[Puppet Users] Re: New Puppet report processors...
These will be most useful!! Thank you. How can I test that these are functioning? I have setup the XMPP as well as modified that to send emails. However when I purposely cause a puppet run to fail I do not receive either email or jabber message. Thanks - Trey On May 31, 10:09 am, James Turnbull wrote: > Hi all > > On my TODO list for about a year now has been a tutorial on how easy it > is to write Puppet report processors and how much more you can do with > them than just email/log/store Puppet report data. Rather than write a > whole tutorial I decided to create a whole series of examples of report > processors that should: > > a) Provide some immediate solutions that you can deploy right now, and > > b) Provide good examples of things you can do with report processing > that you can take, fork and modify. > > All of them are released under the Apache 2.0 license. > > In that spirit I've created ten new report processors: > > 1. Reports failed runs to an IRC channel > -https://github.com/jamtur01/puppet-irc > > 2. Reports failed runs and logs to PagerDuty > -https://github.com/jamtur01/puppet-pagerduty > > 3. Reports failed runs to Jabber/XMPP -https://github.com/jamtur01/puppet-xmpp > > 4. Reports failed runs to Twitter -https://github.com/jamtur01/puppet-twitter > > 5. Reports failed runs and logs to Campfire > -https://github.com/jamtur01/puppet-campfire > > 6. Reports failed runs to Twilio -https://github.com/jamtur01/puppet-twilio > > 7. Reports failed runs to Boxcar -https://github.com/jamtur01/puppet-boxcar > > 8. Reports failed runs to HipChat -https://github.com/jamtur01/puppet-hipchat > > 9. Sends metrics to a Ganglia server via gmetric > -https://github.com/jamtur01/puppet-ganglia > > 10. Reports failed runs to Growl -https://github.com/jamtur01/puppet-growl > > Comments, feedback, testing and ideas for other integrations all welcomed. > > Regards > > James > > -- > James Turnbull > Puppet Labs > 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
[Puppet Users] Re: New Puppet report processors...
The report processor was synced to /var/lib/puppet/lib/reports/ . I enabled puppetmaster to run in debug mode but haven't seen anything mentioning reports when I run test runs. I purposly misspelled a module for the puppetmaster and run puppetd --test, but no reports except those in puppet-dashboard. I could be looking in the wrong place. Here's the debug output of the failed puppet run...(hostname replaced) $ puppetd --test --debug -vvv debug: Puppet::Type::User::ProviderDirectoryservice: file /usr/bin/ dscl does not exist debug: Failed to load library 'ldap' for feature 'ldap' debug: Puppet::Type::User::ProviderLdap: feature ldap is missing debug: Puppet::Type::User::ProviderUser_role_add: file rolemod does not exist debug: Puppet::Type::User::ProviderPw: file pw does not exist debug: Puppet::Type::File::ProviderMicrosoft_windows: feature microsoft_windows is missing debug: /File[/var/log/puppet/http.log]: Autorequiring File[/var/log/ puppet] debug: /File[/var/lib/puppet/ssl/public_keys/puppetmaster.domain.pem]: Autorequiring File[/var/lib/puppet/ssl/public_keys] debug: /File[/var/lib/puppet/ssl/private_keys/ puppetmaster.domain.pem]: Autorequiring File[/var/lib/puppet/ssl/ private_keys] debug: /File[/etc/puppet/puppet.conf]: Autorequiring File[/etc/puppet] debug: /File[/var/lib/puppet/state/state.yaml]: Autorequiring File[/ var/lib/puppet/state] debug: /File[/var/lib/puppet/state/last_run_summary.yaml]: Autorequiring File[/var/lib/puppet/state] debug: /File[/var/run/puppet/agent.pid]: Autorequiring File[/var/run/ puppet] debug: /File[/var/lib/puppet/ssl/public_keys]: Autorequiring File[/var/ lib/puppet/ssl] debug: /File[/var/lib/puppet/state]: Autorequiring File[/var/lib/ puppet] debug: /File[/var/lib/puppet/ssl]: Autorequiring File[/var/lib/puppet] debug: /File[/var/lib/puppet/ssl/certs/puppetmaster.domain.pem]: Autorequiring File[/var/lib/puppet/ssl/certs] debug: /File[/var/lib/puppet/lib]: Autorequiring File[/var/lib/puppet] debug: /File[/var/lib/puppet/ssl/private_keys]: Autorequiring File[/ var/lib/puppet/ssl] debug: /File[/var/lib/puppet/client_yaml]: Autorequiring File[/var/lib/ puppet] debug: /File[/var/lib/puppet/ssl/certs/ca.pem]: Autorequiring File[/ var/lib/puppet/ssl/certs] debug: /File[/var/lib/puppet/ssl/private]: Autorequiring File[/var/lib/ puppet/ssl] debug: /File[/var/lib/puppet/clientbucket]: Autorequiring File[/var/ lib/puppet] debug: /File[/var/lib/puppet/ssl/certs]: Autorequiring File[/var/lib/ puppet/ssl] debug: /File[/var/lib/puppet/state/graphs]: Autorequiring File[/var/ lib/puppet/state] debug: /File[/etc/puppet/namespaceauth.conf]: Autorequiring File[/etc/ puppet] debug: /File[/var/lib/puppet/ssl/crl.pem]: Autorequiring File[/var/lib/ puppet/ssl] debug: /File[/var/lib/puppet/ssl/certificate_requests]: Autorequiring File[/var/lib/puppet/ssl] debug: /File[/var/lib/puppet/classes.txt]: Autorequiring File[/var/lib/ puppet] debug: /File[/var/lib/puppet/state/last_run_report.yaml]: Autorequiring File[/var/lib/puppet/state] debug: /File[/var/lib/puppet/facts]: Autorequiring File[/var/lib/ puppet] debug: /File[/var/lib/puppet/client_data]: Autorequiring File[/var/lib/ puppet] debug: Finishing transaction 23786215705400 debug: /File[/etc/puppet/namespaceauth.conf]: Autorequiring File[/etc/ puppet] debug: /File[/var/lib/puppet/ssl/certs/ca.pem]: Autorequiring File[/ var/lib/puppet/ssl/certs] debug: /File[/var/lib/puppet/ssl/crl.pem]: Autorequiring File[/var/lib/ puppet/ssl] debug: /File[/var/lib/puppet/ssl/private_keys]: Autorequiring File[/ var/lib/puppet/ssl] debug: /File[/var/lib/puppet/lib]: Autorequiring File[/var/lib/puppet] debug: /File[/var/lib/puppet/facts]: Autorequiring File[/var/lib/ puppet] debug: /File[/var/lib/puppet/ssl/certificate_requests]: Autorequiring File[/var/lib/puppet/ssl] debug: /File[/var/lib/puppet/ssl/public_keys/puppetmaster.domain.pem]: Autorequiring File[/var/lib/puppet/ssl/public_keys] debug: /File[/var/log/puppet/http.log]: Autorequiring File[/var/log/ puppet] debug: /File[/var/lib/puppet/ssl/certs]: Autorequiring File[/var/lib/ puppet/ssl] debug: /File[/var/lib/puppet/state]: Autorequiring File[/var/lib/ puppet] debug: /File[/var/lib/puppet/ssl/public_keys]: Autorequiring File[/var/ lib/puppet/ssl] debug: /File[/var/lib/puppet/ssl/private]: Autorequiring File[/var/lib/ puppet/ssl] debug: /File[/var/lib/puppet/ssl]: Autorequiring File[/var/lib/puppet] debug: /File[/var/lib/puppet/ssl/private_keys/ puppetmaster.domain.pem]: Autorequiring File[/var/lib/puppet/ssl/ private_keys] debug: /File[/var/lib/puppet/ssl/certs/puppetmaster.domain.pem]: Autorequiring File[/var/lib/puppet/ssl/certs] debug: Finishing transaction 23786215706160 debug: Using cached certificate for ca debug: Using cached certificate for puppetmaster.domain notice: Ignoring --listen on onetime run debug: Finishing transaction 23786215181380 debug: Loaded state in 0.00 seconds info: Retrieving plugin debug: Using cached certificate for ca debug: Using cached certificate for puppetmast
[Puppet Users] Re: New Puppet report processors...
This is the output from master.log during the failed puppet run. [2011-06-07 02:24:16] DEBUG accept: 10.1.0.1:39742 [2011-06-07 02:24:16] DEBUG Puppet::Network::HTTP::WEBrickREST is invoked. [2011-06-07 02:24:16] puppetmaster.domain - - [07/Jun/2011:02:24:16 CDT] "GET /production/file_metadatas/plugins?ignore=---+%0A++-+.svn%0A+ +-+CVS%0A++-+.git&recurse=true&links=manage&checksum_type=md5& HTTP/ 1.1" 200 6336 [2011-06-07 02:24:16] - -> /production/file_metadatas/plugins? ignore=---+%0A++-+.svn%0A++-+CVS%0A++- +.git&recurse=true&links=manage&checksum_type=md5& [2011-06-07 02:24:16] DEBUG close: 10.1.0.1:39742 [2011-06-07 02:24:18] DEBUG accept: 10.1.0.1:39743 [2011-06-07 02:24:18] DEBUG Puppet::Network::HTTP::WEBrickREST is invoked. [2011-06-07 02:24:19] puppetmaster.domain - - [07/Jun/2011:02:24:18 CDT] "GET /production/catalog/puppetmaster.domain?facts=eNp9VdmSqkoWfe %252BvyK6n7vCogMwRN6JxHkDBAYeXihRSRUYzQcCvv4lYdari %250AVF9HSDL3tNZeu9lsgn %252Fj7Fi24%252BMVOalqZkmCUlWdxy5S1SF0UvIvAFCReBim %250AXhypgGNYtsmITUYCDKcKvMrKLYVjWUkATUZQGYbuj2CIVOClxIFR6qUXdEpb %250AKQyzFnIz%252BvgOgwwRFdBLABIcO4iQGDtxFqUqeGPfnus %252BwhEKVKB7UVY8Vzzy %250AfvdwmkG6%252BpbiDNUbCcIeDKIsPCKsAtvIIUZNQQS8CzocYCEQWcDzQGYB02ke %250AFSC4gOWBKwDpCDgF8DKQpKehT%252BP3sLLxXIsTVCUenUlJUhRiFCBIaG5vQkus %250A3WeRd8uQ56rA4WRG7DjiczlCaR5j%252Fx2lF0YFLCe3WIWnX7kl8vW5JPVC9E6Q %250AE0cuLcYbx7EM33llX2FCvBS5Hs2pnRHcDrxj%252B4lUtfz %252BvGJb8nPzBWK3ijik %250AoNHwC1l8fzlxAg9F6R1hUmPXEl9HaHghJD5dEoTWx5dVuBqSC %252FXtwOAPaJg6%250AuJB6wnTLgxaCpxkJMjC6X82%252Bsv7JNslhcsKInmRbIgdG9Tkvga6Lqa %252FvpVKU %250A59PTzY3%252BgU6%252F3QZx7ZSp3nUq1GJCQBOd6shLcgveUeGRlHwjUYXFI45oWL3%252B %250A%252Bgv%252FPgGvSsfKzSoyFAjfyu4R%252BK3obhxCjwb8LcS0TKiVBQ0efzH %252FDRm2hqai%250AEo7jtA4YRtmJdmGGK3K%252F1ez %252BBSaR03phAZ1X6V5FZxiV6amcUn14WX1x%252B8W2%250AS5zhKnGR5b9C %252BQKkw7YY5QNKgoKq8%252BjmEwzIq0wvMy4sn4wVfoqB%252FSMGma0t %250Akgsm0EelCjT66nbmD9hjS4cbPG8nOf21Blo5ny%252BQvFPc %252FY3IOhtvT9m6tHQ5%250AcDeJdWbW%252FN3JudVksZqPH3mjXLYZh %252BQLKd800rHS4Rt4nen2cWDYjaFdrg4T%250AgsTJYGkPDyifFmd %252FZzRM5POZNszFef%252B0XKYY3x%252BHEnLlAOmn4rbJtKMcaooS %250Ac7thlI2Lobidi65ly718uTIW7RAiU0FLRXRZbYih1XY1jgvv%252BDrYnJS2oXfF %250AI9coup0ikJnZ7BY%252FJoouju8X1%252BNng5nDjnU %252F7zHecrk5bxvEO96JFWVS3uVG %250ApdXzhgIcMqXPKZPOoXAUzxdjrYHujt3xoTR2873PGnvLs7ultDqa%252Fb45XUSl %250AmYQz %252BwiPcteY5atFhuDU0lYbY9KLpdgZKQvrr7%252BeGKCIqlwchajqZ9rfbuZU %250Asv5FLByE039stnpekDIE7xUZCH2YqGCdITDNIlCPBa4aC9U8YJjnwPjUtE%252FC %250AU%252B1qCV84VTUuqHj1fShQQk%252BiFAX%252FWf4X7FAcVf89cwN %252Bv3SBZxkA%252FkdbqNMZ %250AjR8f56vM6jlUNw2wa3kHZgDTU4zDeuNz3v0gkB71imnnVXPqreqsXxW1fwXx %250AL6q%252FLx2E2LlQMX525zcFuMQk %252FWEG1mJGuxnhL3UQWspPo4YqEUVjsarDhOmF%250AzoEjlZU2ef5WI %252BHzolr6oiohvH7af%252BM%252BBtXHRKpEkuWkLyJZaXKt5mxLkT40%250A %252BXdX%252Fz9R%252BVTtH6bcS7p%252Fb%252Fnq9lMP3D %252F1wHc6Br3rdTXDeuCztiX9%252FtxaH6Tw%250AshP6hm0HQ32T9e5Tc9tXdtO7I %252BfBNCHrxkOKokeA5cP%252BrC3jvrk%252BaWhzRgfM %250A6numHR2ZwDf1mcnY3KHnN5h %252BxIx2Xd5kr4tp5zobyl2YzGMOrYceF44aUb47%250AQykNikOxyw %252FCWRtMCvsyE4qZVVLRGq8kpW3dLX%252B2FMuOUsU %252FtPojf2d2%252BTl7%250A2pXr %252FsMOLP52RSMpYVaVtk20kdW4ygiWQzwupe6JK9G4XaxLqAyvRNJ7qCiu%250AYr %252FtbPSpYKz2rO1cpJ3FXZyekY%252BHWDqT0VyJ7MlIEc2k0btfTHgTvMU %252BFMb6%250AIdns3dHkEJBcmKbl48iJWec0vuq6gW5Haz %252Fjb9aRa9uasM1M05r6k6RrMUwy %250AXzQaJukSg5sV0Ml1z2ynRy2oEpoMND84zfcMlzxmgWCnhj9v77dizoo2KaKd %250A5k7jK78s8djTFpf5YTUNokUv1S6DIDkd522l0d9aS4aFo51BDuZwnT36Mo70%250Aadze6pNwhKc7MxaWEXtOznrg4%252Bstv4xGflzcZGcQnZLHtEPkxaqUtpO47UTD %250Asz%252FenVDOG8O%252B620H2x7U0NSl%252FC%252BHcGz89Tdq1Ul%252B %250A&facts_format=b64_zlib_yaml HTTP/1.1" 400 104 [2011-06-07 02:24:19] - -> /production/catalog/puppetmaster.domain? facts=eNp9VdmSqkoWfe%252BvyK6n7vCogMwRN6JxHkDBAYeXihRSRUYzQcCvv4lYdari %250AVF9HSDL3tNZeu9lsgn %252Fj7Fi24%252BMVOalqZkmCUlWdxy5S1SF0UvIvAFCReBim %250AXhypgGNYtsmITUYCDKcKvMrKLYVjWUkATUZQGYbuj2CIVOClxIFR6qUXdEpb %250AKQyzFnIz%252BvgOgwwRFdBLABIcO4iQGDtxFqUqeGPfnus %252BwhEKVKB7UVY8Vzzy %250AfvdwmkG6%252BpbiDNUbCcIeDKIsPCKsAtvIIUZNQQS8CzocYCEQWcDzQGYB02ke %250AFSC4gOWBKwDpCDgF8DKQpKehT%252BP3sLLxXIsTVCUenUlJUhRiFCBIaG5vQkus %250A3WeRd8uQ56rA4WRG7DjiczlCaR5j%252Fx2lF0YFLCe3WIWnX7kl8vW5JPVC9E6Q %250AE0cuLcYbx7EM33llX2FCvBS5Hs2pnRHcDrxj%252B4lUtfz %252BvGJb8nPzBWK3ijik %250AoNHwC1l8fzlxAg9F6R1hUmPXEl9HaHghJD5dEoTWx5dVuBqSC %252FXtwOAPaJg6%250AuJB6wnTLgxaCpxkJMjC6X82%252Bsv7JNslhcsKInmRbIgdG9Tkvga6Lqa %252FvpVKU %250A59PTzY3%252BgU6%252F3QZx7ZSp3nUq1GJCQBOd6shLcgveUeGRlHwjUYXFI45oWL3%252B %250A%252Bgv%252FPgGvSsfKzSoyFAjfyu4R%252BK3obhxCjwb8LcS0TKiVBQ0efzH %252FDRm2hqai%250AEo7jtA4YRtmJdmGGK3K%252F1ez %252BBSaR03phAZ1X6V5FZxiV6amcUn14WX1x%252B8W2%250AS5zhKnGR5b9C %252BQKkw7YY5QNKgoKq8%252BjmEwzIq0wvMy4sn4wVfoqB%252FSMGma0t %250Akgsm0EelCjT66nbmD9hjS4cbPG8nOf21Blo5ny%252BQvFPc %252FY3IOhtvT9m6tHQ5%250AcDeJdWbW%252FN3JudVksZqPH3mjXLYZh %252BQLKd800rHS4Rt4nen2cWDYjaFdrg4T%250AgsTJYGkPDyifFmd %252FZzRM5POZNszFef%252B0XKYY3x%252BHEnLlAOmn4rbJtKMcaooS %250Ac7thlI2
[Puppet Users] Re: New Puppet report processors...
Excuse the dumb question, but what file is the default location or what configuration variable defines that location? I've noticed the bulk of puppetmaster logs go either in /var/log/ puppet/masterhttp.log (previous message) or /var/log/message (syslog I'm assuming). Or is there a different place I should be looking? Thanks - Trey On Jun 7, 9:29 am, James Turnbull wrote: > treydock wrote: > > This is the output from master.log during the failed puppet run. > > Sorry I meant the output from the master daemon puppetmasterd or puppet > master. > > Thanks > > James > > -- > James Turnbull > Puppet Labs > 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
[Puppet Users] Re: New Puppet report processors...
Ok I restarted puppetmaster daemon and then broke a module to create a failed puppet run on the same host as the master...and here's /var/log/ messages from that Jun 7 18:37:19 puppetmaster puppet-master[27426]: Reopening log files Jun 7 18:37:19 puppetmaster puppet-master[27426]: Starting Puppet master version 2.6.8 Jun 7 18:37:19 puppetmaster puppet-master[27426]: (mount[files]) allowing * access Jun 7 18:37:19 puppetmaster puppet-master[27426]: (mount[modules]) allowing * access Jun 7 18:37:19 puppetmaster puppet-master[27426]: (mount[plugins]) allowing * access Jun 7 18:37:32 puppetmaster puppet-agent[27636]: Ignoring --listen on onetime run Jun 7 18:37:32 puppetmaster puppet-agent[27636]: Retrieving plugin Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[^/catalog/ ([^/]+)$]) allowing 'method' find Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[^/catalog/ ([^/]+)$]) allowing $1 access Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/ certificate_revocation_list/ca]) allowing 'method' find Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/ certificate_revocation_list/ca]) allowing * access Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/report]) allowing 'method' save Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/report]) allowing * access Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/file]) allowing * access Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/ certificate/ca]) adding authentication no Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/ certificate/ca]) allowing 'method' find Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/ certificate/ca]) allowing * access Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/ certificate/]) adding authentication no Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/ certificate/]) allowing 'method' find Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/ certificate/]) allowing * access Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/ certificate_request]) adding authentication no Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/ certificate_request]) allowing 'method' find Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/ certificate_request]) allowing 'method' save Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/ certificate_request]) allowing * access Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/facts]) adding authentication yes Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/facts]) allowing 'method' find Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/facts]) allowing 'method' search Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/facts]) allowing 'method' save Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/facts]) allowing * access Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/ inventory]) allowing 'method' search Jun 7 18:37:33 puppetmaster puppet-master[27426]: (access[/ inventory]) allowing * access Jun 7 18:37:33 puppetmaster puppet-master[27426]: Inserting default '/ status'(auth) ACL because none were found in '/etc/puppet/auth.conf' Jun 7 18:37:33 puppetmaster puppet-master[27426]: (mount[files]) allowing * access Jun 7 18:37:33 puppetmaster puppet-master[27426]: (mount[modules]) allowing * access Jun 7 18:37:33 puppetmaster puppet-master[27426]: (mount[plugins]) allowing * access Jun 7 18:37:33 puppetmaster puppet-agent[27636]: Loading facts in mysql Jun 7 18:37:33 puppetmaster puppet-agent[27636]: Loading facts in mysql Jun 7 18:37:33 puppetmaster puppet-agent[27636]: Loading facts in mysql Jun 7 18:37:33 puppetmaster puppet-agent[27636]: Loading facts in mysql Jun 7 18:37:36 puppetmaster puppet-master[27426]: Expiring the node cache of puppetmaster.tamu.edu Jun 7 18:37:36 puppetmaster puppet-master[27426]: Not using expired node for puppetmaster.tamu.edu from cache; expired at Tue Jun 07 18:36:36 -0500 2011 Jun 7 18:37:36 puppetmaster puppet-master[27426]: Caching node for puppetmaster.tamu.edu Jun 7 18:37:39 puppetmaster puppet-master[27426]: Could not find class backuppc::clien for puppetmaster.tamu.edu Jun 7 18:37:39 puppetmaster puppet-master[27426]: Could not find class backuppc::clien at /etc/puppet/manifests/nodes.pp:14 on node puppetmaster.tamu.edu Jun 7 18:37:39 puppetmaster puppet-master[27426]: Could not find class backuppc::clien at /etc/puppet/manifests/nodes.pp:14 on node puppetmaster.tamu.edu Jun 7 18:37:39 puppetmaster puppet-agent[27636]: Could not retrieve catalog from remote server: Error 400 on SERVER: Could not find class backuppc::clien at /etc/puppet/manifests/nodes.pp:14 on node puppetmaster.tamu.edu Jun 7 18:37:39 puppetmaster puppet-agent[27636]: Not using cache on failed catalog Jun 7 18:37:39 puppetmaster puppet-agent[27636]: Could not retrieve catalog; skipping run Also that doesn't seem like much debug output...incase I'
[Puppet Users] Re: New Puppet report processors...
My [master] has : report = true reports = http, store, xmpp pluginsync = true The [agent] includes: report = true listen = true pluginsync = true The second agent I tested with also has the same configuration as the above [agent] Correct, the xmpp.yaml has all that information. What I was asking about the remote client not having mail.yaml is I enabled pluginsync on the remove client to see if the results would differ and it failed stating the mail.yaml was missing (locally on the client). But if the repots = xmpp is only defined for [master] then should I not include "pluginsync = true" on the clients? Thanks - Trey On Jun 7, 7:32 pm, James Turnbull wrote: > treydock wrote: > > Ok I restarted puppetmaster daemon and then broke a module to create a > > failed puppet run on the same host as the master...and here's /var/log/ > > messages from that > > Can I confirm you have: > > [master] > report = true > reports = xmpp > > [agent] > report = true > > In your puppet.conf on the master and the [agent] block on the client? > > You mentioned an issue with the xmpp.yaml file? That should have you > Jabber jid, password, target etc and be located in /etc/puppet on the > master - not sync'ed with the module. > > Regards > > James Turnbull > > -- > James Turnbull > Puppet Labs > 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
[Puppet Users] Re: New Puppet report processors...
Hi, These sample reports have been very useful, thanks! Is there is a way to only send a report once every 24 hours (say)? For example, I want to know about failed runs, but not every time someone is hacking around, changing something, re-running etc. I can think of all sorts of workarounds, just wondering if there's something built in to help here. Thanks Craig. -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
[Puppet Users] Re: New Puppet report processors...
I don't have any lines like that no. Could the daemon line for puppetmaster be effecting this? Is the "-- reports" option necessary since my puppet.conf has that specified? PUPPETMASTER_EXTRA_OPTS="--reports puppet_dashboard --debug" Other than that and my puppet.conf I haven't found any further configurations I've implemented effecting use of reports Thanks - Trey On Jun 8, 10:57 am, James Turnbull wrote: > treydock wrote: > > My [master] has : > > > report = true > > reports = http, store, xmpp > > pluginsync = true > > > The [agent] includes: > > report = true > > listen = true > > pluginsync = true > > > The second agent I tested with also has the same configuration as the > > above [agent] > > > Correct, the xmpp.yaml has all that information. What I was asking > > about the remote client not having mail.yaml is I enabled pluginsync > > on the remove client to see if the results would differ and it failed > > stating the mail.yaml was missing (locally on the client). But if the > > repots = xmpp is only defined for [master] then should I not include > > "pluginsync = true" on the clients? > > So you don't have anything like the line: > > "Sending status for name.of.host to XMMP user jabber.user" > > in your Puppet master syslog. > > Regards > > James > > -- > James Turnbull > Puppet Labs > 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
[Puppet Users] Re: New Puppet report processors...
That did it! I'm now getting messages over Jabber upon failure!! Is the debug output you refered to earlier, "Sending status for name.of.host to XMMP user jabber.user" something I would see from Puppet or the Jabber server? I have yet to see similar output, but the IM is now working. Also now that I have this working I tried switching the settings in xmpp.yaml, but am still getting messages on the account from old settings. Is there a cache or location I need to clear for puppet to use the new xmpp.yaml settings? Thanks - Trey On Jun 8, 3:43 pm, James Turnbull wrote: > treydock wrote: > > I don't have any lines like that no. > > > Could the daemon line for puppetmaster be effecting this? Is the "-- > > reports" option necessary since my puppet.conf has that specified? > > > PUPPETMASTER_EXTRA_OPTS="--reports puppet_dashboard --debug" > > > Other than that and my puppet.conf I haven't found any further > > configurations I've implemented effecting use of reports > > Specifying --reports on the command line in PUPPETMASTER_EXTRA_OPTS I am > pretty sure will override the puppet.conf configuration rather than add > to it. I'd take it out of there and put it into puppet.conf on the master. > > Regards > > James Turnbull > > -- > James Turnbull > Puppet Labs > 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
[Puppet Users] Re: New Puppet report processors...
Scratch my last question, had to restart puppetmaster. Thanks again for your help and these plugins - Trey On Jun 8, 5:01 pm, treydock wrote: > That did it! I'm now getting messages over Jabber upon failure!! > > Is the debug output you refered to earlier, "Sending status for > name.of.host to XMMP user jabber.user" something I would see from > Puppet or the Jabber server? I have yet to see similar output, but > the IM is now working. > > Also now that I have this working I tried switching the settings in > xmpp.yaml, but am still getting messages on the account from old > settings. Is there a cache or location I need to clear for puppet to > use the new xmpp.yaml settings? > > Thanks > - Trey > > On Jun 8, 3:43 pm, James Turnbull wrote: > > > > > > > > > treydock wrote: > > > I don't have any lines like that no. > > > > Could the daemon line for puppetmaster be effecting this? Is the "-- > > > reports" option necessary since my puppet.conf has that specified? > > > > PUPPETMASTER_EXTRA_OPTS="--reports puppet_dashboard --debug" > > > > Other than that and my puppet.conf I haven't found any further > > > configurations I've implemented effecting use of reports > > > Specifying --reports on the command line in PUPPETMASTER_EXTRA_OPTS I am > > pretty sure will override the puppet.conf configuration rather than add > > to it. I'd take it out of there and put it into puppet.conf on the master. > > > Regards > > > James Turnbull > > > -- > > James Turnbull > > Puppet Labs > > 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
[Puppet Users] Re: New Puppet report processors...
James, This is all wonderfully helpful and I just spent a little time writing up a Zenoss processor to send an event on failure using XMLRPC::Client, modeled directly after your puppet-zendesk module, replacing the HTTParty guts with XMLRPC guts. I've encountered a problem though (and we can refer to puppet-zendesk code): When I stuff a fail() into a manifest and run, it fails, sends a report to the PM, and the PM logs this: Report zenoss failed: undefined method `status' for # The line in question is from zendesk.rb:25 if self.status == 'failed' ... end So, it's breaking there, but when I replace self.status with "var" and var = 'failed', bypassing the if, the rest of the code works and the event appears in zenoss. I'm running 2.6.4 on the master & client. pluginsync is true on both, and reports = zenoss only on the master for this test. Why is self.status not working for me? On May 31, 8:09 am, James Turnbull wrote: > Hi all > > On my TODO list for about a year now has been a tutorial on how easy it > is to write Puppet report processors and how much more you can do with > them than just email/log/store Puppet report data. Rather than write a > whole tutorial I decided to create a whole series of examples of report > processors that should: > > a) Provide some immediate solutions that you can deploy right now, and > > b) Provide good examples of things you can do with report processing > that you can take, fork and modify. > > All of them are released under the Apache 2.0 license. > > In that spirit I've created ten new report processors: > > 1. Reports failed runs to an IRC channel > -https://github.com/jamtur01/puppet-irc > > 2. Reports failed runs and logs to PagerDuty > -https://github.com/jamtur01/puppet-pagerduty > > 3. Reports failed runs to Jabber/XMPP -https://github.com/jamtur01/puppet-xmpp > > 4. Reports failed runs to Twitter -https://github.com/jamtur01/puppet-twitter > > 5. Reports failed runs and logs to Campfire > -https://github.com/jamtur01/puppet-campfire > > 6. Reports failed runs to Twilio -https://github.com/jamtur01/puppet-twilio > > 7. Reports failed runs to Boxcar -https://github.com/jamtur01/puppet-boxcar > > 8. Reports failed runs to HipChat -https://github.com/jamtur01/puppet-hipchat > > 9. Sends metrics to a Ganglia server via gmetric > -https://github.com/jamtur01/puppet-ganglia > > 10. Reports failed runs to Growl -https://github.com/jamtur01/puppet-growl > > Comments, feedback, testing and ideas for other integrations all welcomed. > > Regards > > James > > -- > James Turnbull > Puppet Labs > 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: New Puppet report processors...
treydock wrote: > These will be most useful!! Thank you. > > How can I test that these are functioning? I have setup the XMPP as > well as modified that to send emails. However when I purposely cause > a puppet run to fail I do not receive either email or jabber message. Is the report processor xmpp.rb pluginsync'ed on your Puppet master? Is there any log out on the Puppet master when you run in --debug mode? Regards James Turnbull -- James Turnbull Puppet Labs 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: New Puppet report processors...
treydock wrote: The report processor was synced to /var/lib/puppet/lib/reports/ . I enabled puppetmaster to run in debug mode but haven't seen anything mentioning reports when I run test runs. I purposly misspelled a module for the puppetmaster and run puppetd --test, but no reports except those in puppet-dashboard. I could be looking in the wrong place. Here's the debug output of the failed puppet run...(hostname replaced) Can I get the master log please. That's where the report is triggered. Regards James -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: New Puppet report processors...
treydock wrote: > This is the output from master.log during the failed puppet run. Sorry I meant the output from the master daemon puppetmasterd or puppet master. Thanks James -- James Turnbull Puppet Labs 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: New Puppet report processors...
treydock wrote: > Excuse the dumb question, but what file is the default location or > what configuration variable defines that location? > > I've noticed the bulk of puppetmaster logs go either in /var/log/ > puppet/masterhttp.log (previous message) or /var/log/message (syslog > I'm assuming). Or is there a different place I should be looking? On the Puppet master it defaults to syslog - so it'll end up in /var/log/messages. Regards James -- James Turnbull Puppet Labs 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: New Puppet report processors...
treydock wrote: > Ok I restarted puppetmaster daemon and then broke a module to create a > failed puppet run on the same host as the master...and here's /var/log/ > messages from that Can I confirm you have: [master] report = true reports = xmpp [agent] report = true In your puppet.conf on the master and the [agent] block on the client? You mentioned an issue with the xmpp.yaml file? That should have you Jabber jid, password, target etc and be located in /etc/puppet on the master - not sync'ed with the module. Regards James Turnbull -- James Turnbull Puppet Labs 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: New Puppet report processors...
treydock wrote: > My [master] has : > > report = true > reports = http, store, xmpp > pluginsync = true > > The [agent] includes: >report = true >listen = true >pluginsync = true > > > The second agent I tested with also has the same configuration as the > above [agent] > > Correct, the xmpp.yaml has all that information. What I was asking > about the remote client not having mail.yaml is I enabled pluginsync > on the remove client to see if the results would differ and it failed > stating the mail.yaml was missing (locally on the client). But if the > repots = xmpp is only defined for [master] then should I not include > "pluginsync = true" on the clients? > > So you don't have anything like the line: "Sending status for name.of.host to XMMP user jabber.user" in your Puppet master syslog. Regards James -- James Turnbull Puppet Labs 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: New Puppet report processors...
Craig wrote: > Hi, > > These sample reports have been very useful, thanks! > > Is there is a way to only send a report once every 24 hours (say)? > For example, I want to know about failed runs, but not every time > someone is hacking around, changing something, re-running etc. > > I can think of all sorts of workarounds, just wondering if there's > something built in to help here. > There isn't currently - all of the report processors that trigger on failed runs trigger on all failed runs. I would suggest as an aside/workaround that you turn off notification-style reporting in your test environment (where I presume people are doing this "hacking around" :) ). My assumption is production Puppet runs that fail are important but you might not care about dev/test so much. Regards James -- James Turnbull Puppet Labs 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: New Puppet report processors...
On 2011 6 8 20:16, "Craig" wrote: > > Hi, > > These sample reports have been very useful, thanks! > > Is there is a way to only send a report once every 24 hours (say)? > For example, I want to know about failed runs, but not every time > someone is hacking around, changing something, re-running etc. > > I can think of all sorts of workarounds, just wondering if there's > something built in to help here. Foreman got a summary report support, where you can see / email an overview over time (eg last 24 hours), and can even filter out results (dont shoe dev hosts). Ohad > Thanks > > Craig. > > -- > You received this message because you are subscribed to the Google Groups "Puppet Users" group. > To post to this group, send email to puppet-users@googlegroups.com. > To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. > For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en. > -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: New Puppet report processors...
treydock wrote: > I don't have any lines like that no. > > Could the daemon line for puppetmaster be effecting this? Is the "-- > reports" option necessary since my puppet.conf has that specified? > > PUPPETMASTER_EXTRA_OPTS="--reports puppet_dashboard --debug" > > Other than that and my puppet.conf I haven't found any further > configurations I've implemented effecting use of reports Specifying --reports on the command line in PUPPETMASTER_EXTRA_OPTS I am pretty sure will override the puppet.conf configuration rather than add to it. I'd take it out of there and put it into puppet.conf on the master. Regards James Turnbull -- James Turnbull Puppet Labs 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: New Puppet report processors...
(possible double-post) James, This is all wonderfully helpful and I just spent a little while writing up a Zenoss processor to send an event on failure using XMLRPC::Client, modeled directly after your puppet-zendesk module, replacing the HTTParty guts with XMLRPC guts. I've encountered a problem though (and we can refer to puppet-zendesk code): When I stuff a fail() into a manifest and run, it fails, sends a report to the PM, and the PM logs this: Report zenoss failed: undefined method `status' for # The line in question is from zendesk.rb:25 if self.status == 'failed' ... end So, it's breaking there, but when I replace self.status with "var" and var = 'failed', bypassing the if, the rest of the code works and the event appears in zenoss. I'm running 2.6.4 on the master & client. pluginsync is true on both, and reports = zenoss only on the master for this test. Why is self.status not working in this case? -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: New Puppet report processors...
Don wrote: > (possible double-post) > > James, > > This is all wonderfully helpful and I just spent a little while > writing up a Zenoss processor to send an event on failure using > XMLRPC::Client, modeled directly after your puppet-zendesk module, > replacing the HTTParty guts with XMLRPC guts. I've encountered a > problem though (and we can refer to puppet-zendesk code): > > When I stuff a fail() into a manifest and run, it fails, sends a > report to the PM, and the PM logs this: > > Report zenoss failed: undefined method `status' for > # > > The line in question is from zendesk.rb:25 > > if self.status == 'failed' > ... > end > > So, it's breaking there, but when I replace self.status with "var" and > var = 'failed', bypassing the if, the rest of the code works and the > event appears in zenoss. > > I'm running 2.6.4 on the master & client. pluginsync is true on both, > and reports = zenoss only on the master for this test. > > Why is self.status not working in this case? > Odd. Can I see the rest of your code? If private you can email me offlist. Regards James -- James Turnbull Puppet Labs 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: New Puppet report processors...
Don wrote: > > I'm running 2.6.4 on the master & client. pluginsync is true on both, > and reports = zenoss only on the master for this test. > > Why is self.status not working in this case? > The issue is that status is only available in the V2 report format in Puppet 2.6.5 and onwards. Before this you need to check for "err" tags to find failed runs. Regards James Turnbull -- James Turnbull Puppet Labs 1-503-734-8571 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: New Puppet report processors...
Thanks for the help off-list, James. here's the stub I'm using to check if the log is error-ful, inside of process(): def process failure = false #iterate through each log object and look for failures self.logs.each do |log| if log.level.to_s == 'err' || 'alert' || 'emerg' || 'crit' failure = true end end if failure Puppet.debug "Creating Zenoss event for failed run on #{self.host}." ### This definitely costs a few more cycles than with 2.6.5+. I'll publish the rest of the Zenoss processor on github tomorrow or Friday. -Don On Wed, Jun 8, 2011 at 5:23 PM, James Turnbull wrote: > Don wrote: > > > > I'm running 2.6.4 on the master & client. pluginsync is true on both, > > and reports = zenoss only on the master for this test. > > > > Why is self.status not working in this case? > > > > The issue is that status is only available in the V2 report format in > Puppet 2.6.5 and onwards. Before this you need to check for "err" tags > to find failed runs. > > Regards > > James Turnbull > > -- > James Turnbull > Puppet Labs > 1-503-734-8571 > > -- > You received this message because you are subscribed to the Google Groups > "Puppet Users" group. > To post to this group, send email to puppet-users@googlegroups.com. > To unsubscribe from this group, send email to > puppet-users+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/puppet-users?hl=en. > > -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: New Puppet report processors...
Ok, here's the report processor to send events to Zenoss, based off James' Zendesk module. https://github.com/donjohnson/puppet-zenoss -Don Release Engineer / Toolsmith, VerticalResponse On Wed, Jun 8, 2011 at 6:09 PM, Don wrote: > Thanks for the help off-list, James. > > here's the stub I'm using to check if the log is error-ful, inside of > process(): > > def process > > failure = false > > #iterate through each log object and look for failures > self.logs.each do |log| > if log.level.to_s == 'err' || 'alert' || 'emerg' || 'crit' > failure = true > end > end > > if failure > Puppet.debug "Creating Zenoss event for failed run on #{self.host}." > ### > > This definitely costs a few more cycles than with 2.6.5+. > > I'll publish the rest of the Zenoss processor on github tomorrow or Friday. > > -Don > > On Wed, Jun 8, 2011 at 5:23 PM, James Turnbull wrote: >> >> Don wrote: >> > >> > I'm running 2.6.4 on the master & client. pluginsync is true on both, >> > and reports = zenoss only on the master for this test. >> > >> > Why is self.status not working in this case? >> > >> >> The issue is that status is only available in the V2 report format in >> Puppet 2.6.5 and onwards. Before this you need to check for "err" tags >> to find failed runs. >> >> Regards >> >> James Turnbull >> >> -- >> James Turnbull >> Puppet Labs >> 1-503-734-8571 >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Puppet Users" group. >> To post to this group, send email to puppet-users@googlegroups.com. >> To unsubscribe from this group, send email to >> puppet-users+unsubscr...@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/puppet-users?hl=en. >> > > -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Re: [Puppet Users] Re: New Puppet report processors...
I'm psyched... I think I have my boss almost ready to implement Zenoss and still only see small benefits to using Dashboard. Craig On Jun 24, 2011, at 10:53 AM, Don wrote: > Ok, here's the report processor to send events to Zenoss, based off > James' Zendesk module. > > https://github.com/donjohnson/puppet-zenoss > > -Don > Release Engineer / Toolsmith, VerticalResponse > > On Wed, Jun 8, 2011 at 6:09 PM, Don wrote: >> Thanks for the help off-list, James. >> >> here's the stub I'm using to check if the log is error-ful, inside of >> process(): >> >> def process >> >> failure = false >> >> #iterate through each log object and look for failures >> self.logs.each do |log| >> if log.level.to_s == 'err' || 'alert' || 'emerg' || 'crit' >> failure = true >> end >> end >> >> if failure >> Puppet.debug "Creating Zenoss event for failed run on #{self.host}." >> ### >> >> This definitely costs a few more cycles than with 2.6.5+. >> >> I'll publish the rest of the Zenoss processor on github tomorrow or Friday. >> >> -Don >> >> On Wed, Jun 8, 2011 at 5:23 PM, James Turnbull wrote: >>> >>> Don wrote: I'm running 2.6.4 on the master & client. pluginsync is true on both, and reports = zenoss only on the master for this test. Why is self.status not working in this case? >>> >>> The issue is that status is only available in the V2 report format in >>> Puppet 2.6.5 and onwards. Before this you need to check for "err" tags >>> to find failed runs. >>> >>> Regards >>> >>> James Turnbull >>> >>> -- >>> James Turnbull >>> Puppet Labs >>> 1-503-734-8571 >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Puppet Users" group. >>> To post to this group, send email to puppet-users@googlegroups.com. >>> To unsubscribe from this group, send email to >>> puppet-users+unsubscr...@googlegroups.com. >>> For more options, visit this group at >>> http://groups.google.com/group/puppet-users?hl=en. >>> >> >> > > -- > You received this message because you are subscribed to the Google Groups > "Puppet Users" group. > To post to this group, send email to puppet-users@googlegroups.com. > To unsubscribe from this group, send email to > puppet-users+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/puppet-users?hl=en. > -- Craig White ~~ craig.wh...@ttiltd.com 1.800.869.6908 ~~~ www.ttiassessments.com Need help communicating between generations at work to achieve your desired success? Let us help! -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.