TIA Patrick -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] USB Mass Storage Device with Gentoo Kernel 2.6.11
On 4/28/05, Daniel Röder <[EMAIL PROTECTED]> wrote: > I try to get my external USB2.0 HDD working with my Gentoo-System with > Kernel 2.6.11-r6. Mine works out of the box on a 2.6.10-r6 system. $ dmesg ... usb 1-1: new high speed USB device using ehci_hcd and address 3 scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning Vendor: TUSB6250 Model: USB20 DISK DRIVE Rev: Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) sda: assuming drive cache: write through SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) sda: assuming drive cache: write through /dev/scsi/host2/bus0/target0/lun0: p1 p2 p3 Attached scsi disk sda at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0 usb-storage: device scan complete and it shows up as /dev/sda. Must be your kernel config. Julien. -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] i386-pc-linux-gnu-gcc broken
> I found another two packages with this problem : > Have you tried "fix_libtool_files.sh 3.3.5"? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Wine with Jack
> Quick question - has anyone had any success running > Windows sound apps in any version of Wine using the Jack > driver? native windows applications don't be jackified. For JACK, there's a jack-vsti plugin to run VSTI plugins on top of JACK using Wine. I've been told that some people got VSTIs running this way. BTW: I guess you can get better answers from the linux audio user mailing list. cu there ;-) Best regards ce -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: OT:HDTV and PVR
Jason Cooper lakedaemon.net> writes: > If the input is VGA, then it has to comply with the VESA VGA standard. > There is no broadcast flag there, AFAIK. If it can tune HDTV directly > (raw antenna input), then you'll have to check the manual or call the > manufacturer. > > Regardless, if you feed it via the VGA port, then you won't have a > problem. Cool beans Last question. Are there any pci buss cards that receive HDTV signal other than terrestrial broadcast, such as satellite or cable or ? If not, then could I receive Cable grade hdtv, divert it into the pchdtv card, record and then send to a monitor? Any other schemes or places to read about schema and equipment? James -- gentoo-user@gentoo.org mailing list
[gentoo-user] sshd publickey only
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Me again. I need to configure the ssh daemon to only accept public-key auth, not password-auth. As far as I am aware, disabling password-auth in /etc/ssh/sshd_config should accomplish this. I did this: # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no PermitEmptyPasswords no RSAAuthentication yes PubkeyAuthentication yes But - I can stil login without pubkey and with password. I did re-start the ssh daemon. This method worked fine on my debian boxen, what am I missing in gentoo? If you need more info - just ask. Regards, - -- Peet Grobler Public PGP key available from wwwkeys.pgp.net http://peet.hivemind.net/PGPKeys.txt -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (MingW32) iD8DBQFCcTzzz77+L65p5ZIRAgyLAKChIOF5HodofPfrb61pSwdG5qFJCwCfcphl ZwqeCnsXKQ7U4U+aeXgxSHg= =hBN1 -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: sshd publickey only
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I had the same problem. The problem is caused by PAM interfering with sshd. To solve it you need to adjust /etc/pam.d/sshd. My file contains - - accountrequired pam_stack.so service=system-auth password required pam_stack.so service=system-auth sessionrequired pam_stack.so service=system-auth auth required /lib/security/pam_warn.so auth required /lib/security/pam_deny.so - - If I remember correctly, the last two lines are the lines you need. HTH Tom Peet Grobler wrote: | Me again. | | I need to configure the ssh daemon to only accept public-key auth, not | password-auth. As far as I am aware, disabling password-auth in | /etc/ssh/sshd_config should accomplish this. I did this: | | # To disable tunneled clear text passwords, change to no here! | PasswordAuthentication no | PermitEmptyPasswords no | RSAAuthentication yes | PubkeyAuthentication yes | | But - I can stil login without pubkey and with password. I did re-start | the ssh daemon. This method worked fine on my debian boxen, what am I | missing in gentoo? | | If you need more info - just ask. | | Regards, | -- | Peet Grobler | | Public PGP key available from wwwkeys.pgp.net | | http://peet.hivemind.net/PGPKeys.txt -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.6 (GNU/Linux) iD8DBQFCcUJYQTaBhxBS2xERAvhZAJ99+7sq+3ZnWdSieAvSCeqp9sJ0/ACfS//l TJLugSit6dvd0ECOD22sLMM= =uCrL -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
[gentoo-user] ATAPI burner recognition fails on kernel 2.6.11
Hi,
I have i865PE based mobo + SATA HDD on /dev/sda (primary/master).
I had to setup BIOS to SATA+PATA (combined) mode, for my burner,
which is secondary/master.
BIOS sees both drives and even (older) Knoppix 3.7 is booting no problem
(ide-scsi module is used for CDRW handling on /dev/scd0).
I like to use CDRW in ATAPI mode, but kernel 2.6.11
(I tried vanilla-sources-2.6.11.7 and also gentoo-sources-2.6.11-r6)
do not recognize my burner, "dmesg |grep hd" shows only SATA HDD.
I tried to add hdx=cdrom (x={a,b,c,d}) to boot prompt, but it doesn't
help at all.
I also replaced the burner with another model without success.
If I replace it with PATA HDD, kernel recognizes it, but the HDD is
accessible via /dev/sdb (probably here the problem is - this is really
a bit strange for me).
There are my relevant kernel options:
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y (ata cdrom)
CONFIG_BLK_DEV_IDEPCI=y
4CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SATA=y
CONFIG_SCSI_ATA_PIIX=y (i865 SATA)
CONFIG_SCSI_QLA2XXX=y (added by ghost)
CONFIG_BLK_DEV_SR=m (scsi cdrom)
Does anybody know, where the problem is ?
Any suggestions appreciated.
(.config of working SATA+PATA kernel would help me too.)
TIA noro
--
gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Getting DVD label naam
On Thu, 28 Apr 2005 20:41:17 +0200 (CEST), Patrick Marquetecken wrote: > I need to copy 50 DVD's, with a script i create a .iso with mkisofs and > then burn it with growisofs. "cp /dev/cdrom somefile.iso" is all you need. There's no need to use mkisofs since the DVD already has an ISO or UDF filesystem. > I have seen that this way i looses the DVD naam with is important, how i > can i keep/know the original DVD naam so i can use it as a parameter for > mkisofs? To grab the original volume name from a DVD, along with plenty of other information, use cd-info, which is part of the libcdio package. -- Neil Bothwick "Bad dog! Leave that wire [EMAIL PROTECTED] TERRIER pgpRhDWdRd1w3.pgp Description: PGP signature
Re: [gentoo-user] sshd publickey only
Peet Grobler <[EMAIL PROTECTED]> writes: > # To disable tunneled clear text passwords, change to no here! > PasswordAuthentication no > PermitEmptyPasswords no > RSAAuthentication yes > PubkeyAuthentication yes > > But - I can stil login without pubkey and with password. I did re-start > the ssh daemon. This method worked fine on my debian boxen, what am I > missing in gentoo? Have you also got UsePAM yes If so then set this to 'no' -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Finally! But a few issues...
On Wed, Apr 27, 2005 at 12:53:29AM -0400, Colin wrote > Finally! I have a working install of Linux 2.6.11-gentoo-r6 on a > Pentium II machine that I plan to use as a portable media center. > (Think of it as an iPod on steroids.) It's probably OK if you intend to run only audio, but video might be a problem. I finally found an excuse to look for a replacement for my 1999-vintage Dell (450 mhz PIII with 128 megs of RAM). I find that mplayer has problems keeping up with 45 kbit/sec "internet TV" streams. You mentioned that your USB is painfully slow. A PII-vintage machine would not have been built with USB 2. It didn't exist back then. You have USB 1.1 at best, i.e. just over 1 megabyte/second. You're *NOT* going to get faster speeds by changing the filesystem on the key or media. The main bottleneck is your old USB hardware. The PII probably would have problems keeping up with USB 2 throughput as well. -- Walter Dnes <[EMAIL PROTECTED]> An infinite number of monkeys pounding away on keyboards will eventually produce a report showing that Windows is more secure, and has a lower TCO, than linux. -- gentoo-user@gentoo.org mailing list
[gentoo-user] Problems with media-libs/libsdl-1.2.8-r1
Tonight - after "emerge --sync" - "emerge -uD world" stops compiling media-libs/libsdl-1.2.8-r1 and says: ... arch=pentium4 -fomit-frame-pointer -Wall -DENABLE_DUMMYVIDEO -DDISKAUD_SUPPORT -DUSE_DLOPEN -DUSE_ASMBLIT -I./hermes -I../../src/hermes -DOSS_SUPPORT -DALSA_SUPPORT -DALSA_DYNAMIC=libasound.so.2 -DUSE_DLVSYM -DARTSC_SUPPORT -DARTSC_DYNAMIC=libartsc.so.0 -I/usr/kde/3.3/include/artsc -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DESD_SUPPORT -DESD_DYNAMIC=libesd.so.0 -DENABLE_X11 -DXTHREADS -I./include -I./src/video -DXFREE86_VM -DXFREE86_VMGAMMA -DXFREE86_XV -DENABLE_SVGALIB -DHAVE_OPENGL -DUSE_INPUT_EVENTS -D_REENTRANT -DSDL_USE_PTHREADS -DHAVE_SIGACTION -I../../include -I../../include/SDL -I../../src -I../../src/main/linux -I../../src/audio -I../../src/video -I../../src/video/XFree86/extensions -I../../src/events -I../../src/joystick -I../../src/cdrom -I../../src/thread -I../../src/timer -I../../src/endian -I../../src/file -I../../src/thread -c SDL_yuv_mmx.c -o SDL_yuv_mmx.o >/dev/null 2>&1 make[3]: *** [SDL_yuv_mmx.lo] Error 1 make[3]: *** Waiting for unfinished jobs i686-pc-linux-gnu-gcc -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL\" -DVERSION=\"1.2.8\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DHAVE_ALLOCA_H=1 -DHAVE_ALLOCA=1 -DHAVE_LIBASOUND=1 -I. -I. -O2 -mcpu=i686 -march=pentium4 -fomit-frame-pointer -Wall -DENABLE_DUMMYVIDEO -DDISKAUD_SUPPORT -DUSE_DLOPEN -DUSE_ASMBLIT -I./hermes -I../../src/hermes -DOSS_SUPPORT -DALSA_SUPPORT -DALSA_DYNAMIC=libasound.so.2 -DUSE_DLVSYM -DARTSC_SUPPORT -DARTSC_DYNAMIC=libartsc.so.0 -I/usr/kde/3.3/include/artsc -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DESD_SUPPORT -DESD_DYNAMIC=libesd.so.0 -DENABLE_X11 -DXTHREADS -I./include -I./src/video -DXFREE86_VM -DXFREE86_VMGAMMA -DXFREE86_XV -DENABLE_SVGALIB -DHAVE_OPENGL -DUSE_INPUT_EVENTS -D_REENTRANT -DSDL_USE_PTHREADS -DHAVE_SIGACTION -I../../include -I../../include/SDL -I../../src -I../../src/main/linux -I../../src/audio -I../../src/video -I../../src/video/XFree86/extensions -I../../src/events -I../../src/joystick -I../../src/cdrom -I../../src/thread -I../../src/timer -I../../src/endian -I../../src/file -I../../src/thread -c SDL_yuv_sw.c -o SDL_yuv_sw.o >/dev/null 2>&1 make[3]: Leaving directory `/var/tmp/portage/libsdl-1.2.8-r1/work/SDL-1.2.8/src/video' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/var/tmp/portage/libsdl-1.2.8-r1/work/SDL-1.2.8/src/video' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/libsdl-1.2.8-r1/work/SDL-1.2.8/src' make: *** [all-recursive] Error 1 !!! ERROR: media-libs/libsdl-1.2.8-r1 failed. !!! Function src_compile, Line 137, Exitcode 2 What should I do? Vittorio -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Problems with media-libs/libsdl-1.2.8-r1
quoth the Vittorio: > What should I do? > > Vittorio Turn off distcc and try again. I have found that some apps refuse to compile when using distcc. I think this solved the same problem for me last night, although it may have been one of the other sdl* packages. -d -- darren kirby :: Part of the problem since 1976 :: http://badcomputer.org "...the number of UNIX installations has grown to 10, with more expected..." - Dennis Ritchie and Ken Thompson, June 1972 pgpEdTB9Q3KjR.pgp Description: PGP signature
Re: [gentoo-user] [OT]Which TV recorder
On Thu, 28 Apr 2005, Tamas Sarga wrote: > Hi, > > I use tvtime for viewing TV. What do you suggest as a simple tv > recorder and why? I just want a simple app. to record from-time > to-time x-station to an AVI. My card uses bt787. Nuppelvideo, a simple low-ressource CLI recorder. Project seems abadoned, too bad! *.nuv filescan be converted/compressed to *.avi with mencoder. Records full tv resolution on my 880 MHz AMD. http://frost.htu.tuwien.ac.at/~roman/nuppelvideo/ Urs -- gentoo-user@gentoo.org mailing list
[gentoo-user] script to recursively unmask a package
Howdy,
I was wanting to install just kdebase-3.4.0 without unmasking all of
kde-3.4.0. The "HOWTO
Update KDE 3.3 to KDE 3.4"
(http://www.gentoo-wiki.com/HOWTO_Update_KDE_3.3_to_KDE_3.4)
suggested running emerge kdebase -p, find a package that is blocking,
then add that package to
/etc/portage/packages.keywords, and repeat until no more packages are
blocking. Tedious.
So here's a perl script to do just that. It will work for any package.
Usage: unmask.pl packageName
-- begin: unmask.pl
#!/usr/bin/perl -w
# quick hack to recursively unmask all packages that are blocking the given
# package from emerging.
# usage: unmask.pl packageName
print "unmasking:=$ARGV[0]\n";
&doit;
exit(0);
# doit()
sub doit {
local $flag = 1;
local $package = $ARGV[0];
while($flag) {
$flag = 0;
open my $fh, "emerge $package -p|" || die "could not open:
emerge $package -p";
while(<$fh>) {
if(/^\-\s+(.*)\-[\d\.]+\s+\(masked
by\:\s+(\~\S+)\s+keyword\)/) {
unmask($1, $2);
$flag = 1;
last;
}
}
close($fh);
}
}
# unmask the file by adding it to /etc/portage/package.keywords
sub unmask
{
local($name, $arch) = @_;
print "unmasking: $name\n";
open my $fh, ">>/etc/portage/package.keywords" || die "can't open
package.keywords: $!";
print $fh "$name $arch\n";
close $fh;
}
-- end: unmask.pl
Have fun,
Roy
--
gentoo-user@gentoo.org mailing list
Re: [gentoo-user] script to recursively unmask a package
Roy O. Wright ([EMAIL PROTECTED]) scribbled: > Howdy, > > I was wanting to install just kdebase-3.4.0 without unmasking all of > kde-3.4.0. The "HOWTO > Update KDE 3.3 to KDE 3.4" > (http://www.gentoo-wiki.com/HOWTO_Update_KDE_3.3_to_KDE_3.4) > suggested running emerge kdebase -p, find a package that is blocking, > then add that package to > /etc/portage/packages.keywords, and repeat until no more packages are > blocking. Tedious. > So here's a perl script to do just that. It will work for any package. > > Usage: unmask.pl packageName > > -- begin: unmask.pl [snip] > -- end: unmask.pl No, no, no... You got it all wrong. We can't have a portage utility with a name that makes sense. You need to rename it to something like 'gunmk' (Gentoo UNMasK). :-) Seriously, though. Nice script. cooper. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Recommendation for online contact manager?
Travis, Check out SugarCRM. We just purchased it for our office. There is a free/professional version. We moved from SalesForce to SugarCRM and it is working very well for us. Sean On Tuesday 26 April 2005 01:15 pm, Travis Osterman wrote: > Does anyone have a good recommendation for a contact information > management system for a relatively small group of people (~200)? I > would prefer web-based and it should allow users to update their own > information easily while allowing everyone easy access to searching > and viewing the directory. > > Thanks for any input. > > -- Travis Osterman -- Sean Higgins, [EMAIL PROTECTED] http://www.systura.com - "Where information becomes knowledge." -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] root password from installation
Christoph Gysin wrote: No, you did everything right. Boot the CD again, mount and chroot. Then create a user, set its passwd and try to log in as user. Does that work? If yes, try to su to root. Does that work too? Christoph You lead me to the answer, thanks :) Apparently i misconfigured the ability of root to login from the shell, but i hope i'll fix. Dirk Raeder wrote: Don't forget to add this user to the group 'wheel' - otherwise you can't su! Thanks for the heads up. :) -- gentoo-user@gentoo.org mailing list
[gentoo-user] gnome config
Hi. Well I decided to try the new gnome 2.10, after previous dissapointments and uninstallations so I painfully unmasked and unkeyworded (?) each dependancy by hand just to find out when starting gnome that it somehow kept my old settings. I tried rming ~/.gnome* ~/.gtk* ~/.gconf*, but to no avail. They were still there. And looking in /etc/ and /usr/share/ didn't yeld anything. Anyone got any thoughts on how I should go about removing my old settings to start from scratch (except creating a new user)? -- Adi -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] script to recursively unmask a package
Vineri 29 Aprilie 2005 01:26, Roy O. Wright a scris:
> Howdy,
>
> I was wanting to install just kdebase-3.4.0 without unmasking all of
> kde-3.4.0. The "HOWTO
> Update KDE 3.3 to KDE 3.4"
> (http://www.gentoo-wiki.com/HOWTO_Update_KDE_3.3_to_KDE_3.4)
> suggested running emerge kdebase -p, find a package that is blocking,
> then add that package to
> /etc/portage/packages.keywords, and repeat until no more packages are
> blocking. Tedious.
> So here's a perl script to do just that. It will work for any package.
>
> Usage: unmask.pl packageName
>
> -- begin: unmask.pl
> #!/usr/bin/perl -w
>
> # quick hack to recursively unmask all packages that are blocking the given
> # package from emerging.
> # usage: unmask.pl packageName
>
> print "unmasking:=$ARGV[0]\n";
>
> &doit;
> exit(0);
>
> # doit()
> sub doit {
> local $flag = 1;
> local $package = $ARGV[0];
>
> while($flag) {
> $flag = 0;
> open my $fh, "emerge $package -p|" || die "could not open:
> emerge $package -p";
> while(<$fh>) {
> if(/^\-\s+(.*)\-[\d\.]+\s+\(masked
> by\:\s+(\~\S+)\s+keyword\)/) {
> unmask($1, $2);
> $flag = 1;
> last;
> }
> }
> close($fh);
> }
> }
>
> # unmask the file by adding it to /etc/portage/package.keywords
> sub unmask
> {
> local($name, $arch) = @_;
> print "unmasking: $name\n";
> open my $fh, ">>/etc/portage/package.keywords" || die "can't open
> package.keywords: $!";
> print $fh "$name $arch\n";
> close $fh;
> }
> -- end: unmask.pl
>
> Have fun,
> Roy
I wish you posted this 2 days ago ... great work! :)
--
Adi
--
gentoo-user@gentoo.org mailing list
Re: [gentoo-user] gnome config
On Fri, 2005-04-29 at 02:25 +0300, Adi wrote: > Hi. > Well I decided to try the new gnome 2.10, after previous dissapointments and > uninstallations so I painfully unmasked and unkeyworded (?) each dependancy > by hand just to find out when starting gnome that it somehow kept my old > settings. I tried rming ~/.gnome* ~/.gtk* ~/.gconf*, but to no avail. They > were still there. And looking in /etc/ and /usr/share/ didn't yeld anything. > Anyone got any thoughts on how I should go about removing my old settings to > start from scratch (except creating a new user)? make sure you are logged out of gnome. Kill all stray gconf processes (gconftool-2 --shutdown ) remove ~/.gnome2 ~/.gconf* And you should be set. The thing is that the gconf process stores its state in RAM, and writes it to disk when it exits. //Spider -- begin .signature Tortured users / Laughing in pain See Microsoft KB Article Q265230 for more information. end signature.asc Description: This is a digitally signed message part
RE: [gentoo-user] Samba start error
On 4/28/05, Richard Watson <[EMAIL PROTECTED]> wrote: > When Samba starts I get the error "lpstat: Unable to connect to server: > Connection refused". It actually doesn't seem to affect much as I can see > the shares I've created but I'm curious. Thanks, Richard This has to do with the printing support of samba, your smb.conf is probably configured to share printers as well as files, and when samba tries to access the print spooler to find out what printers are available it fails to connect. Samba regards this as non-fatal as it can still provide useful services by sharing files and directories. You should be able to find more information about samba's printing support in their HOWTO or FAQ documents. Thanks ... All fixed ... Richard -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.10.4 - Release Date: 27/04/2005 -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: intel 6300esb onboard raid
Scott, I've tryed your tips and found that my RAID controller is software based aka RAID fake... well, I get the gen2dmraid and give it a try but it not found any software RAID at my system. I've discovered that my controller is a intel IHC5 and it's hard to find docummentation to his... I found at the intel CD some drivers for redhat 9 pro, but it refuse to work at RH9 installation and I coudn't unpack the modules.cgz file. Maybe doesn't exists support for this controller at linux yet? I'm thinking that I'll only use RAID in this machine if I do it with software, what sounds bad to me. So any tips would be appreciated. Tks in any advice, Claudinei Matos -- Forwarded message -- From: Scott Storck <[EMAIL PROTECTED]> >Hi guys, > >I'm own a Intel se7210tp1-e with a onboard Intel 6300ESB Raid Controller w/ two 80GB disks >Well, I'm new to this hardware RAID things. My doubt is the follow: > >I've booted gentoo 2005.0 live-cd and when I typed "fdisk -l" I've got two disks printed: >sda and sdb > > If your raid shows both drives under linux, instead of one drive, then it is not a true hardware raid. It is then a hardware raid which need os software support for the raid function. SATA raid is a little strange with kernel 2.6 and gentoo doesn't seem to fully support it yet. As of kernel 2.6 there is a new block device manager called "device mapper". The device mapper is used to support this type of raid controler. Using a tool called "dmraid" you can have the RAID information read out of the disks, and dmraid will construct the device mapper devices which allow you to use the raid as such. After booting a 2005.0 livecd, you can check to see if running "dmsetup ls" shows you a raid device. If so, then the dmraid command and device mapper on the 2005.0 livdcd supports your controler. The dmraid on the 2005.0 livecd has some know problems. The version on the cd is 1.0.0.rc6. Specifically, sometimes it shows the capacitly of RAID 1 devices being less then what it is. Usually by a factor of two. ie 2 x 80GB in RAID 1 makes 80GB, however you end up with only 40GB in your raid. If this is the case, you can't simply use the normal livecd to install. There is a newer version of the "dmraid" tool. (1.0.0.rc7) which however fixes this. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] How do I get IPV6 working?
On Thu, Apr 28, 2005 at 11:57:34AM +0200, Nicolas Litchinko wrote > [1]: http://www.gentoo.org/doc/en/ipv6.xml > [2]: https://tb.ipv6.btexact.com/ Thanks. RTFM is easy. It seems that the hardest part of linux is FTFM, i.e. Find The F.. Manual -- Walter Dnes <[EMAIL PROTECTED]> An infinite number of monkeys pounding away on keyboards will eventually produce a report showing that Windows is more secure, and has a lower TCO, than linux. -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] resume emerge after reboot
No, 'emerge --resume' is lame. It doesn't do what you're thinking it does. What you want is: ebuild merge should do the trick -- at least for the last package that was worked on. To find the last ebuild that was worked on, check /var/log/emerge.log... it'll be one of the last lines in the file. After that, you should be able to just issue the original emerge command, and it should pick up where it left off. > -Original Message- > From: Tamas Sarga [mailto:[EMAIL PROTECTED] > Sent: Thursday, April 28, 2005 4:20 AM > To: gentoo-user@lists.gentoo.org > Subject: [gentoo-user] resume emerge after reboot > > Hi, > > I'd like to do an emerge -e world. It would take 3 days, but I can't > sleep next to my machine, 'cause of the sound of the 7000RPM > CPU cooler. > If I start an emerge, then C-c it, shutdown, start the PC at morning, > can I resume the emerge -e? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: intel 6300esb onboard raid
Software raid has a few advantages. On long lived systems (which any gentoo system should be - install once and modify on the fly), it allows you to move the raid from system to system and across hardware in a much easier and transparent fashion with less risk to your data - did this twice up until one of the ibm "death"stars failed. FS repair may be easier without propriety hardware in between as well. As to speed, my only benchmark was from my Mandrake 7. something days where it was "thought" that linux software raid clearly outperformed the manufacturers softraid approach. Driver maturity may have helped here by now, but then again cpu's have gotten much faster. It was reccomended that the raid controllers be set to ide mode, and just use the linux software raid - in ide mode the controllers were quite good in their own right. I would be interested in other ideas and benchmarks here as I will be going back to a raid zero setup soon (2x 200GB WD sata drives driven from a promise softraid controller - do I use the internal raid for performance, or go with the way I used to do it ?) BillK On Thu, 2005-04-28 at 21:47 -0300, Claudinei Matos wrote: > Scott, > > I've tryed your tips and found that my RAID controller is software > based aka RAID fake... > well, I get the gen2dmraid and give it a try but it not found any > software RAID at my system. > I've discovered that my controller is a intel IHC5 and it's hard to > find docummentation to his... > I found at the intel CD some drivers for redhat 9 pro, but it refuse > to work at RH9 installation and I coudn't unpack the modules.cgz file. > Maybe doesn't exists support for this controller at linux yet? > I'm thinking that I'll only use RAID in this machine if I do it with > software, what sounds bad to me. So any tips would be appreciated. > > > Tks in any advice, > > Claudinei Matos > > -- Forwarded message -- > From: Scott Storck <[EMAIL PROTECTED]> > >Hi guys, > > > >I'm own a Intel se7210tp1-e with a onboard Intel 6300ESB Raid > Controller w/ two 80GB disks > >Well, I'm new to this hardware RAID things. My doubt is the follow: > > > >I've booted gentoo 2005.0 live-cd and when I typed "fdisk -l" I've > got two disks printed: > >sda and sdb > > > > > If your raid shows both drives under linux, instead of one drive, then > it is not a true hardware raid. > It is then a hardware raid which need os software support for the raid > function. > > SATA raid is a little strange with kernel 2.6 and gentoo doesn't seem to > fully support it yet. > As of kernel 2.6 there is a new block device manager called "device mapper". > The device mapper is used to support this type of raid controler. > > Using a tool called "dmraid" you can have the RAID information read out > of the disks, > and dmraid will construct the device mapper devices which allow you to > use the raid as such. > After booting a 2005.0 livecd, you can check to see if running "dmsetup > ls" shows you a raid device. > > If so, then the dmraid command and device mapper on the 2005.0 livdcd > supports your controler. > The dmraid on the 2005.0 livecd has some know problems. The version on > the cd is 1.0.0.rc6. > Specifically, sometimes it shows the capacitly of RAID 1 devices being > less then what it is. > Usually by a factor of two. ie 2 x 80GB in RAID 1 makes 80GB, however > you end up with only 40GB in your raid. > If this is the case, you can't simply use the normal livecd to install. > There is a newer version of the "dmraid" tool. (1.0.0.rc7) which however > fixes this. > -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] ATAPI burner recognition fails on kernel 2.6.11
On Thu, Apr 28, 2005 at 10:09:56PM +0200, Norbert Kamenicky wrote
> Hi,
>
> I have i865PE based mobo + SATA HDD on /dev/sda (primary/master).
> I had to setup BIOS to SATA+PATA (combined) mode, for my burner,
> which is secondary/master.
>
> BIOS sees both drives and even (older) Knoppix 3.7 is booting no problem
> (ide-scsi module is used for CDRW handling on /dev/scd0).
>
> I like to use CDRW in ATAPI mode, but kernel 2.6.11
> (I tried vanilla-sources-2.6.11.7 and also gentoo-sources-2.6.11-r6)
> do not recognize my burner, "dmesg |grep hd" shows only SATA HDD.
>
> I tried to add hdx=cdrom (x={a,b,c,d}) to boot prompt, but it doesn't
> help at all.
You probably have to be root to do the following. Try the command...
cdrecord dev=help >x.txt 2>&1
and look at the contents of x.txt with your favourite text editor or
file viewer. cdrecord sends diagnostic output to stderr, not stdout,
which is why the weird redirection is required.
Look for lines beginning with... "Transp. layer ind.:"
They list the type of transports potentially available. On my system,
the transports listed are ATA: and ATAPI: (plus REMOTE:, which is not
applicable to my system). Therefore, I can use either of...
cdrecord -scanbus dev=ATA:
cdrecord -scanbus dev=ATAPI:
They both generate a list CDROM/DVDROM devices. The "ATA:" version
returns the list immediately, but the "ATAPI:" version spins its wheels
for a few seconds before outputting the list. The available transports
may be different on your system. Can you get any of your available
transport options to return a list?
--
Walter Dnes <[EMAIL PROTECTED]>
An infinite number of monkeys pounding away on keyboards will
eventually produce a report showing that Windows is more secure,
and has a lower TCO, than linux.
--
gentoo-user@gentoo.org mailing list
Re: [gentoo-user] ATAPI burner recognition fails on kernel 2.6.11
Norbert Kamenicky wrote:
>Hi,
>
>I have i865PE based mobo + SATA HDD on /dev/sda (primary/master).
>I had to setup BIOS to SATA+PATA (combined) mode, for my burner,
>which is secondary/master.
>
>BIOS sees both drives and even (older) Knoppix 3.7 is booting no problem
>(ide-scsi module is used for CDRW handling on /dev/scd0).
>
>I like to use CDRW in ATAPI mode, but kernel 2.6.11
>(I tried vanilla-sources-2.6.11.7 and also gentoo-sources-2.6.11-r6)
>do not recognize my burner, "dmesg |grep hd" shows only SATA HDD.
>
>I tried to add hdx=cdrom (x={a,b,c,d}) to boot prompt, but it doesn't
>help at all.
>
>I also replaced the burner with another model without success.
>If I replace it with PATA HDD, kernel recognizes it, but the HDD is
>accessible via /dev/sdb (probably here the problem is - this is really
>a bit strange for me).
>
>There are my relevant kernel options:
>
>CONFIG_IDE=y
>CONFIG_BLK_DEV_IDE=y
>CONFIG_BLK_DEV_IDEDISK=y
>CONFIG_IDEDISK_MULTI_MODE=y
>CONFIG_BLK_DEV_IDECD=y (ata cdrom)
>CONFIG_BLK_DEV_IDEPCI=y
>4CONFIG_BLK_DEV_IDEDMA_PCI=y
>CONFIG_IDEDMA_PCI_AUTO=y
>CONFIG_BLK_DEV_IDEDMA=y
>CONFIG_IDEDMA_AUTO=y
>
>CONFIG_SCSI=y
>CONFIG_SCSI_PROC_FS=y
>CONFIG_SCSI_MULTI_LUN=y
>CONFIG_SCSI_CONSTANTS=y
>CONFIG_SCSI_LOGGING=y
>CONFIG_SCSI_SATA=y
>CONFIG_SCSI_ATA_PIIX=y (i865 SATA)
>CONFIG_SCSI_QLA2XXX=y (added by ghost)
>
>CONFIG_BLK_DEV_SR=m (scsi cdrom)
>
>
>Does anybody know, where the problem is ?
>Any suggestions appreciated.
>(.config of working SATA+PATA kernel would help me too.)
>
>TIA noro
>
>
>
I could be wrong (don't have SATA yet), but I think maybe you also need
one or both of:
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_PIIX=y
-Richard
--
gentoo-user@gentoo.org mailing list
Re: [gentoo-user] USB Mass Storage Device with Gentoo Kernel 2.6.11
Julien Cayzac wrote: >On 4/28/05, Daniel Röder <[EMAIL PROTECTED]> wrote: > > >>I try to get my external USB2.0 HDD working with my Gentoo-System with >>Kernel 2.6.11-r6. >> >> > >Mine works out of the box on a 2.6.10-r6 system. >$ dmesg >... >usb 1-1: new high speed USB device using ehci_hcd and address 3 >scsi2 : SCSI emulation for USB Mass Storage devices >usb-storage: device found at 3 > > BTW, something that happens to me quite often is that the drive comes loose inside the case. When it happens, I get the "new high speed.." message, but not the USB storage messages. You might just want to double check that the drive is still attached to the card...although if the live CD can still recognize it then this isn't the problem. -Richard -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] resume emerge after reboot
On Friday 29 April 2005 10:23, Daevid Vincent wrote: > No, 'emerge --resume' is lame. It doesn't do what you're thinking it does. > > What you want is: > > ebuild merge > > should do the trick -- at least for the last package that was worked > on. To find the last ebuild that was worked on, check > /var/log/emerge.log... it'll be one of the last lines in the file. > > After that, you should be able to just issue the original emerge > command, and it should pick up where it left off. This can be dangerous depending on the package you are trying to resume the compile of. There are also other side-effects of using ebuild (such as packages not being added to world) that will invariably lead to INVALID bugs. Regards, Jason Stubbs -- gentoo-user@gentoo.org mailing list
[gentoo-user] what's the deal with use flags in (brackets)?
i've been noticing lately that the output of emerge -pv is giving me some interesting output: $ emerge -pv mplayer These are the packages that I would merge, in order: Calculating dependencies ...done! [ebuild R ] media-video/mplayer-1.0_pre6-r5 (-3dfx) (-3dnow) +3dnowext +X -aalib +alsa (-altivec) -arts +avi -bidi -bl +cdparanoia +debug +dga -directfb (-divx4linux) -doc +dts +dv +dvb +dvd +dvdread +edl +encode -esd -fbcon -ggi +gif -gtk +i8x0 -ipv6 -jack -joystick +jpeg -libcaca -lirc -live +lzo +mad -matroska -matrox (-mmx) (-mmxext) +mpeg -mythtv -nas +nls -nvidia +oggvorbis +opengl -oss +png +real +rtc -samba -sdl (-sse) (-sse2) (-svga) +tga +theora +truetype +v4l +v4l2 -xanim -xinerama +xmms +xv +xvid -xvmc 0kB what i'm trying to understand here is why so many of the above flags are in brackets and marked with a "-" even though they're clearly enabled in my make.conf file as flags i want to use. most important being mmx, sse, sse2 and divx4linux. can someone please explain to me why these flags are being ignored and what those brackets mean? if you're interested, here's my USE variable in make.conf (i used app-portage/ufed): USE="-* 3dnow 3dnowex 3dnowext X aac acl acpi acpi4linux aim alsa amarok audiofile avantgo avi berkdb bzip2 bzlib cdda cdio cdparanoia cdr chroot codecs css curl debug dga dio divx4linux dnd dts dv dvb dvd dvdr dvdread edl encode exif extraicons faad ffmpeg freetype ftp gd geoip gif gpgme gstreamer i8x0 icq jabber java javascript jpeg jpeg2k kde kdepim libclamav libgd libwww lm_sensors logitech-mouse lzo lzw-tiff mad maildir md5sum mmx mmxext motif moznocompose moznoirc moznomail moznoxft mozp3p mozsvg mp3 mpeg mpeg4 mplayer msn ncurses network nls no-old-linux noamazon nocd oav offensive ogg oggvorbis openal opengl pam pam_chroot pam_timestamp pda pdf pdflib perl png posix povray python qt quicktime rar real rtc sdk session smime sms sox spamassassin spell sql sqlite sqlite3 sse sse2 ssl svg svga tga theora tidy tiff transcode truetype truetype-fonts type1-fonts usb v4l v4l2 vcd vcdimager wmf xface xine xml xml2 xmms xosd xsl xv xvid yahoo zlib" -- gentoo-user@gentoo.org mailing list
[gentoo-user] just another complement
Hi there all Sorry for bothering with such a lamer message, but, from times to times, specially when I set up a new server with Gentoo I feel the need to just say 'Gentoo is GREAT!' Congrats for the great work, thank you very much for such a fantastic system, the astonishing and always up to date documentation. -- []'s Bruno Trevisan [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
[gentoo-user] Will this SATA card work with the Linux Kernel?
I am running Gentoo with kernel 2.6.11-gentoo-r6 and want to add an SATA controller and drive(s) to my PC (as I am out of IDE interfaces!). The SATA controller I am looking at is the Sunix SATA2000, which uses a Silicon Image Sil3112a chipset (Silicon Image SataLink Sil3112CT144 according to http://www.elx.com.au/item/elsPCI-SATA-2P). Can anyone tell me if this particular controller will work and where I can find relevant information on setting it up in the Kernel. Cheers and TIA Jamie -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] what's the deal with use flags in (brackets)?
On Thu, 2005-04-28 at 22:46 -0400, daniel wrote: > i've been noticing lately that the output of emerge -pv is giving me some > interesting output: > > $ emerge -pv mplayer > > These are the packages that I would merge, in order: > > Calculating dependencies ...done! > [ebuild R ] media-video/mplayer-1.0_pre6-r5 (-3dfx) (-3dnow) +3dnowext > +X -aalib +alsa (-altivec) -arts +avi -bidi -bl +cdparanoia +debug +dga > -directfb (-divx4linux) -doc +dts +dv +dvb +dvd +dvdread +edl +encode -esd > -fbcon -ggi +gif -gtk +i8x0 -ipv6 -jack -joystick +jpeg -libcaca -lirc -live > +lzo +mad -matroska -matrox (-mmx) (-mmxext) +mpeg -mythtv -nas +nls -nvidia > +oggvorbis +opengl -oss +png +real +rtc -samba -sdl (-sse) (-sse2) (-svga) > +tga +theora +truetype +v4l +v4l2 -xanim -xinerama +xmms +xv +xvid -xvmc 0kB > > what i'm trying to understand here is why so many of the above flags are in > brackets and marked with a "-" even though they're clearly enabled in my > make.conf file as flags i want to use. most important being mmx, sse, sse2 > and divx4linux. > > can someone please explain to me why these flags are being ignored and what > those brackets mean? if you're interested, here's my USE variable in > make.conf (i used app-portage/ufed): What profile are you using? ls -l /etc/make.profile The parenthesis indicate that the USE flag is masked by your profile. Regards, Paul -- My Gentoo stuff: http://varnerfamily.org/pvarner/gentoo -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] What happened to nautilus Scripts??
On Thu, 2005-04-28 at 11:18 +0100, Edward Catmur wrote: > On Thu, 2005-04-28 at 16:35 +0800, Ow Mun Heng wrote: > > Is There such a thing left?? it used to be that we can select a file, > > right click on it and then select which script we want to execute it > > with. > > The location is ~/.gnome2/nautilus-scripts, if you had them anywhere > else. OK Found it. But still doesn't provide for the option to run them. (yes.. I just touched a script in there. > However, see http://bugs.gentoo.org/show_bug.cgi?id=87719 if you are > using nautilus 2.10 - you will need to unmask and install > shared-mime-info 0.16. I'm on nautilus 2.8.2 and shared-mime-info 0.14 > -- Ow Mun Heng Gentoo/Linux on DELL D600 1.4Ghz 98% Microsoft(tm) Free!! Neuromancer 11:15:33 up 3 days, 1:56, 6 users, load average: 0.34, 0.29, 0.27 -- gentoo-user@gentoo.org mailing list
[gentoo-user] [OT] how to use gnome-vfs
Hello. I have several applications running that said could deal with gnome-vfs, thus being able to operate remote file through ssh. Amone them the bluefish-1.0 would be very useful with gnome-vfs, that means I could operate file on the webserver:) But I don't know how to use gnome-vfs. Every gnoem application opens up the fileopen dialguage like this: http://lemmit.kaplinski.com/home/green/Gnome/images/fileopen.png there is no place for me to type the path. When I was in nautlius I can type: ssh://webserver.realss.com/web/html/file/path And get the file, however in bluefish where do I type the above? also with gphpedit: never know how to operate remote file. Any hints? -- éäèæ Real SoftService http://www.realss.com.cn æææåçè: 0086 592 2086411 Technical Contact: 0086 592 2086411 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] alsaconf doesn't recognize sound card, but kernel does
the first thing to do is see what sort of file alsaconf is: file $(which alsaconf) serva root # file $(which alsaconf) /usr/sbin/alsaconf: Bourne-Again shell script text executable just read the script! On Wed, 27 Apr 2005 15:37:24 +0100 Francisco Santiago Capel Torres wrote: > On Tuesday 26 April 2005 17:04, Mark Knecht wrote: > > It may just be an oversite in alsaconf. Someone should post a bug > > report a the Alsa bug site and let them know to look into it. > > Ok, let's supose I want to debug alsaconf. > > I supose I have to emerge it using some debug flag. Then I want to hack the > code an recompile again. > > How can I do that? Is this the correct approach? Any documentation? > > Regards! > > -- gentoo-user@gentoo.org mailing list
[gentoo-user] kde kwifimanager
Hello I seem to be having a problem with Kwifimanager when i try to run it i get error while loading shared llibraries: libiw.so.28 from my googling and looking around this lib is in wireless-tools i recompiled this package and still no luck, any ideas, thanks. -- LostSon http://www.lostsonsvault.org Public Key http://www.lostsonsvault.org/dls/lostson.asc pgpCTWoNrdwQM.pgp Description: PGP signature
Re: [gentoo-user] kde kwifimanager
On Thursday 28 April 2005 22:35, LostSon wrote: > Hello > I seem to be having a problem with Kwifimanager when i try to run it i get > error while loading shared llibraries: libiw.so.28 > from my googling and looking around this lib is in wireless-tools i > recompiled this package and still no luck, any ideas, thanks. Try recompiling KWifimanager. pgpBk9ZBiSpDS.pgp Description: PGP signature
Re: [gentoo-user] i386-pc-linux-gnu-gcc broken
On 4/28/05, Dave Nebinger <[EMAIL PROTECTED]> wrote: > > I found another two packages with this problem : > > > > Have you tried "fix_libtool_files.sh 3.3.5"? > > -- > gentoo-user@gentoo.org mailing list > > Yes. Not helped. Same problem orbit-idl-2 2.12.0 compiling mode, show preprocessor errors, passes: stubs skels common headers skel_impl imodule gcc-config error: Could not run/locate "i386-pc-linux-gnu-gcc" Error: Empty file ** (process:11762): WARNING **: nautilus-view-component.idl compilation failed make[3]: *** [nautilus_view_component_idl_stamp] Error 1 What to do now? Thanks Lubos -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] USB Mass Storage Device with Gentoo Kernel 2.6.11
Julien Cayzac wrote: > On 4/28/05, Daniel Röder <[EMAIL PROTECTED]> wrote: > >>I try to get my external USB2.0 HDD working with my Gentoo-System with >>Kernel 2.6.11-r6. > > > Mine works out of the box on a 2.6.10-r6 system. > $ dmesg > ... > usb 1-1: new high speed USB device using ehci_hcd and address 3 > scsi2 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 3 > usb-storage: waiting for device to settle before scanning > Vendor: TUSB6250 Model: USB20 DISK DRIVE Rev: > Type: Direct-Access ANSI SCSI revision: 00 > SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) > sda: assuming drive cache: write through > SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) > sda: assuming drive cache: write through > /dev/scsi/host2/bus0/target0/lun0: p1 p2 p3 > Attached scsi disk sda at scsi2, channel 0, id 0, lun 0 > Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0 > usb-storage: device scan complete > > and it shows up as /dev/sda. > > Must be your kernel config. > > Julien. > I figured it out, its the ehci-hcd driver, it seems my drive doesn´t like it. If I only enable uhci-hcd it works fine. Maybe its also the PCI-USB2.0-Card which causes the problem, who knows??? What I test now is, if the speed is OK. Daniel Röder -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] USB Mass Storage Device with Gentoo Kernel 2.6.11
Daniel Röder wrote: > Julien Cayzac wrote: > >>On 4/28/05, Daniel Röder <[EMAIL PROTECTED]> wrote: >> >> >>>I try to get my external USB2.0 HDD working with my Gentoo-System with >>>Kernel 2.6.11-r6. >> >> >>Mine works out of the box on a 2.6.10-r6 system. >>$ dmesg >>... >>usb 1-1: new high speed USB device using ehci_hcd and address 3 >>scsi2 : SCSI emulation for USB Mass Storage devices >>usb-storage: device found at 3 >>usb-storage: waiting for device to settle before scanning >> Vendor: TUSB6250 Model: USB20 DISK DRIVE Rev: >> Type: Direct-Access ANSI SCSI revision: 00 >>SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) >>sda: assuming drive cache: write through >>SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) >>sda: assuming drive cache: write through >> /dev/scsi/host2/bus0/target0/lun0: p1 p2 p3 >>Attached scsi disk sda at scsi2, channel 0, id 0, lun 0 >>Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0 >>usb-storage: device scan complete >> >>and it shows up as /dev/sda. >> >>Must be your kernel config. >> >>Julien. >> > > > I figured it out, its the ehci-hcd driver, it seems my drive doesn´t > like it. If I only enable uhci-hcd it works fine. Maybe its also the > PCI-USB2.0-Card which causes the problem, who knows??? > > What I test now is, if the speed is OK. > > Daniel Röder I figured out the _real_ problem! It is a Hub, which puts the USB-Connectors from the rear of the computer to the front. If I connect the Storage to the front it doesn't work, _but_ if I connect it to the rear, directly to the PCI-Card, it also works with ehci-hcd. Its probably, that the "Hub" doesnt really support USB2.0, also it should, if I belive the Manual ;( . thx for all help, If anybody has other ideas, I'll read... Daniel Röder -- gentoo-user@gentoo.org mailing list
